lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230821175739.81188-10-saeed@kernel.org> Date: Mon, 21 Aug 2023 10:57:34 -0700 From: Saeed Mahameed <saeed@...nel.org> To: "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Eric Dumazet <edumazet@...gle.com> Cc: Saeed Mahameed <saeedm@...dia.com>, netdev@...r.kernel.org, Tariq Toukan <tariqt@...dia.com>, Rahul Rameshbabu <rrameshbabu@...dia.com>, Gal Pressman <gal@...dia.com> Subject: [net-next V2 09/14] net/mlx5: Update dead links in Kconfig documentation From: Rahul Rameshbabu <rrameshbabu@...dia.com> Point to NVIDIA documentation for device specific information now that the Mellanox documentation site is deprecated. Refer to kernel documentation sources for generic information not specific to mlx5 devices. Signed-off-by: Rahul Rameshbabu <rrameshbabu@...dia.com> Reviewed-by: Gal Pressman <gal@...dia.com> Signed-off-by: Saeed Mahameed <saeedm@...dia.com> --- .../ethernet/mellanox/mlx5/kconfig.rst | 14 +++++++------- Documentation/networking/xfrm_device.rst | 1 + 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst index 43b1f7e87ec4..0a42c3395ffa 100644 --- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst +++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst @@ -36,7 +36,7 @@ Enabling the driver and kconfig options **CONFIG_MLX5_CORE_EN_DCB=(y/n)**: -| Enables `Data Center Bridging (DCB) Support <https://community.mellanox.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_. +| Enables `Data Center Bridging (DCB) Support <https://enterprise-support.nvidia.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_. **CONFIG_MLX5_CORE_IPOIB=(y/n)** @@ -59,12 +59,12 @@ Enabling the driver and kconfig options **CONFIG_MLX5_EN_ARFS=(y/n)** | Enables Hardware-accelerated receive flow steering (arfs) support, and ntuple filtering. -| https://community.mellanox.com/s/article/howto-configure-arfs-on-connectx-4 +| https://enterprise-support.nvidia.com/s/article/howto-configure-arfs-on-connectx-4 **CONFIG_MLX5_EN_IPSEC=(y/n)** -| Enables `IPSec XFRM cryptography-offload acceleration <https://support.mellanox.com/s/article/ConnectX-6DX-Bluefield-2-IPsec-HW-Full-Offload-Configuration-Guide>`_. +| Enables :ref:`IPSec XFRM cryptography-offload acceleration <xfrm_device>`. **CONFIG_MLX5_EN_MACSEC=(y/n)** @@ -87,8 +87,8 @@ Enabling the driver and kconfig options | Ethernet SRIOV E-Switch support in ConnectX NIC. E-Switch provides internal SRIOV packet steering | and switching for the enabled VFs and PF in two available modes: -| 1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://community.mellanox.com/s/article/howto-configure-sr-iov-for-connectx-4-connectx-5-with-kvm--ethernet-x>`_. -| 2) `Switchdev mode (eswitch offloads) <https://www.mellanox.com/related-docs/prod_software/ASAP2_Hardware_Offloading_for_vSwitches_User_Manual_v4.4.pdf>`_. +| 1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://enterprise-support.nvidia.com/s/article/HowTo-Configure-SR-IOV-for-ConnectX-4-ConnectX-5-ConnectX-6-with-KVM-Ethernet>`_. +| 2) :ref:`Switchdev mode (eswitch offloads) <switchdev>`. **CONFIG_MLX5_FPGA=(y/n)** @@ -101,13 +101,13 @@ Enabling the driver and kconfig options **CONFIG_MLX5_INFINIBAND=(y/n/m)** (module mlx5_ib.ko) -| Provides low-level InfiniBand/RDMA and `RoCE <https://community.mellanox.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support. +| Provides low-level InfiniBand/RDMA and `RoCE <https://enterprise-support.nvidia.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support. **CONFIG_MLX5_MPFS=(y/n)** | Ethernet Multi-Physical Function Switch (MPFS) support in ConnectX NIC. -| MPFs is required for when `Multi-Host <http://www.mellanox.com/page/multihost>`_ configuration is enabled to allow passing +| MPFs is required for when `Multi-Host <https://www.nvidia.com/en-us/networking/multi-host/>`_ configuration is enabled to allow passing | user configured unicast MAC addresses to the requesting PF. diff --git a/Documentation/networking/xfrm_device.rst b/Documentation/networking/xfrm_device.rst index 83abdfef4ec3..535077cbeb07 100644 --- a/Documentation/networking/xfrm_device.rst +++ b/Documentation/networking/xfrm_device.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. _xfrm_device: =============================================== XFRM device - offloading the IPsec computations -- 2.41.0
Powered by blists - more mailing lists