| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230911202715.147400-3-anthony.l.nguyen@intel.com>
Date: Mon, 11 Sep 2023 13:27:15 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net,
kuba@...nel.org,
pabeni@...hat.com,
edumazet@...gle.com,
netdev@...r.kernel.org
Cc: Brett Creeley <brett.creeley@...el.com>,
anthony.l.nguyen@...el.com,
bcreeley@....com,
Ahmed Zaki <ahmed.zaki@...el.com>,
Rafal Romanowski <rafal.romanowski@...el.com>
Subject: [PATCH net v2 2/2] iavf: Fix promiscuous mode configuration flow messages
From: Brett Creeley <brett.creeley@...el.com>
Currently when configuring promiscuous mode on the AVF we detect a
change in the netdev->flags. We use IFF_PROMISC and IFF_ALLMULTI to
determine whether or not we need to request/release promiscuous mode
and/or multicast promiscuous mode. The problem is that the AQ calls for
setting/clearing promiscuous/multicast mode are treated separately. This
leads to a case where we can trigger two promiscuous mode AQ calls in
a row with the incorrect state. To fix this make a few changes.
Use IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE instead of the previous
IAVF_FLAG_AQ_[REQUEST|RELEASE]_[PROMISC|ALLMULTI] flags.
In iavf_set_rx_mode() detect if there is a change in the
netdev->flags in comparison with adapter->flags and set the
IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE aq_required bit. Then in
iavf_process_aq_command() only check for IAVF_FLAG_CONFIGURE_PROMISC_MODE
and call iavf_set_promiscuous() if it's set.
In iavf_set_promiscuous() check again to see which (if any) promiscuous
mode bits have changed when comparing the netdev->flags with the
adapter->flags. Use this to set the flags which get sent to the PF
driver.
Add a spinlock that is used for updating current_netdev_promisc_flags
and only allows one promiscuous mode AQ at a time.
[1] Fixes the fact that we will only have one AQ call in the aq_required
queue at any one time.
[2] Streamlines the change in promiscuous mode to only set one AQ
required bit.
[3] This allows us to keep track of the current state of the flags and
also makes it so we can take the most recent netdev->flags promiscuous
mode state.
[4] This fixes the problem where a change in the netdev->flags can cause
IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE to be set in iavf_set_rx_mode(),
but cleared in iavf_set_promiscuous() before the change is ever made via
AQ call.
Fixes: 47d3483988f6 ("i40evf: Add driver support for promiscuous mode")
Signed-off-by: Brett Creeley <brett.creeley@...el.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@...el.com>
Tested-by: Rafal Romanowski <rafal.romanowski@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
drivers/net/ethernet/intel/iavf/iavf.h | 16 ++--
drivers/net/ethernet/intel/iavf/iavf_main.c | 43 +++++------
.../net/ethernet/intel/iavf/iavf_virtchnl.c | 75 ++++++++++++-------
3 files changed, 74 insertions(+), 60 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h
index 85fba85fbb23..738e25657c6b 100644
--- a/drivers/net/ethernet/intel/iavf/iavf.h
+++ b/drivers/net/ethernet/intel/iavf/iavf.h
@@ -298,8 +298,6 @@ struct iavf_adapter {
#define IAVF_FLAG_CLIENT_NEEDS_OPEN BIT(10)
#define IAVF_FLAG_CLIENT_NEEDS_CLOSE BIT(11)
#define IAVF_FLAG_CLIENT_NEEDS_L2_PARAMS BIT(12)
-#define IAVF_FLAG_PROMISC_ON BIT(13)
-#define IAVF_FLAG_ALLMULTI_ON BIT(14)
#define IAVF_FLAG_LEGACY_RX BIT(15)
#define IAVF_FLAG_REINIT_ITR_NEEDED BIT(16)
#define IAVF_FLAG_QUEUES_DISABLED BIT(17)
@@ -325,10 +323,7 @@ struct iavf_adapter {
#define IAVF_FLAG_AQ_SET_HENA BIT_ULL(12)
#define IAVF_FLAG_AQ_SET_RSS_KEY BIT_ULL(13)
#define IAVF_FLAG_AQ_SET_RSS_LUT BIT_ULL(14)
-#define IAVF_FLAG_AQ_REQUEST_PROMISC BIT_ULL(15)
-#define IAVF_FLAG_AQ_RELEASE_PROMISC BIT_ULL(16)
-#define IAVF_FLAG_AQ_REQUEST_ALLMULTI BIT_ULL(17)
-#define IAVF_FLAG_AQ_RELEASE_ALLMULTI BIT_ULL(18)
+#define IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE BIT_ULL(15)
#define IAVF_FLAG_AQ_ENABLE_VLAN_STRIPPING BIT_ULL(19)
#define IAVF_FLAG_AQ_DISABLE_VLAN_STRIPPING BIT_ULL(20)
