| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231005195812.549776-35-mkl@pengutronix.de>
Date: Thu, 5 Oct 2023 21:58:09 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net,
kuba@...nel.org,
linux-can@...r.kernel.org,
kernel@...gutronix.de,
Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH net-next 34/37] can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off()
The driver implements a hand crafted CAN state handling. Update the
driver to make use of can_change_state(), introduced in ("can: dev:
Consolidate and unify state change handling")
Also switch from hand crafted CAN bus off handling to can_bus_off():
In case of a bus off, abort all pending TX requests, switch off the
device and let can_bus_off() handle the device restart.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-24-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/at91_can.c | 131 ++++++-------------------------------
1 file changed, 21 insertions(+), 110 deletions(-)
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index fbe58a1a1989..a413589109b2 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -443,7 +443,7 @@ static void at91_chip_start(struct net_device *dev)
at91_read(priv, AT91_SR);
/* Enable interrupts */
- reg_ier = get_irq_mb_rx(priv) | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME;
+ reg_ier = get_irq_mb_rx(priv) | AT91_IRQ_ERR_LINE | AT91_IRQ_ERR_FRAME;
at91_write(priv, AT91_IER, reg_ier);
}
@@ -452,6 +452,11 @@ static void at91_chip_stop(struct net_device *dev, enum can_state state)
struct at91_priv *priv = netdev_priv(dev);
u32 reg_mr;
+ /* Abort any pending TX requests. However this doesn't seem to
+ * work in case of bus-off on sama5d3.
+ */
+ at91_write(priv, AT91_ACR, get_irq_mb_tx(priv));
+
/* disable interrupts */
at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
@@ -832,111 +837,6 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
netif_wake_queue(dev);
}
-static void at91_irq_err_state(struct net_device *dev,
- struct can_frame *cf, enum can_state new_state)
-{
- struct at91_priv *priv = netdev_priv(dev);
- u32 reg_idr = 0, reg_ier = 0;
- struct can_berr_counter bec;
-
- at91_get_berr_counter(dev, &bec);
-
- switch (priv->can.state) {
- case CAN_STATE_ERROR_ACTIVE:
- /* from: ERROR_ACTIVE
- * to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
- * => : there was a warning int
- */
- if (new_state >= CAN_STATE_ERROR_WARNING &&
- new_state <= CAN_STATE_BUS_OFF) {
- netdev_dbg(dev, "Error Warning IRQ\n");
- priv->can.can_stats.error_warning++;
-
- cf->can_id |= CAN_ERR_CRTL;
- cf->data[1] = (bec.txerr > bec.rxerr) ?
- CAN_ERR_CRTL_TX_WARNING :
- CAN_ERR_CRTL_RX_WARNING;
- }
- fallthrough;
- case CAN_STATE_ERROR_WARNING:
- /* from: ERROR_ACTIVE, ERROR_WARNING
- * to : ERROR_PASSIVE, BUS_OFF
- * => : error passive int
- */
- if (new_state >= CAN_STATE_ERROR_PASSIVE &&
- new_state <= CAN_STATE_BUS_OFF) {
- netdev_dbg(dev, "Error Passive IRQ\n");
- priv->can.can_stats.error_passive++;
-
- cf->can_id |= CAN_ERR_CRTL;
- cf->data[1] = (bec.txerr > bec.rxerr) ?
- CAN_ERR_CRTL_TX_PASSIVE :
- CAN_ERR_CRTL_RX_PASSIVE;
- }
- break;
- case CAN_STATE_BUS_OFF:
- /* from: BUS_OFF
- * to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE
- */
- if (new_state <= CAN_STATE_ERROR_PASSIVE) {
- cf->can_id |= CAN_ERR_RESTARTED;
-
- netdev_dbg(dev, "restarted\n");
- priv->can.can_stats.restarts++;
-
- netif_carrier_on(dev);
- netif_wake_queue(dev);
- }
- break;
- default:
- break;
- }
-
- /* process state changes depending on the new state */
- switch (new_state) {
- case CAN_STATE_ERROR_ACTIVE:
- /* actually we want to enable AT91_IRQ_WARN here, but
- * it screws up the system under certain
- * circumstances. so just enable AT91_IRQ_ERRP, thus
- * the "fallthrough"
- */
- netdev_dbg(dev, "Error Active\n");
- cf->can_id |= CAN_ERR_PROT;
- cf->data[2] = CAN_ERR_PROT_ACTIVE;
- fallthrough;
- case CAN_STATE_ERROR_WARNING:
- reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF;
- reg_ier = AT91_IRQ_ERRP;
- break;
- case CAN_STATE_ERROR_PASSIVE:
- reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP;
- reg_ier = AT91_IRQ_BOFF;
- break;
- case CAN_STATE_BUS_OFF:
- reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP |
- AT91_IRQ_WARN | AT91_IRQ_BOFF;
- reg_ier = 0;
-
- cf->can_id |= CAN_ERR_BUSOFF;
-
- netdev_dbg(dev, "bus-off\n");
- netif_carrier_off(dev);
- priv->can.can_stats.bus_off++;
-
- /* turn off chip, if restart is disabled */
- if (!priv->can.restart_ms) {
- at91_chip_stop(dev, CAN_STATE_BUS_OFF);
- return;
- }
- break;
- default:
- break;
- }
-
- at91_write(priv, AT91_IDR, reg_idr);
- at91_write(priv, AT91_IER, reg_ier);
-}
-
static void at91_irq_err_line(struct net_device *dev, const u32 reg_sr)
{
enum can_state new_state, rx_state, tx_state;
@@ -970,15 +870,22 @@ static void at91_irq_err_line(struct net_device *dev, const u32 reg_sr)
if (likely(new_state == priv->can.state))
return;
+ /* The skb allocation might fail, but can_change_state()
+ * handles cf == NULL.
+ */
skb = alloc_can_err_skb(dev, &cf);
+ can_change_state(dev, cf, tx_state, rx_state);
+
+ if (new_state == CAN_STATE_BUS_OFF) {
+ at91_chip_stop(dev, CAN_STATE_BUS_OFF);
+ can_bus_off(dev);
+ }
+
if (unlikely(!skb))
return;
- at91_irq_err_state(dev, cf, new_state);
netif_rx(skb);
-
- priv->can.state = new_state;
}
static void at91_irq_err_frame(struct net_device *dev, const u32 reg_sr)
@@ -1072,7 +979,11 @@ static irqreturn_t at91_irq(int irq, void *dev_id)
if (reg_sr & get_irq_mb_tx(priv))
at91_irq_tx(dev, reg_sr);
- at91_irq_err_line(dev, reg_sr);
+ /* Line Error interrupt */
+ if (reg_sr & AT91_IRQ_ERR_LINE ||
+ priv->can.state > CAN_STATE_ERROR_ACTIVE) {
+ at91_irq_err_line(dev, reg_sr);
+ }
/* Frame Error Interrupt */
if (reg_sr & AT91_IRQ_ERR_FRAME)
--
2.40.1
Powered by blists - more mailing lists