| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c1707845-af5b-7967-514a-102818afc6da@intel.com>
Date: Wed, 23 Aug 2023 15:23:38 -0700
From: Paul M Stillwell Jr <paul.m.stillwell.jr@...el.com>
To: Leon Romanovsky <leon@...nel.org>, Tony Nguyen
<anthony.l.nguyen@...el.com>
CC: <davem@...emloft.net>, <kuba@...nel.org>, <pabeni@...hat.com>,
<edumazet@...gle.com>, <netdev@...r.kernel.org>, <jacob.e.keller@...el.com>,
<horms@...nel.org>, Pucha Himasekhar Reddy
<himasekharx.reddy.pucha@...el.com>
Subject: Re: [PATCH net-next v3 2/5] ice: configure FW logging
On 8/15/2023 11:38 AM, Leon Romanovsky wrote:
> On Tue, Aug 15, 2023 at 09:57:47AM -0700, Tony Nguyen wrote:
>> From: Paul M Stillwell Jr <paul.m.stillwell.jr@...el.com>
>>
>> Users want the ability to debug FW issues by retrieving the
>> FW logs from the E8xx devices. Use debugfs to allow the user to
>> read/write the FW log configuration by adding a 'fwlog/modules' file.
>> Reading the file will show either the currently running configuration or
>> the next configuration (if the user has changed the configuration).
>> Writing to the file will update the configuration, but NOT enable the
>> configuration (that is a separate command).
>>
>> To see the status of FW logging then read the 'fwlog/modules' file like
>> this:
>>
>> cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules
>>
>> To change the configuration of FW logging then write to the 'fwlog/modules'
>> file like this:
>>
>> echo DCB NORMAL > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules
>>
>> The format to change the configuration is
>>
>> echo <fwlog_module> <fwlog_level> > /sys/kernel/debug/ice/<pci device
>
> This line is truncated, it is not clear where you are writing.
Fixed
> And more general question, a long time ago, netdev had a policy of
> not-allowing writing to debugfs, was it changed?
>
>>
>> where
>>
>> * fwlog_level is a name as described below. Each level includes the
>> messages from the previous/lower level
>>
>> * NONE
>> * ERROR
>> * WARNING
>> * NORMAL
>> * VERBOSE
>>
>> * fwlog_event is a name that represents the module to receive events for.
>> The module names are
>>
>> * GENERAL
>> * CTRL
>> * LINK
>> * LINK_TOPO
>> * DNL
>> * I2C
>> * SDP
>> * MDIO
>> * ADMINQ
>> * HDMA
>> * LLDP
>> * DCBX
>> * DCB
>> * XLR
>> * NVM
>> * AUTH
>> * VPD
>> * IOSF
>> * PARSER
>> * SW
>> * SCHEDULER
>> * TXQ
>> * RSVD
>> * POST
>> * WATCHDOG
>> * TASK_DISPATCH
>> * MNG
>> * SYNCE
>> * HEALTH
>> * TSDRV
>> * PFREG
>> * MDLVER
>> * ALL
>>
>> The name ALL is special and specifies setting all of the modules to the
>> specified fwlog_level.
>>
>> If the NVM supports FW logging then the file 'fwlog' will be created
>> under the PCI device ID for the ice driver. If the file does not exist
>> then either the NVM doesn't support FW logging or debugfs is not enabled
>> on the system.
>>
>> In addition to configuring the modules, the user can also configure the
>> number of log messages (resolution) to include in a single Admin Receive
>> Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128
>> means push only when the max AQ command buffer is full). The suggested
>> value is 10.