#define IAVF_FLAG_AQ_ENABLE_CHANNELS BIT_ULL(21)
@@ -365,6 +360,12 @@ struct iavf_adapter {
(IAVF_EXTENDED_CAP_SEND_VLAN_V2 | \
IAVF_EXTENDED_CAP_RECV_VLAN_V2)
+ /* Lock to prevent possible clobbering of
+ * current_netdev_promisc_flags
+ */
+ spinlock_t current_netdev_promisc_flags_lock;
+ netdev_features_t current_netdev_promisc_flags;
+
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
@@ -551,7 +552,8 @@ void iavf_add_ether_addrs(struct iavf_adapter *adapter);
void iavf_del_ether_addrs(struct iavf_adapter *adapter);
void iavf_add_vlans(struct iavf_adapter *adapter);
void iavf_del_vlans(struct iavf_adapter *adapter);
-void iavf_set_promiscuous(struct iavf_adapter *adapter, int flags);
+void iavf_set_promiscuous(struct iavf_adapter *adapter);
+bool iavf_promiscuous_mode_changed(struct iavf_adapter *adapter);
void iavf_request_stats(struct iavf_adapter *adapter);
int iavf_request_reset(struct iavf_adapter *adapter);
void iavf_get_hena(struct iavf_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 7b300c86ceda..36b94ee44211 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -1188,6 +1188,16 @@ static int iavf_addr_unsync(struct net_device *netdev, const u8 *addr)
return 0;
}
+/**
+ * iavf_promiscuous_mode_changed - check if promiscuous mode bits changed
+ * @adapter: device specific adapter
+ */
+bool iavf_promiscuous_mode_changed(struct iavf_adapter *adapter)
+{
+ return (adapter->current_netdev_promisc_flags ^ adapter->netdev->flags) &
+ (IFF_PROMISC | IFF_ALLMULTI);
+}
+
/**
* iavf_set_rx_mode - NDO callback to set the netdev filters
* @netdev: network interface device structure
@@ -1201,19 +1211,10 @@ static void iavf_set_rx_mode(struct net_device *netdev)
__dev_mc_sync(netdev, iavf_addr_sync, iavf_addr_unsync);
spin_unlock_bh(&adapter->mac_vlan_list_lock);
- if (netdev->flags & IFF_PROMISC &&
- !(adapter->flags & IAVF_FLAG_PROMISC_ON))
- adapter->aq_required |= IAVF_FLAG_AQ_REQUEST_PROMISC;
- else if (!(netdev->flags & IFF_PROMISC) &&
- adapter->flags & IAVF_FLAG_PROMISC_ON)
- adapter->aq_required |= IAVF_FLAG_AQ_RELEASE_PROMISC;
-
- if (netdev->flags & IFF_ALLMULTI &&
- !(adapter->flags & IAVF_FLAG_ALLMULTI_ON))
- adapter->aq_required |= IAVF_FLAG_AQ_REQUEST_ALLMULTI;
- else if (!(netdev->flags & IFF_ALLMULTI) &&
- adapter->flags & IAVF_FLAG_ALLMULTI_ON)
- adapter->aq_required |= IAVF_FLAG_AQ_RELEASE_ALLMULTI;
+ spin_lock_bh(&adapter->current_netdev_promisc_flags_lock);
+ if (iavf_promiscuous_mode_changed(adapter))
+ adapter->aq_required |= IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE;
+ spin_unlock_bh(&adapter->current_netdev_promisc_flags_lock);
}
/**
@@ -2163,19 +2164,8 @@ static int iavf_process_aq_command(struct iavf_adapter *adapter)
return 0;
}
- if (adapter->aq_required & IAVF_FLAG_AQ_REQUEST_PROMISC) {
- iavf_set_promiscuous(adapter, FLAG_VF_UNICAST_PROMISC |
- FLAG_VF_MULTICAST_PROMISC);
- return 0;
- }
-
- if (adapter->aq_required & IAVF_FLAG_AQ_REQUEST_ALLMULTI) {
- iavf_set_promiscuous(adapter, FLAG_VF_MULTICAST_PROMISC);
- return 0;
- }
- if ((adapter->aq_required & IAVF_FLAG_AQ_RELEASE_PROMISC) ||
- (adapter->aq_required & IAVF_FLAG_AQ_RELEASE_ALLMULTI)) {
- iavf_set_promiscuous(adapter, 0);
+ if (adapter->aq_required & IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE) {
+ iavf_set_promiscuous(adapter);
return 0;
}
@@ -4971,6 +4961,7 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
spin_lock_init(&adapter->cloud_filter_list_lock);
spin_lock_init(&adapter->fdir_fltr_lock);
spin_lock_init(&adapter->adv_rss_lock);
+ spin_lock_init(&adapter->current_netdev_promisc_flags_lock);
INIT_LIST_HEAD(&adapter->mac_filter_list);
INIT_LIST_HEAD(&adapter->vlan_filter_list);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index f9727e9c3d63..0b97b424e487 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -936,14 +936,14 @@ void iavf_del_vlans(struct iavf_adapter *adapter)
/**
* iavf_set_promiscuous
* @adapter: adapter structure
- * @flags: bitmask to control unicast/multicast promiscuous.
