| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230825062836.103744-2-saeed@kernel.org>
Date: Thu, 24 Aug 2023 23:28:29 -0700
From: Saeed Mahameed <saeed@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Eric Dumazet <edumazet@...gle.com>
Cc: Saeed Mahameed <saeedm@...dia.com>,
netdev@...r.kernel.org,
Tariq Toukan <tariqt@...dia.com>,
Jiri Pirko <jiri@...dia.com>,
Leon Romanovsky <leonro@...dia.com>,
Dima Chumak <dchumak@...dia.com>
Subject: [PATCH net-next V4 1/8] devlink: Expose port function commands to control IPsec crypto offloads
From: Dima Chumak <dchumak@...dia.com>
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@...dia.com>
Signed-off-by: Leon Romanovsky <leonro@...dia.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
.../networking/devlink/devlink-port.rst | 27 ++++++++++
include/net/devlink.h | 15 ++++++
include/uapi/linux/devlink.h | 2 +
net/devlink/leftover.c | 52 +++++++++++++++++++
4 files changed, 96 insertions(+)
diff --git a/Documentation/networking/devlink/devlink-port.rst b/Documentation/networking/devlink/devlink-port.rst
index 3da590953ce8..6983b11559cb 100644
--- a/Documentation/networking/devlink/devlink-port.rst
+++ b/Documentation/networking/devlink/devlink-port.rst
@@ -128,6 +128,9 @@ Users may also set the RoCE capability of the function using
Users may also set the function as migratable using
'devlink port function set migratable' command.
+Users may also set the IPsec crypto capability of the function using
+`devlink port function set ipsec_crypto` command.
+
Function attributes
===================
@@ -240,6 +243,30 @@ Attach VF to the VM.
Start the VM.
Perform live migration.
+IPsec crypto capability setup
+-----------------------------
+When user enables IPsec crypto capability for a VF, user application can offload
+XFRM state crypto operation (Encrypt/Decrypt) to this VF.
+
+When IPsec crypto capability is disabled (default) for a VF, the XFRM state is
+processed in software by the kernel.
+
+- Get IPsec crypto capability of the VF device::
+
+ $ devlink port show pci/0000:06:00.0/2
+ pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
+ function:
+ hw_addr 00:00:00:00:00:00 ipsec_crypto disabled
+
+- Set IPsec crypto capability of the VF device::
+
+ $ devlink port function set pci/0000:06:00.0/2 ipsec_crypto enable
+
+ $ devlink port show pci/0000:06:00.0/2
+ pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
+ function:
+ hw_addr 00:00:00:00:00:00 ipsec_crypto enabled
+
Subfunction
============
diff --git a/include/net/devlink.h b/include/net/devlink.h
index f7fec0791acc..1cf07a820a0e 100644
--- a/include/net/devlink.h
+++ b/include/net/devlink.h
@@ -1583,6 +1583,15 @@ void devlink_free(struct devlink *devlink);
* Should be used by device drivers set
* the admin state of a function managed
* by the devlink port.
+ * @port_fn_ipsec_crypto_get: Callback used to get port function's ipsec_crypto
+ * capability. Should be used by device drivers
+ * to report the current state of ipsec_crypto
+ * capability of a function managed by the devlink
+ * port.
+ * @port_fn_ipsec_crypto_set: Callback used to set port function's ipsec_crypto
+ * capability. Should be used by device drivers to
+ * enable/disable ipsec_crypto capability of a
+ * function managed by the devlink port.
*
* Note: Driver should return -EOPNOTSUPP if it doesn't support
* port function (@port_fn_*) handling for a particular port.
