netdev - Re: [PATCH net v4] team: fix null-ptr-deref when team device type is changed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ZQGXVQZ/koVlo4jj@nanopsycho>
Date: Wed, 13 Sep 2023 13:04:53 +0200
From: Jiri Pirko <jiri@...nulli.us>
To: Paolo Abeni <pabeni@...hat.com>
Cc: "Ziyang Xuan (William)" <william.xuanziyang@...wei.com>,
	davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
	netdev@...r.kernel.org, leon@...nel.org, ye.xingchen@....com.cn,
	liuhangbin@...il.com
Subject: Re: [PATCH net v4] team: fix null-ptr-deref when team device type is
 changed

Wed, Sep 13, 2023 at 08:28:13AM CEST, pabeni@...hat.com wrote:
>On Wed, 2023-09-13 at 14:15 +0800, Ziyang Xuan (William) wrote:
>> > > diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
>> > > index d3dc22509ea5..12fb5f4cff06 100644
>> > > --- a/drivers/net/team/team.c
>> > > +++ b/drivers/net/team/team.c
>> > > @@ -2127,7 +2127,10 @@ static const struct ethtool_ops
>> > > team_ethtool_ops = {
>> > >  static void team_setup_by_port(struct net_device *dev,
>> > >  			       struct net_device *port_dev)
>> > >  {
>> > > -	dev->header_ops	= port_dev->header_ops;
>> > > +	if (port_dev->type == ARPHRD_ETHER)
>> > > +		dev->header_ops	= &eth_header_ops;
>> > > +	else
>> > > +		dev->header_ops	= port_dev->header_ops;
>> > >  	dev->type = port_dev->type;
>> > >  	dev->hard_header_len = port_dev->hard_header_len;
>> > >  	dev->needed_headroom = port_dev->needed_headroom;
>> > 
>> > If I read correctly, for !vlan_hw_offload_capable() lower dev,
>> > egress
>> > packets going trough the team device will not contain the vlan tag.
>> > 
>> > Additionally, why is vlan special? Why others lower devices with
>> > custom
>> > header_ops do not need any care? 
>> 
>> We have also got ipvlan device problem as following:
>> 
>> BUG: KASAN: slab-out-of-bounds in ipvlan_hard_header+0xd1/0xe0
>> Read of size 8 at addr ffff888018ee1de8 by task syz-executor.1/3469
>> ...
>> Call Trace:
>>  <IRQ>
>>  dump_stack+0xbe/0xfd
>>  print_address_description.constprop.0+0x19/0x170
>>  ? ipvlan_hard_header+0xd1/0xe0
>>  __kasan_report.cold+0x6c/0x84
>>  ? ipvlan_hard_header+0xd1/0xe0
>>  kasan_report+0x3a/0x50
>>  ipvlan_hard_header+0xd1/0xe0
>>  ? ipvlan_get_iflink+0x40/0x40
>>  neigh_resolve_output+0x28f/0x410
>>  ip6_finish_output2+0x762/0xef0
>>  ? ip6_frag_init+0xf0/0xf0
>>  ? nf_nat_icmpv6_reply_translation+0x460/0x460
>>  ? do_add_counters+0x370/0x370
>>  ? do_add_counters+0x370/0x370
>>  ? ipv6_confirm+0x1ee/0x360
>>  ? nf_ct_bridge_unregister+0x50/0x50
>>  __ip6_finish_output.part.0+0x1a8/0x400
>>  ip6_finish_output+0x1a9/0x1e0
>>  ip6_output+0x146/0x2b0
>>  ? ip6_finish_output+0x1e0/0x1e0
>>  ? __ip6_finish_output+0xb0/0xb0
>>  ? __sanitizer_cov_trace_switch+0x50/0x90
>>  ? nf_hook_slow+0xa3/0x150
>>  mld_sendpack+0x3d9/0x670
>>  ? mca_alloc+0x210/0x210
>>  ? add_grhead+0xf5/0x140
>>  ? ipv6_icmp_sysctl_init+0xd0/0xd0
>>  ? add_grec+0x4e1/0xa90
>>  ? _raw_spin_lock_bh+0x85/0xe0
>>  ? _raw_read_unlock_irqrestore+0x30/0x30
>>  mld_send_cr+0x426/0x630
>>  ? migrate_swap_stop+0x400/0x400
>>  mld_ifc_timer_expire+0x22/0x240
>>  ? ipv6_mc_netdev_event+0x80/0x80
>>  call_timer_fn+0x3d/0x230
>>  ? ipv6_mc_netdev_event+0x80/0x80
>>  expire_timers+0x190/0x270
>>  run_timer_softirq+0x22c/0x560
>> 
>> ipvlan problem is slightly different from vlan.
>> 
>> // add ipvlan to team device
>> team_port_add
>>   team_dev_type_check_change
>>     team_setup_by_port // assign ipvlan_header_ops to team_dev-
>> >header_ops	
>>   netdev_rx_handler_register // fail out without restore team_dev-
>> >header_ops
>> 
>> // add other ether type device to team device
>> team_port_add
>>   team_dev_type_check_change // return directly because port_dev-
>> >type and team_dev->type are same
>> 
>> team_dev->head_ops has be assigned to ipvlan_header_ops. That will
>> trigger excption.
>
>To me both cases look the same in the end: the team driver sets and use
>header_ops of a different device that will assume dev_priv() being a
>different struct.
>
>I'm guessing a generic solution could be implementing 'trampoline'
>header_ops that just call into the lower port corresponding op, and
>assigning such ops to the team device every time the lower has non
>ethernet header_ops.
>
>team_dev_type_check_change() should then probably check both dev->type
>and dev->header_ops.
>
>> > Exporting 'eth_header_ops' for team's sake only looks a bit too
>> > much to
>> > me. I think could instead cache the header_ops ptr after the
>> > initial
>> > ether_setup().
>> 
>> Is it possible to use ether_setup() like bonding driver andmodify MTU
>> individually later?
>
>That could be another option to get the eth_header_ops.
>
>Note that in the end both are quite similar, you will have to cache
>some info (the mtu with the latter); ether_setup() possibly will have
>more side effects, as it touches many fields. I personally would use
>the thing I suggested above.

Agreed. That is why ether_setup() was not used in the first place.


>
>Cheers,
>
>Paolo
>