*
* Request that the PF enable promiscuous mode for our VSI.
**/
-void iavf_set_promiscuous(struct iavf_adapter *adapter, int flags)
+void iavf_set_promiscuous(struct iavf_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
struct virtchnl_promisc_info vpi;
- int promisc_all;
+ unsigned int flags;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
@@ -952,36 +952,57 @@ void iavf_set_promiscuous(struct iavf_adapter *adapter, int flags)
return;
}
- promisc_all = FLAG_VF_UNICAST_PROMISC |
- FLAG_VF_MULTICAST_PROMISC;
- if ((flags & promisc_all) == promisc_all) {
- adapter->flags |= IAVF_FLAG_PROMISC_ON;
- adapter->aq_required &= ~IAVF_FLAG_AQ_REQUEST_PROMISC;
- dev_info(&adapter->pdev->dev, "Entering promiscuous mode\n");
- }
+ /* prevent changes to promiscuous flags */
+ spin_lock_bh(&adapter->current_netdev_promisc_flags_lock);
- if (flags & FLAG_VF_MULTICAST_PROMISC) {
- adapter->flags |= IAVF_FLAG_ALLMULTI_ON;
- adapter->aq_required &= ~IAVF_FLAG_AQ_REQUEST_ALLMULTI;
- dev_info(&adapter->pdev->dev, "%s is entering multicast promiscuous mode\n",
- adapter->netdev->name);
+ /* sanity check to prevent duplicate AQ calls */
+ if (!iavf_promiscuous_mode_changed(adapter)) {
+ adapter->aq_required &= ~IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE;
+ dev_dbg(&adapter->pdev->dev, "No change in promiscuous mode\n");
+ /* allow changes to promiscuous flags */
+ spin_unlock_bh(&adapter->current_netdev_promisc_flags_lock);
+ return;
}
- if (!flags) {
- if (adapter->flags & IAVF_FLAG_PROMISC_ON) {
- adapter->flags &= ~IAVF_FLAG_PROMISC_ON;
- adapter->aq_required &= ~IAVF_FLAG_AQ_RELEASE_PROMISC;
- dev_info(&adapter->pdev->dev, "Leaving promiscuous mode\n");
- }
+ /* there are 2 bits, but only 3 states */
+ if (!(netdev->flags & IFF_PROMISC) &&
+ netdev->flags & IFF_ALLMULTI) {
+ /* State 1 - only multicast promiscuous mode enabled
+ * - !IFF_PROMISC && IFF_ALLMULTI
+ */
+ flags = FLAG_VF_MULTICAST_PROMISC;
+ adapter->current_netdev_promisc_flags |= IFF_ALLMULTI;
+ adapter->current_netdev_promisc_flags &= ~IFF_PROMISC;
+ dev_info(&adapter->pdev->dev, "Entering multicast promiscuous mode\n");
+ } else if (!(netdev->flags & IFF_PROMISC) &&
+ !(netdev->flags & IFF_ALLMULTI)) {
+ /* State 2 - unicast/multicast promiscuous mode disabled
+ * - !IFF_PROMISC && !IFF_ALLMULTI
+ */
+ flags = 0;
+ adapter->current_netdev_promisc_flags &=
+ ~(IFF_PROMISC | IFF_ALLMULTI);
+ dev_info(&adapter->pdev->dev, "Leaving promiscuous mode\n");
+ } else {
+ /* State 3 - unicast/multicast promiscuous mode enabled
+ * - IFF_PROMISC && IFF_ALLMULTI
+ * - IFF_PROMISC && !IFF_ALLMULTI
+ */
+ flags = FLAG_VF_UNICAST_PROMISC | FLAG_VF_MULTICAST_PROMISC;
+ adapter->current_netdev_promisc_flags |= IFF_PROMISC;
+ if (netdev->flags & IFF_ALLMULTI)
+ adapter->current_netdev_promisc_flags |= IFF_ALLMULTI;
+ else
+ adapter->current_netdev_promisc_flags &= ~IFF_ALLMULTI;
- if (adapter->flags & IAVF_FLAG_ALLMULTI_ON) {
- adapter->flags &= ~IAVF_FLAG_ALLMULTI_ON;
- adapter->aq_required &= ~IAVF_FLAG_AQ_RELEASE_ALLMULTI;
- dev_info(&adapter->pdev->dev, "%s is leaving multicast promiscuous mode\n",
- adapter->netdev->name);
- }
+ dev_info(&adapter->pdev->dev, "Entering promiscuous mode\n");
}
+ adapter->aq_required &= ~IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE;
+
+ /* allow changes to promiscuous flags */
+ spin_unlock_bh(&adapter->current_netdev_promisc_flags_lock);
+
adapter->current_op = VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
vpi.vsi_id = adapter->vsi_res->vsi_id;
vpi.flags = flags;
--
2.38.1
Powered by blists - more mailing lists