>>
>> To see/change the resolution the user can read/write the
>> 'fwlog/resolution' file. An example changing the value to 50 is
>>
>> echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/resolution
>>
>> Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@...el.com>
>> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@...el.com> (A Contingent worker at Intel)
>> Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
>> ---
>> drivers/net/ethernet/intel/ice/Makefile | 4 +-
>> drivers/net/ethernet/intel/ice/ice.h | 18 +
>> .../net/ethernet/intel/ice/ice_adminq_cmd.h | 80 ++++
>> drivers/net/ethernet/intel/ice/ice_common.c | 5 +
>> drivers/net/ethernet/intel/ice/ice_debugfs.c | 450 ++++++++++++++++++
>> drivers/net/ethernet/intel/ice/ice_fwlog.c | 231 +++++++++
>> drivers/net/ethernet/intel/ice/ice_fwlog.h | 55 +++
>> drivers/net/ethernet/intel/ice/ice_main.c | 21 +
>> drivers/net/ethernet/intel/ice/ice_type.h | 4 +
>> 9 files changed, 867 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/net/ethernet/intel/ice/ice_debugfs.c
>> create mode 100644 drivers/net/ethernet/intel/ice/ice_fwlog.c
>> create mode 100644 drivers/net/ethernet/intel/ice/ice_fwlog.h
>>
>> diff --git a/drivers/net/ethernet/intel/ice/Makefile b/drivers/net/ethernet/intel/ice/Makefile
>> index 960277d78e09..d43a59e5f8ee 100644
>> --- a/drivers/net/ethernet/intel/ice/Makefile
>> +++ b/drivers/net/ethernet/intel/ice/Makefile
>> @@ -34,7 +34,8 @@ ice-y := ice_main.o \
>> ice_lag.o \
>> ice_ethtool.o \
>> ice_repr.o \
>> - ice_tc_lib.o
>> + ice_tc_lib.o \
>> + ice_fwlog.o
>> ice-$(CONFIG_PCI_IOV) += \
>> ice_sriov.o \
>> ice_virtchnl.o \
>> @@ -49,3 +50,4 @@ ice-$(CONFIG_RFS_ACCEL) += ice_arfs.o
>> ice-$(CONFIG_XDP_SOCKETS) += ice_xsk.o
>> ice-$(CONFIG_ICE_SWITCHDEV) += ice_eswitch.o ice_eswitch_br.o
>> ice-$(CONFIG_GNSS) += ice_gnss.o
>> +ice-$(CONFIG_DEBUG_FS) += ice_debugfs.o
>> diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
>> index 5ac0ad12f9f1..e6dd9f6f9eee 100644
>> --- a/drivers/net/ethernet/intel/ice/ice.h
>> +++ b/drivers/net/ethernet/intel/ice/ice.h
>> @@ -556,6 +556,8 @@ struct ice_pf {
>> struct ice_vsi_stats **vsi_stats;
>> struct ice_sw *first_sw; /* first switch created by firmware */
>> u16 eswitch_mode; /* current mode of eswitch */
>> + struct dentry *ice_debugfs_pf;
>> + struct dentry *ice_debugfs_pf_fwlog;
>> struct ice_vfs vfs;
>> DECLARE_BITMAP(features, ICE_F_MAX);
>> DECLARE_BITMAP(state, ICE_STATE_NBITS);
>> @@ -861,6 +863,22 @@ static inline bool ice_is_adq_active(struct ice_pf *pf)
>> return false;
>> }
>>
>> +#ifdef CONFIG_DEBUG_FS
>
> There is no need in this CONFIG_DEBUG_FS and code should be written
> without debugfs stubs.
>
Fixed
>> +void ice_debugfs_fwlog_init(struct ice_pf *pf);
>> +void ice_debugfs_init(void);
>> +void ice_debugfs_exit(void);
>> +void ice_pf_fwlog_update_module(struct ice_pf *pf, int log_level, int module);
>> +#else
>> +static inline void ice_debugfs_fwlog_init(struct ice_pf *pf) { }
>> +static inline void ice_debugfs_init(void) { }
>> +static inline void ice_debugfs_exit(void) { }
>> +static void
>> +ice_pf_fwlog_update_module(struct ice_pf *pf, int log_level, int module)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +#endif /* CONFIG_DEBUG_FS */
>
> Thanks
Powered by blists - more mailing lists