[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <831bc700-a9a2-7eda-e97b-e1d54dc806f9@oss.nxp.com>
Date: Fri, 1 Sep 2023 14:58:12 +0300
From: "Radu Pirea (OSS)" <radu-nicolae.pirea@....nxp.com>
To: Sabrina Dubroca <sd@...asysnail.net>,
Radu Pirea <radu-nicolae.pirea@....com>
Cc: "atenart@...nel.org" <atenart@...nel.org>, "andrew@...n.ch"
<andrew@...n.ch>, "linux@...linux.org.uk" <linux@...linux.org.uk>,
"hkallweit1@...il.com" <hkallweit1@...il.com>,
"davem@...emloft.net" <davem@...emloft.net>,
Sebastian Tobuschat <sebastian.tobuschat@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"pabeni@...hat.com" <pabeni@...hat.com>,
"richardcochran@...il.com" <richardcochran@...il.com>,
"edumazet@...gle.com" <edumazet@...gle.com>,
"kuba@...nel.org" <kuba@...nel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [RFC net-next v2 5/5] net: phy: nxp-c45-tja11xx: implement
mdo_insert_tx_tag
On 01.09.2023 13:07, Sabrina Dubroca wrote:
...
>
>>> And what happens in this case?
>>> ip link add link eth0 type macsec offload phy
>>> ip link set eth0 down
>>> ip macsec add macsec0 rx sci ...
>>> ip macsec add macsec0 tx sa 0 ...
>>> # etc
>>> ip link set eth0 up
>>>
>>> Will offload work with the current code?
>>
>> (the interface was up before)
>> [root@...rm ~]# ip link add link end0 macsec0 type macsec encrypt on
>> offload phy
>> [root@...rm ~]# ip link set end0 down
>> [root@...rm ~]# ip macsec add macsec0 rx port 1 address
>> 00:01:be:be:ef:33
>> RTNETLINK answers: Operation not supported
>
> Where does that EOPNOTSUPP come from? nxp_c45_mdo_add_rxsc from this
> version of the code can't return that, and macsec_add_rxsc also
> shouldn't at this point.
This is the source of -EOPNOTSUPP
https://elixir.bootlin.com/linux/latest/source/drivers/net/macsec.c#L1928
--
Radu P.
Powered by blists - more mailing lists