[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f6eb4bfc-e8f5-491b-8b3b-4cb9eed79483@kernel.org>
Date: Fri, 6 Oct 2023 15:28:11 +0300
From: Roger Quadros <rogerq@...nel.org>
To: Simon Horman <horms@...nel.org>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, vladimir.oltean@....com, s-vadapalli@...com, srk@...com,
vigneshr@...com, p-varis@...com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 net-next 2/4] net: ethernet: ti: am65-cpsw: add mqprio
qdisc offload in channel mode
On 01/10/2023 09:55, Simon Horman wrote:
> On Wed, Sep 27, 2023 at 10:27:39AM +0300, Roger Quadros wrote:
>
> ...
>
>> +static int am65_cpsw_setup_mqprio(struct net_device *ndev, void *type_data)
>> +{
>> + struct am65_cpsw_port *port = am65_ndev_to_port(ndev);
>> + struct am65_cpsw_mqprio *p_mqprio = &port->qos.mqprio;
>> + struct tc_mqprio_qopt_offload *mqprio = type_data;
>> + struct am65_cpsw_common *common = port->common;
>> + struct tc_mqprio_qopt *qopt = &mqprio->qopt;
>> + int tc, offset, count, ret, prio;
>> + u8 num_tc = qopt->num_tc;
>> + u32 tx_prio_map = 0;
>> + int i;
>> +
>> + memcpy(&p_mqprio->mqprio_hw, mqprio, sizeof(*mqprio));
>> +
>> + ret = pm_runtime_get_sync(common->dev);
>> + if (ret < 0) {
>> + pm_runtime_put_noidle(common->dev);
>> + return ret;
>> + }
>> +
>> + if (!num_tc) {
>> + am65_cpsw_reset_tc_mqprio(ndev);
>> + goto exit_put;am65_cpsw_iet_commit_preemptible_tcs
>> + }
>> +
>> + ret = am65_cpsw_mqprio_verify_shaper(port, mqprio);
>> + if (ret)
>> + goto exit_put;
>> +
>> + netdev_set_num_tc(ndev, num_tc);
>> +
>> + /* Multiple Linux priorities can map to a Traffic Class
>> + * A Traffic Class can have multiple contiguous Queues,
>> + * Queues get mapped to Channels (thread_id),
>> + * if not VLAN tagged, thread_id is used as packet_priority
>> + * if VLAN tagged. VLAN priority is used as packet_priorit
>
> Hi,
>
> I don't think it is worth respinning just because of this, but
> there seems to be a 'y' missing from the end of the line above.
Now that there will be a re-spin. I'll fix this. Thanks!
>
>> + * packet_priority gets mapped to header_priority in p0_rx_pri_map,
>> + * header_priority gets mapped to switch_priority in pn_tx_pri_map.
>> + * As p0_rx_pri_map is left at defaults (0x76543210), we can
>> + * assume that Queue_n gets mapped to header_priority_n. We can then
>> + * set the switch priority in pn_tx_pri_map.
>> + */
>
> ...
--
cheers,
-roger
Powered by blists - more mailing lists