[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230920172609.11929-3-asmaa@nvidia.com>
Date: Wed, 20 Sep 2023 13:26:08 -0400
From: Asmaa Mnebhi <asmaa@...dia.com>
To: <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, <olteanv@...il.com>
CC: Asmaa Mnebhi <asmaa@...dia.com>, <netdev@...r.kernel.org>,
<davthompson@...dia.com>
Subject: [PATCH v2 2/3] mlxbf_gige: Fix intermittent no ip issue
Although the link is up, there is no ip assigned on a setup with high background
traffic. Nothing is transmitted nor received.
The RX error count keeps on increasing. After several minutes, the RX error count
stagnates and the GigE interface finally gets an ip.
The issue is in the mlxbf_gige_rx_init function. As soon as the RX DMA is enabled,
the RX CI reaches the max of 128, and it becomes equal to RX PI. RX CI doesn't decrease
since the code hasn't ran phy_start yet.
The solution is to move the rx init after phy_start.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: Asmaa Mnebhi <asmaa@...dia.com>
Reviewed-by: David Thompson <davthompson@...dia.com>
---
v1->v2:
- No changes
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c | 14 +++++++-------
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c | 6 +++---
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
index 98f75c97b500..f233c2c7b6c1 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
@@ -147,14 +147,14 @@ static int mlxbf_gige_open(struct net_device *netdev)
*/
priv->valid_polarity = 0;
- err = mlxbf_gige_rx_init(priv);
+ phy_start(phydev);
+
+ err = mlxbf_gige_tx_init(priv);
if (err)
goto free_irqs;
- err = mlxbf_gige_tx_init(priv);
+ err = mlxbf_gige_rx_init(priv);
if (err)
- goto rx_deinit;
-
- phy_start(phydev);
+ goto tx_deinit;
netif_napi_add(netdev, &priv->napi, mlxbf_gige_poll);
napi_enable(&priv->napi);
@@ -176,8 +176,8 @@ static int mlxbf_gige_open(struct net_device *netdev)
return 0;
-rx_deinit:
- mlxbf_gige_rx_deinit(priv);
+tx_deinit:
+ mlxbf_gige_tx_deinit(priv);
free_irqs:
mlxbf_gige_free_irqs(priv);
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c
index cfb8fb957f0c..d82feeabb061 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_rx.c
@@ -142,6 +142,9 @@ int mlxbf_gige_rx_init(struct mlxbf_gige *priv)
writeq(MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS_EN,
priv->base + MLXBF_GIGE_RX_MAC_FILTER_COUNT_PASS);
+ writeq(ilog2(priv->rx_q_entries),
+ priv->base + MLXBF_GIGE_RX_WQE_SIZE_LOG2);
+
/* Clear MLXBF_GIGE_INT_MASK 'receive pkt' bit to
* indicate readiness to receive interrupts
*/
@@ -154,9 +157,6 @@ int mlxbf_gige_rx_init(struct mlxbf_gige *priv)
data |= MLXBF_GIGE_RX_DMA_EN;
writeq(data, priv->base + MLXBF_GIGE_RX_DMA);
- writeq(ilog2(priv->rx_q_entries),
- priv->base + MLXBF_GIGE_RX_WQE_SIZE_LOG2);
-
return 0;
free_wqe_and_skb:
--
2.30.1
Powered by blists - more mailing lists