netdev - [PATCH net 4/4] i40e: Fix VF VLAN offloading when port VLAN is configured

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date: Fri, 15 Sep 2023 10:11:39 -0700
From: Tony Nguyen <anthony.l.nguyen@...el.com>
To: davem@...emloft.net,
	kuba@...nel.org,
	pabeni@...hat.com,
	edumazet@...gle.com,
	netdev@...r.kernel.org
Cc: Ivan Vecera <ivecera@...hat.com>,
	anthony.l.nguyen@...el.com,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Rafal Romanowski <rafal.romanowski@...el.com>
Subject: [PATCH net 4/4] i40e: Fix VF VLAN offloading when port VLAN is configured

From: Ivan Vecera <ivecera@...hat.com>

If port VLAN is configured on a VF then any other VLANs on top of this VF
are broken.

During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
but this reset occurs too early, prior setting of vf->info.pvid field
and because this field can be zero during i40e_vc_get_vf_resources_msg()
then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.

This is wrong because iavf driver should not report VLAN offloading
capability when port VLAN is configured as i40e does not support QinQ
offloading.

Fix the issue by moving VF reset after setting of vf->port_vlan_id
field.

Without this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: on
tx-vlan-offload: on
$ dmesg -l err | grep iavf
[1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID

With this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: off [requested on]
tx-vlan-offload: off [requested on]
$ dmesg -l err | grep iavf

Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration")
Signed-off-by: Ivan Vecera <ivecera@...hat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@...el.com>
Tested-by: Rafal Romanowski <rafal.romanowski@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 8ea1a238dcef..d3d6415553ed 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4475,9 +4475,7 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
 		goto error_pvid;

 	i40e_vlan_stripping_enable(vsi);
-	i40e_vc_reset_vf(vf, true);
-	/* During reset the VF got a new VSI, so refresh a pointer. */
-	vsi = pf->vsi[vf->lan_vsi_idx];
+
 	/* Locked once because multiple functions below iterate list */
 	spin_lock_bh(&vsi->mac_filter_hash_lock);

@@ -4563,6 +4561,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
 	 */
 	vf->port_vlan_id = le16_to_cpu(vsi->info.pvid);

+	i40e_vc_reset_vf(vf, true);
+	/* During reset the VF got a new VSI, so refresh a pointer. */
+	vsi = pf->vsi[vf->lan_vsi_idx];
+
 	ret = i40e_config_vf_promiscuous_mode(vf, vsi->id, allmulti, alluni);
 	if (ret) {
 		dev_err(&pf->pdev->dev, "Unable to config vf promiscuous mode\n");
-- 
2.38.1