netdev - Re: [PATCH net-next v7 01/13] net:ethernet:realtek:rtase: Add pci table supported in this module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b655f427-0c45-4df6-be7f-6adf743ea0d4@lunn.ch>
Date: Wed, 13 Sep 2023 23:32:14 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Justin Lai <justinlai0215@...ltek.com>
Cc: kuba@...nel.org, davem@...emloft.net, edumazet@...gle.com,
	pabeni@...hat.com, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org
Subject: Re: [PATCH net-next v7 01/13] net:ethernet:realtek:rtase: Add pci
 table supported in this module

> +/* the table of time unit
> + * 4b'0000: 1.024us,    4b'0001: 2.048us,    4b'0010: 4.096us,
> + * 4b'0011: 8.192us,    4b'0100: 16.384us,   4b'0101: 32.768us,
> + * 4b'0110: 65.536us,   4b'0111: 131.072us,  4b'1000: 252.144us,
> + * 4b'1001: 524.288us,  4b'1010: 1048.576us, 4b'1011: 2097.152us,
> + * 4b'1100: 4194.304us, 4b'1101: 8388.608us, 4b'1110: 16777.216us,
> + * 4b'1111: 33554.432us

This seems to be all comment. Where is the table?

> + *
> + * the table of packet number unit
> + * 2b'00: 1,
> + * 2b'01: 2,
> + * 2b'10: 4,
> + * 2b'11: 16

Again, what use is this?

> + *
> + * interrupt mitigation = count * unit
> + * example: If want to set packet number mitigation be 64
> + *          the number unit is set 3,
> + *          and the number count is set 4
> + *          If want to set time be 131.072us
> + *          the time unit is set 4,
> + *          and the time count is set 8
> + */

Rather than a comment, how about a little function which does the
calculation. Code can be just as good at explaining something as
English text.

> +	if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)))
> +		dev->features |= NETIF_F_HIGHDMA;
> +	else if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
> +		goto err_out_free_res;
> +	else
> +		pr_info("DMA_BIT_MASK: 32\n");

dev_info(). Don't use pr_ functions if you have a struct device.

> +static int rtase_init_one(struct pci_dev *pdev,
> +			  const struct pci_device_id *ent)
> +{
> +	struct net_device *dev = NULL;
> +	void __iomem *ioaddr = NULL;
> +	struct rtase_private *tp;
> +	int ret;
> +
> +	if (!pdev->is_physfn && pdev->is_virtfn) {
> +		pr_info("This module does not support a virtual function.");
> +		return -EINVAL;
> +	}
> +
> +	pr_info("Automotive Switch Ethernet driver loaded\n");

dev_dbg(), or nothing at all.

> +
> +	ret = rtase_init_board(pdev, &dev, &ioaddr);
> +	if (ret != 0)
> +		return ret;
> +
> +	tp = netdev_priv(dev);
> +	tp->mmio_addr = ioaddr;
> +	tp->dev = dev;
> +	tp->pdev = pdev;
> +
> +	/* identify chip attached to board */
> +	if (!rtase_check_mac_version_valid(tp)) {
> +		return dev_err_probe(&pdev->dev, -ENODEV,
> +				     "unknown chip version, contact rtase maintainers (see MAINTAINERS file)\n");
> +	}
> +
> +	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
> +	if (!dev->tstats)
> +		goto err_out_1;
> +
> +	rtase_init_software_variable(tp);
> +	rtase_init_hardware(tp);
> +
> +	ret = rtase_alloc_interrupt(pdev, tp);
> +	if (ret < 0) {
> +		pr_err("unable to alloc MSIX/MSI\n");
> +		goto err_out_1;
> +	}
> +
> +	rtase_init_netdev_ops(dev);
> +
> +	dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
> +
> +	dev->features |= NETIF_F_IP_CSUM;
> +	dev->features |= NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
> +	dev->features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
> +	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
> +			   NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX |
> +			   NETIF_F_HW_VLAN_CTAG_RX;
> +	dev->hw_features |= NETIF_F_RXALL;
> +	dev->hw_features |= NETIF_F_RXFCS;
> +	dev->hw_features |= NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
> +	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
> +			     NETIF_F_HIGHDMA;
> +	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> +	netif_set_tso_max_size(dev, LSO_64K);
> +	netif_set_tso_max_segs(dev, NIC_MAX_PHYS_BUF_COUNT_LSO2);
> +
> +	rtase_get_mac_address(dev);
> +
> +	tp->tally_vaddr = dma_alloc_coherent(&pdev->dev,
> +					     sizeof(*tp->tally_vaddr),
> +					     &tp->tally_paddr,
> +					     GFP_KERNEL);
> +	if (!tp->tally_vaddr) {
> +		ret = -ENOMEM;
> +		goto err_out;
> +	}
> +
> +	rtase_tally_counter_clear(tp);
> +
> +	pci_set_drvdata(pdev, dev);
> +
> +	ret = register_netdev(dev);
> +	if (ret != 0)
> +		goto err_out;
> +
> +	netdev_info(dev, "%pM, IRQ %d\n", dev->dev_addr, dev->irq);

netdev_dbg(), or nothing at all.

	Andrew