@@ -1620,6 +1629,12 @@ struct devlink_port_ops {
int (*port_fn_state_set)(struct devlink_port *port,
enum devlink_port_fn_state state,
struct netlink_ext_ack *extack);
+ int (*port_fn_ipsec_crypto_get)(struct devlink_port *devlink_port,
+ bool *is_enable,
+ struct netlink_ext_ack *extack);
+ int (*port_fn_ipsec_crypto_set)(struct devlink_port *devlink_port,
+ bool enable,
+ struct netlink_ext_ack *extack);
};
void devlink_port_init(struct devlink *devlink,
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 3782d4219ac9..f9ae9a058ad2 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -661,6 +661,7 @@ enum devlink_resource_unit {
enum devlink_port_fn_attr_cap {
DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT,
DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT,
+ DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT,
/* Add new caps above */
__DEVLINK_PORT_FN_ATTR_CAPS_MAX,
@@ -669,6 +670,7 @@ enum devlink_port_fn_attr_cap {
#define DEVLINK_PORT_FN_CAP_ROCE _BITUL(DEVLINK_PORT_FN_ATTR_CAP_ROCE_BIT)
#define DEVLINK_PORT_FN_CAP_MIGRATABLE \
_BITUL(DEVLINK_PORT_FN_ATTR_CAP_MIGRATABLE_BIT)
+#define DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO _BITUL(DEVLINK_PORT_FN_ATTR_CAP_IPSEC_CRYPTO_BIT)
enum devlink_port_function_attr {
DEVLINK_PORT_FUNCTION_ATTR_UNSPEC,
diff --git a/net/devlink/leftover.c b/net/devlink/leftover.c
index e2cd13958cc2..fcc1a06cae48 100644
--- a/net/devlink/leftover.c
+++ b/net/devlink/leftover.c
@@ -492,6 +492,28 @@ static int devlink_port_fn_migratable_fill(struct devlink_port *devlink_port,
return 0;
}
+static int devlink_port_fn_ipsec_crypto_fill(struct devlink_port *devlink_port,
+ struct nla_bitfield32 *caps,
+ struct netlink_ext_ack *extack)
+{
+ bool is_enable;
+ int err;
+
+ if (!devlink_port->ops->port_fn_ipsec_crypto_get ||
+ devlink_port->attrs.flavour != DEVLINK_PORT_FLAVOUR_PCI_VF)
+ return 0;
+
+ err = devlink_port->ops->port_fn_ipsec_crypto_get(devlink_port, &is_enable, extack);
+ if (err) {
+ if (err == -EOPNOTSUPP)
+ return 0;
+ return err;
+ }
+
+ devlink_port_fn_cap_fill(caps, DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO, is_enable);
+ return 0;
+}
+
static int devlink_port_fn_caps_fill(struct devlink_port *devlink_port,
struct sk_buff *msg,
struct netlink_ext_ack *extack,
@@ -508,6 +530,10 @@ static int devlink_port_fn_caps_fill(struct devlink_port *devlink_port,
if (err)
return err;
+ err = devlink_port_fn_ipsec_crypto_fill(devlink_port, &caps, extack);
+ if (err)
+ return err;
+
if (!caps.selector)
return 0;
err = nla_put_bitfield32(msg, DEVLINK_PORT_FN_ATTR_CAPS, caps.value,
@@ -838,6 +864,13 @@ devlink_port_fn_roce_set(struct devlink_port *devlink_port, bool enable,
extack);
}
+static int
+devlink_port_fn_ipsec_crypto_set(struct devlink_port *devlink_port, bool enable,
+ struct netlink_ext_ack *extack)
+{
+ return devlink_port->ops->port_fn_ipsec_crypto_set(devlink_port, enable, extack);
+}
+
static int devlink_port_fn_caps_set(struct devlink_port *devlink_port,
const struct nlattr *attr,
struct netlink_ext_ack *extack)
@@ -862,6 +895,13 @@ static int devlink_port_fn_caps_set(struct devlink_port *devlink_port,
if (err)
return err;
}
+ if (caps.selector & DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO) {
+ err = devlink_port_fn_ipsec_crypto_set(devlink_port, caps_value &
+ DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO,
+ extack);
+ if (err)
+ return err;
+ }
return 0;
}
@@ -1226,6 +1266,18 @@ static int devlink_port_function_validate(struct devlink_port *devlink_port,
return -EOPNOTSUPP;
}
}
+ if (caps.selector & DEVLINK_PORT_FN_CAP_IPSEC_CRYPTO) {
+ if (!ops->port_fn_ipsec_crypto_set) {
+ NL_SET_ERR_MSG_ATTR(extack, attr,
+ "Port doesn't support ipsec_crypto function attribute");
+ return -EOPNOTSUPP;
+ }
+ if (devlink_port->attrs.flavour != DEVLINK_PORT_FLAVOUR_PCI_VF) {
+ NL_SET_ERR_MSG_ATTR(extack, attr,
+ "ipsec_crypto function attribute supported for VFs only");
+ return -EOPNOTSUPP;
+ }
+ }
}
return 0;
}
--
2.41.0
Powered by blists - more mailing lists