netdev - Re: [PATCH v3 RFC 2/4] net: dsa: Extend ksz9477 TAG setup to support HSR frames duplication

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230905110056.gzkaiznlq5hcvrac@skbuf>
Date: Tue, 5 Sep 2023 14:00:56 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Lukasz Majewski <lukma@...x.de>
Cc: Eric Dumazet <edumazet@...gle.com>, Andrew Lunn <andrew@...n.ch>,
	davem@...emloft.net, Paolo Abeni <pabeni@...hat.com>,
	Woojung Huh <woojung.huh@...rochip.com>, Tristram.Ha@...rochip.com,
	Florian Fainelli <f.fainelli@...il.com>,
	Jakub Kicinski <kuba@...nel.org>, UNGLinuxDriver@...rochip.com,
	George McCollister <george.mccollister@...il.com>,
	Oleksij Rempel <o.rempel@...gutronix.de>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 RFC 2/4] net: dsa: Extend ksz9477 TAG setup to support
 HSR frames duplication

On Tue, Sep 05, 2023 at 12:44:09PM +0200, Lukasz Majewski wrote:
> > Not to mention that there are other problems with the "dev->hsr_ports"
> > concept. For example, having a hsr0 over lan0 and lan1, and a hsr1
> > over lan2 and lan3, would set dev->hsr_ports to GENMASK(3, 0).
> 
> I doubt that having two hsr{01} interfaces is possible with current
> kernel.

You mean 2 hsr{01} interfaces not being able to coexist in general,
or just "offloaded" ones?

> The KSZ9477 allows only to have 2 ports of 5 available as HSR
> ones.
> 
> The same is with earlier chip xrs700x (but this have even bigger
> constrain - there only ports 1 and 2 can support HSR). 

> > > +	if (dev->features & NETIF_F_HW_HSR_DUP) {
> > > +		val &= ~KSZ9477_TAIL_TAG_LOOKUP;  
> > 
> > No need to unset a bit which was never set.
> 
> I've explicitly followed the vendor's guidelines - the TAG_LOOKUP needs
> to be cleared.
> 
> But if we can assure that it is not set here I can remove it.

Let's look at ksz9477_xmit(), filtering only for changes to "u16 val".

static struct sk_buff *ksz9477_xmit(struct sk_buff *skb,
				    struct net_device *dev)
{
	u16 val;

	val = BIT(dp->index);

	val |= FIELD_PREP(KSZ9477_TAIL_TAG_PRIO, prio);

	if (is_link_local_ether_addr(hdr->h_dest))
		val |= KSZ9477_TAIL_TAG_OVERRIDE;

	if (dev->features & NETIF_F_HW_HSR_DUP) {
		val &= ~KSZ9477_TAIL_TAG_LOOKUP;
		val |= ksz_hsr_get_ports(dp->ds);
	}
}

Is KSZ9477_TAIL_TAG_LOOKUP ever set in "val", or am I missing something?

> > > +		val |= ksz_hsr_get_ports(dp->ds);
> > > +	}  
> > 
> > Would this work instead?
> > 
> > 	struct net_device *hsr_dev = dp->hsr_dev;
> > 	struct dsa_port *other_dp;
> > 
> > 	dsa_hsr_foreach_port(other_dp, dp->ds, hsr_dev)
> > 		val |= BIT(other_dp->index);
> > 
> 
> I thought about this solution as well, but I've been afraid, that going
> through the loop of all 5 ports each time we want to send single packet
> will reduce the performance.
> 
> Hence, the idea with having the "hsr_ports" set once during join
> function and then use this cached value afterwards.

There was a quote about "premature optimization" which I can't quite remember...

If you can see a measurable performance difference, then the list
traversal can be converted to something more efficient.

In this case, struct dsa_port :: hsr_dev can be converted to a larger
struct dsa_hsr structure, similar to struct dsa_port :: bridge.
That structure could look like this:

struct dsa_hsr {
	struct net_device *dev;
	unsigned long port_mask;
	refcount_t refcount;
};

and you could replace the list traversal with "val |= dp->hsr->port_mask".
But a more complex solution requires a justification, which in this case
is performance-related. So performance data must be gathered.

FWIW, dsa_master_find_slave() also performs a list traversal.
But similar discussions about performance improvements didn't lead anywhere.