[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZQCWoIjvAJZ1Qyii@shell.armlinux.org.uk>
Date: Tue, 12 Sep 2023 17:49:36 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Pawel Dembicki <paweldembicki@...il.com>
Cc: netdev@...r.kernel.org, Dan Carpenter <dan.carpenter@...aro.org>,
Simon Horman <simon.horman@...igine.com>,
Linus Walleij <linus.walleij@...aro.org>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v3 2/8] net: dsa: vsc73xx: convert to PHYLINK
On Tue, Sep 12, 2023 at 02:21:56PM +0200, Pawel Dembicki wrote:
> +static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
> + unsigned int mode,
> + phy_interface_t interface,
> + struct phy_device *phydev,
> + int speed, int duplex,
> + bool tx_pause, bool rx_pause)
> +{
> + struct vsc73xx *vsc = ds->priv;
> + u32 val;
> +
> + if (speed == SPEED_1000)
> + val = VSC73XX_MAC_CFG_GIGA_MODE | VSC73XX_MAC_CFG_TX_IPG_1000M;
> + else
> + val = VSC73XX_MAC_CFG_TX_IPG_100_10M;
> +
> + if (interface == PHY_INTERFACE_MODE_RGMII)
> + val |= VSC73XX_MAC_CFG_CLK_SEL_1000M;
> + else
> + val |= VSC73XX_MAC_CFG_CLK_SEL_EXT;
I know the original code tested against PHY_INTERFACE_MODE_RGMII, but
is this correct, or should it be:
if (phy_interface_is_rgmii(interface))
since the various RGMII* modes are used to determine the delay on the
PHY side.
Even so, I don't think that is a matter for this patch, but a future
(or maybe a preceeding patch) to address.
Other than that, I think it looks okay.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists