[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230928151512.322016-1-christophe.roullier@foss.st.com>
Date: Thu, 28 Sep 2023 17:15:00 +0200
From: Christophe Roullier <christophe.roullier@...s.st.com>
To: "David S . Miller" <davem@...emloft.net>,
Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni
<pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Richard Cochran <richardcochran@...il.com>,
Jose Abreu <joabreu@...opsys.com>, Liam Girdwood <lgirdwood@...il.com>,
Mark
Brown <broonie@...nel.org>,
Christophe Roullier
<christophe.roullier@...s.st.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v3 00/12] Series to deliver Ethernets for STM32MP13
STM32MP13 is STM32 SOC with 2 GMACs instances
This board have 2 RMII phy:
-Ethernet1: RMII with crystal
-Ethernet2: RMII without crystal
Rework dwmac glue to simplify management for next stm32
-V2: Update from remark of Andrew Lunn (split commit into a number of smaller patches)
Update from Conor Dooley (yaml documentation)
-V3: bad indentation for yaml (sorry)
Christophe Roullier (12):
dt-bindings: net: add STM32MP13 compatible in documentation for stm32
dt-bindings: net: add new property st,ext-phyclk in documentation for
stm32
dt-bindings: net: add phy-supply property for stm32
net: ethernet: stmmac: rework glue to simplify management for next
stm32
net: ethernet: stmmac: add management of stm32mp13 for stm32
net: ethernet: stmmac: stm32: update config management for phy wo
cristal
net: ethernet: stm32: clean the way to manage wol irqwake
net: ethernet: stmmac: stm32: support the phy-supply regulator binding
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board
ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support
.../devicetree/bindings/net/stm32-dwmac.yaml | 90 ++++++-
arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 ++++++
arch/arm/boot/dts/st/stm32mp131.dtsi | 31 +++
arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 48 ++++
arch/arm/configs/multi_v7_defconfig | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 229 +++++++++++++-----
7 files changed, 425 insertions(+), 75 deletions(-)
--
2.25.1
Powered by blists - more mailing lists