netdev - [PATCH net-next 03/10] net: stmmac: clean up passing fwnode to phylink

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1qZAXD-005pTv-TN@rmk-PC.armlinux.org.uk>
Date: Thu, 24 Aug 2023 14:38:03 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	 Jose Abreu <joabreu@...opsys.com>
Cc: Andrew Lunn <andrew@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Feiyang Chen <chenfeiyang@...ngson.cn>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Jakub Kicinski <kuba@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-stm32@...md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	netdev@...r.kernel.org,
	Paolo Abeni <pabeni@...hat.com>
Subject: [PATCH net-next 03/10] net: stmmac: clean up passing fwnode to
 phylink

Move the initialisation of the fwnode variable closer to its use
site, rather than scattered throughout stmmac_phy_setup().

Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a2dfb624e10c..7d97166194b5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1200,9 +1200,9 @@ static int stmmac_init_phy(struct net_device *dev)
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
-	struct fwnode_handle *fwnode = priv->plat->port_node;
 	int max_speed = priv->plat->max_speed;
 	int mode = priv->plat->phy_interface;
+	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
 
 	priv->phylink_config.dev = &priv->dev->dev;
@@ -1211,9 +1211,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		priv->phylink_config.ovr_an_inband =
 			mdio_bus_data->xpcs_an_inband;
 
-	if (!fwnode)
-		fwnode = dev_fwnode(priv->device);
-
 	/* Set the platform/firmware specified interface mode */
 	__set_bit(mode, priv->phylink_config.supported_interfaces);
 
@@ -1254,6 +1251,10 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 			~(MAC_10HD | MAC_100HD | MAC_1000HD);
 	priv->phylink_config.mac_managed_pm = true;
 
+	fwnode = priv->plat->port_node;
+	if (!fwnode)
+		fwnode = dev_fwnode(priv->device);
+
 	phylink = phylink_create(&priv->phylink_config, fwnode,
 				 mode, &stmmac_phylink_mac_ops);
 	if (IS_ERR(phylink))
-- 
2.30.2