[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230821204258.GA2253571-robh@kernel.org>
Date: Mon, 21 Aug 2023 15:42:58 -0500
From: Rob Herring <robh@...nel.org>
To: Christophe Leroy <christophe.leroy@...roup.eu>
Cc: Herve Codina <herve.codina@...tlin.com>, "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Lee Jones <lee@...nel.org>, Linus Walleij <linus.walleij@...aro.org>, Qiang Zhao <qiang.zhao@....com>, Li Yang <leoyang.li@....com>, Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>, Shengjiu Wang <shengjiu.wang@...il.com>, Xiubo Li <Xiubo.Lee@...il.com>, Fabio Estevam <festevam@...il.com>, Nicolin Chen <nicoleotsuka@...il.com>, Randy Dunlap <rdunlap@...radead.org>, netdev@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, alsa-devel@...a-project.org, Thomas Petazzoni <thomas
.petazzoni@...tlin.com>
Subject: Re: [PATCH v4 06/28] dt-bindings: net: Add support for QMC HDLC
On Fri, Aug 18, 2023 at 06:39:00PM +0200, Christophe Leroy wrote:
> From: Herve Codina <herve.codina@...tlin.com>
>
> The QMC (QUICC mutichannel controller) is a controller present in some
> PowerQUICC SoC such as MPC885.
> The QMC HDLC uses the QMC controller to transfer HDLC data.
>
> Additionally, a framer can be connected to the QMC HDLC.
> If present, this framer is the interface between the TDM bus used by the
> QMC HDLC and the E1/T1 line.
> The QMC HDLC can use this framer to get information about the E1/T1 line
> and configure the E1/T1 line.
>
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
> ---
> .../devicetree/bindings/net/fsl,qmc-hdlc.yaml | 46 +++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> new file mode 100644
> index 000000000000..13f3572f0feb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/fsl,qmc-hdlc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale/NXP QUICC Multichannel Controller (QMC) HDLC
> +
> +maintainers:
> + - Herve Codina <herve.codina@...tlin.com>
> +
> +description: |
Don't need '|'
> + The QMC HDLC uses a QMC (QUICC Multichannel Controller) channel to transfer
> + HDLC data.
> +
> +properties:
> + compatible:
> + const: fsl,qmc-hdlc
> +
> + fsl,qmc-chan:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to QMC node
> + - description: Channel number
> + description:
> + Should be a phandle/number pair. The phandle to QMC node and the QMC
> + channel to use.
> +
> + framer:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to the framer node
What's the framer?
> +
> +required:
> + - compatible
> + - fsl,qmc-chan
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + hdlc {
> + compatible = "fsl,qmc-hdlc";
> + fsl,qmc-chan = <&qmc 16>;
Where does this node live?
QMC is this[1]? Why don't you just add the compatible to channel@10 in
the QMC node?
Rob
[1] Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
Powered by blists - more mailing lists