Message-ID: <b5jay65dndlpzdu7qjxa5ty5vudz62h3xosiu7mjdjvzieoylq@sk7h7erb25bd>
Date: Wed, 30 Aug 2023 13:16:31 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Andrew Halaney <ahalaney@...hat.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>, 
	Jose Abreu <joabreu@...opsys.com>, "David S. Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, 
	Paolo Abeni <pabeni@...hat.com>, Maxime Coquelin <mcoquelin.stm32@...il.com>, 
	Richard Cochran <richardcochran@...il.com>, netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, 
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 6/7] net: stmmac: Fix comment about default
 addend calculation

On Tue, Aug 29, 2023 at 10:01:20AM -0500, Andrew Halaney wrote:
> On Sun, Aug 27, 2023 at 03:02:07AM +0300, Serge Semin wrote:
> > Hi Andrew
> > 
> > On Thu, Aug 24, 2023 at 01:32:57PM -0500, Andrew Halaney wrote:
> > > The comment neglects that freq_div_ratio is the ratio between
> > > the subsecond increment frequency and the clk_ptp_rate frequency.
> > > 
> > > Signed-off-by: Andrew Halaney <ahalaney@...hat.com>
> > > ---
> > >  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 ++++++----
> > >  1 file changed, 6 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > index dfead0df6163..64185753865f 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > @@ -853,10 +853,12 @@ int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags)
> > >  	/* Store sub second increment for later use */
> > >  	priv->sub_second_inc = sub_second_inc;
> > >  
> > 
> > > -	/* calculate default addend value:
> > > -	 * formula is :
> > > -	 * addend = (2^32)/freq_div_ratio;
> > > -	 * where, freq_div_ratio = 1e9ns/sub_second_inc
> > > +	/* Calculate default addend so the accumulator overflows (2^32) in
> > > +	 * sub_second_inc (ns). The addend is added to the accumulator
> > > +	 * every clk_ptp cycle.
> > > +	 *
> > > +	 * addend = (2^32) / freq_div_ratio
> > > +	 * where, freq_div_ratio = (1e9ns / sub_second_inc) / clk_ptp_rate
> > >  	 */
> > >  	temp = div_u64(NSEC_PER_SEC, sub_second_inc);
> > >  	temp = temp << 32;
> > 
> > I am not well familiar with the way PTP works but at my naked eyes the
> > calculation implemented here looks a bit different than what is
> > described in the comment.
> > 
> > Basically config_sub_second_increment(clk_ptp_rate, sub_second_inc)
> > returns clk_ptp_rate period in nanoseconds or twice that period, or have it
> > scaled up on 0.465. So we have one of the next formulae:
> > X1 = NSEC_PER_SEC / clk_ptp_rate
> > X2 = 2 * NSEC_PER_SEC / clk_ptp_rate
> > X3 = X1 / 0.465
> > X4 = X2 / 0.465
> 

> X5 = PTP_SSIR_SSINC_MAX (0xFF) is a case as well to consider

I noticed that option too, but then I thought it must have been not
that much probable to be considered as a real case seeing it's a
boundary case. The clamping happens if
if (X1 > 255 || X2 > 255 || X3 > 255 || X4 > 255)
	X5 = 255
so in the worst case PTP-rate period in nanoseconds multiplied by 4.3
must be greater than 255 which is equivalent to X1 >= 60. It means
PTP clock rate must be greater than 16.6MHz to avoid the clamping. In
the best case - 3.9MHz. I doubted that these limits are crossed in
reality. But in anyways you are right saying that it still needs to be
taken into account in case if the implemented algo would be a subject
for optimizations.

> > 
> > Then stmmac_init_tstamp_counter() handles the retrieved period in the
> > next manner:
> > temp = div_u64(NSEC_PER_SEC, sub_second_inc);     // Convert back to frequency
> > temp = temp << 32;                                // multiply by 2^32
> > addend = div_u64(temp, priv->plat->clk_ptp_rate); // Divide by clk_ptp_rate
> > 
> > The code above is equivalent:
> > 
> > addend = ((NSEC_PER_SEC / X) * 2^32 ) / clk_ptp_rate = 
> >          (2^32 * NSEC_PER_SEC / X) / clk_ptp_rate = 
> >          2^32 / (clk_ptp_rate / (NSEC_PER_SEC / X))
> > 
> > AFAICS this doesn't match to what is in the comment (X = sub_second_inc).
> > freq_div_ratio gets to be inverted. Does it?
> 

> You're right, my comment needs to be inverted to match all of the above
> (which is a great recap, thank you!).

Good. Then an hour spent for decyphering of that stuff wasn't a waste
of time after all.)

> 
> > 
> > Substituting X to the formulae above we'll have just four possible results:
> > addend1 = 2^32
> > addend2 = 2^32 / 2
> > addend3 = 0.465 * 2^32
> > addend4 = 0.465 * 2^32 / 2
>
> addend5 = 2^32 / (clk_ptp_rate / (NSEC_PER_SEC / 0xFF))
> 
> I think that would be the PTP_SSIR_SSINC_MAX case (X5) I inserted above
> 
> > 
> > So basically clk_ptp_rate is irrelevant (neglecting all the
> > integer divisions rounding). Is that what implied by the implemented
> > algo?
> > 
> > Am I missing something? (it's quite possible since it's long past
> > midnight already.)
> 
> I believe you've captured everything, minus the one conditional I added.
> 
> I think because of that conditional we can't just nicely code up some
> contants here independent of sub_second_inc. Now I can blame the morning
> and not enough coffee, do you see anything wrong with that thought

I am not that much aware of the PTP internals but it just seems weird
to have clk_ptp_rate not affecting anything except the boundary case.
Do you have a DW *MAC HW databook with the PTP-engine chapter
describing the way the System Time Register Module works?

> process? I'm all ears for suggestions for cleaning this up, especially
> since others like Richard have indicated that it could use some love,

* I would have said more definitive - some _hard_ love.)

> but right now I'm hung up thinking the best I can do is fix the bad
> comment in this patch.

Just at the first very swift glance:
1. See attached patch.
2. Exporting stmmac_init_tstamp_counter() isn't necessary. It doesn't
seem like being utilized anywhere except in the stmmac_main.c module.
3. stmmac_hwtimestamp-based abstraction seems redundant since: just a
single PTP implementation is provided; DW GMAC, DW XGMAC and DW QoS
Eth PTP implementations don't seem like very much different (XGMAC and
QoS Eth seems to have some additional features but the basics looks
the same). Moreover developing a HW-abstraction without having all the
IP-core databooks at hands and having at least two different engines
description seems like a needless over-complication of the code. I
have doubts it was possible to create a comprehensive enough
sub-module to be suitable for the real and any other not yet known PTP
engine.)
4. For the same reason as 2. splitting up the PTP support into two
files seems redundant. stmmac_hwtstamp.c content can be moved to
stmmac_ptp.c .
5. ...

3 and 5 imply bulky and delicate work which I would have attempted
only after much deeper PTP engine studying in all the DW *MAC IP-cores
(I might have missed something) and only having a real PTP-charged
device at hands.

-Serge(y)

> 
> Thanks for the review!
> - Andrew
> 
> 

View attachment "0001-net-stmmac-Stop-overriding-the-PTP-clock-info-static.patch" of type "text/x-patch" (3571 bytes)

Powered by blists - more mailing lists