[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230912-capable-stash-c7a3e33078ac@spud>
Date: Tue, 12 Sep 2023 18:21:58 +0100
From: Conor Dooley <conor@...nel.org>
To: Herve Codina <herve.codina@...tlin.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Andrew Lunn <andrew@...n.ch>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Lee Jones <lee@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Qiang Zhao <qiang.zhao@....com>, Li Yang <leoyang.li@....com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Shengjiu Wang <shengjiu.wang@...il.com>,
Xiubo Li <Xiubo.Lee@...il.com>, Fabio Estevam <festevam@...il.com>,
Nicolin Chen <nicoleotsuka@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
Randy Dunlap <rdunlap@...radead.org>, netdev@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, alsa-devel@...a-project.org,
Simon Horman <horms@...nel.org>,
Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v5 08/31] dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc:
Add support for QMC HDLC
On Tue, Sep 12, 2023 at 12:10:18PM +0200, Herve Codina wrote:
> The QMC (QUICC mutichannel controller) is a controller present in some
> PowerQUICC SoC such as MPC885.
> The QMC HDLC uses the QMC controller to transfer HDLC data.
>
> Additionally, a framer can be connected to the QMC HDLC.
> If present, this framer is the interface between the TDM bus used by the
> QMC HDLC and the E1/T1 line.
> The QMC HDLC can use this framer to get information about the E1/T1 line
> and configure the E1/T1 line.
>
> Signed-off-by: Herve Codina <herve.codina@...tlin.com>
> ---
> .../bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> index 82d9beb48e00..b5073531f3f1 100644
> --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
> @@ -101,6 +101,16 @@ patternProperties:
> Channel assigned Rx time-slots within the Rx time-slots routed by the
> TSA to this cell.
>
> + compatible:
> + const: fsl,qmc-hdlc
> +
> + fsl,framer:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + phandle to the framer node. The framer is in charge of an E1/T1 line
> + interface connected to the TDM bus. It can be used to get the E1/T1 line
> + status such as link up/down.
Sounds like this fsl,framer property should depend on the compatible
being present, no?
Thanks,
Conor.
> +
> required:
> - reg
> - fsl,tx-ts-mask
> @@ -159,5 +169,8 @@ examples:
> fsl,operational-mode = "hdlc";
> fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
> fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
> +
> + compatible = "fsl,qmc-hdlc";
> + fsl,framer = <&framer>;
> };
> };
> --
> 2.41.0
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists