| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 09 Oct 2023 12:42:15 +0000
From: Benno Lossin <benno.lossin@...ton.me>
To: FUJITA Tomonori <fujita.tomonori@...il.com>, netdev@...r.kernel.org
Cc: rust-for-linux@...r.kernel.org, andrew@...n.ch, miguel.ojeda.sandonis@...il.com, greg@...ah.com, tmgross@...ch.edu
Subject: Re: [PATCH net-next v3 3/3] net: phy: add Rust Asix PHY driver
On 09.10.23 03:39, FUJITA Tomonori wrote:
> This is the Rust implementation of drivers/net/phy/ax88796b.c. The
> features are equivalent. You can choose C or Rust versionon kernel
> configuration.
>
> Signed-off-by: FUJITA Tomonori <fujita.tomonori@...il.com>
> ---
One small nit below, you can decide what to do with that.
Reviewed-by: Benno Lossin <benno.lossin@...ton.me>
> drivers/net/phy/Kconfig | 7 ++
> drivers/net/phy/Makefile | 6 +-
> drivers/net/phy/ax88796b_rust.rs | 129 +++++++++++++++++++++++++++++++
> rust/uapi/uapi_helper.h | 2 +
> 4 files changed, 143 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/phy/ax88796b_rust.rs
>
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 421d2b62918f..0317be180ac2 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -107,6 +107,13 @@ config AX88796B_PHY
> Currently supports the Asix Electronics PHY found in the X-Surf 100
> AX88796B package.
>
> +config AX88796B_RUST_PHY
> + bool "Rust version driver for Asix PHYs"
> + depends on RUST_PHYLIB_BINDINGS && AX88796B_PHY
> + help
> + Uses the Rust version driver for Asix PHYs (ax88796b_rust.ko)
> + instead of the C version.
> +
> config BROADCOM_PHY
> tristate "Broadcom 54XX PHYs"
> select BCM_NET_PHYLIB
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index c945ed9bd14b..58d7dfb095ab 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -41,7 +41,11 @@ aquantia-objs += aquantia_hwmon.o
> endif
> obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
> obj-$(CONFIG_AT803X_PHY) += at803x.o
> -obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
> +ifdef CONFIG_AX88796B_RUST_PHY
> + obj-$(CONFIG_AX88796B_PHY) += ax88796b_rust.o
> +else
> + obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
> +endif
> obj-$(CONFIG_BCM54140_PHY) += bcm54140.o
> obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
> obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
> diff --git a/drivers/net/phy/ax88796b_rust.rs b/drivers/net/phy/ax88796b_rust.rs
> new file mode 100644
> index 000000000000..017f817f6f8d
> --- /dev/null
> +++ b/drivers/net/phy/ax88796b_rust.rs
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2023 FUJITA Tomonori <fujita.tomonori@...il.com>
> +
> +//! Rust Asix PHYs driver
> +//!
> +//! C version of this driver: [`drivers/net/phy/ax88796b.c`](./ax88796b.c)
> +use kernel::c_str;
> +use kernel::net::phy::{self, DeviceId, Driver};
> +use kernel::prelude::*;
> +use kernel::uapi;
> +
> +kernel::module_phy_driver! {
> + drivers: [PhyAX88772A, PhyAX88772C, PhyAX88796B],
> + device_table: [
> + DeviceId::new_with_driver::<PhyAX88772A>(),
> + DeviceId::new_with_driver::<PhyAX88772C>(),
> + DeviceId::new_with_driver::<PhyAX88796B>()
> + ],
> + name: "rust_asix_phy",
> + author: "FUJITA Tomonori <fujita.tomonori@...il.com>",
> + description: "Rust Asix PHYs driver",
> + license: "GPL",
> +}
> +
> +// Performs a software PHY reset using the standard
> +// BMCR_RESET bit and poll for the reset bit to be cleared.
> +// Toggle BMCR_RESET bit off to accommodate broken AX8796B PHY implementation
> +// such as used on the Individual Computers' X-Surf 100 Zorro card.
> +fn asix_soft_reset(dev: &mut phy::Device) -> Result {
> + dev.write(uapi::MII_BMCR as u16, 0)?;
> + dev.genphy_soft_reset()
> +}
> +
> +struct PhyAX88772A;
> +
> +#[vtable]
> +impl phy::Driver for PhyAX88772A {
> + const FLAGS: u32 = phy::flags::IS_INTERNAL;
> + const NAME: &'static CStr = c_str!("Asix Electronics AX88772A");
> + const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x003b1861);
> +
> + // AX88772A is not working properly with some old switches (NETGEAR EN 108TP):
> + // after autoneg is done and the link status is reported as active, the MII_LPA
> + // register is 0. This issue is not reproducible on AX88772C.
> + fn read_status(dev: &mut phy::Device) -> Result<u16> {
> + dev.genphy_update_link()?;
> + if !dev.get_link() {
> + return Ok(0);
> + }
> + // If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
> + // linkmode so use MII_BMCR as default values.
> + let ret = dev.read(uapi::MII_BMCR as u16)?;
> +
> + if ret as u32 & uapi::BMCR_SPEED100 != 0 {
> + dev.set_speed(uapi::SPEED_100);
> + } else {
> + dev.set_speed(uapi::SPEED_10);
> + }
Maybe refactor to only have one `dev.set_speed` call?
> +
> + let duplex = if ret as u32 & uapi::BMCR_FULLDPLX != 0 {
> + phy::DuplexMode::Full
> + } else {
> + phy::DuplexMode::Half
> + };
> + dev.set_duplex(duplex);
> +
> + dev.genphy_read_lpa()?;
> +
> + if dev.is_autoneg_enabled() && dev.is_autoneg_completed() {
> + dev.resolve_aneg_linkmode();
> + }
> +
> + Ok(0)
> + }
> +
> + fn suspend(dev: &mut phy::Device) -> Result {
> + dev.genphy_suspend()
> + }
> +
> + fn resume(dev: &mut phy::Device) -> Result {
> + dev.genphy_resume()
> + }
> +
> + fn soft_reset(dev: &mut phy::Device) -> Result {
> + asix_soft_reset(dev)
> + }
> +
> + fn link_change_notify(dev: &mut phy::Device) {
> + // Reset PHY, otherwise MII_LPA will provide outdated information.
> + // This issue is reproducible only with some link partner PHYs.
> + if dev.state() == phy::DeviceState::NoLink {
> + let _ = dev.init_hw();
> + let _ = dev.start_aneg();
> + }
> + }
> +}
> +
> +struct PhyAX88772C;
> +
> +#[vtable]
> +impl Driver for PhyAX88772C {
> + const FLAGS: u32 = phy::flags::IS_INTERNAL;
> + const NAME: &'static CStr = c_str!("Asix Electronics AX88772C");
> + const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x003b1881);
> +
> + fn suspend(dev: &mut phy::Device) -> Result {
> + dev.genphy_suspend()
> + }
> +
> + fn resume(dev: &mut phy::Device) -> Result {
> + dev.genphy_resume()
> + }
> +
> + fn soft_reset(dev: &mut phy::Device) -> Result {
> + asix_soft_reset(dev)
> + }
> +}
> +
> +struct PhyAX88796B;
> +
> +#[vtable]
> +impl Driver for PhyAX88796B {
> + const NAME: &'static CStr = c_str!("Asix Electronics AX88796B");
> + const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_model_mask(0x003b1841);
> +
> + fn soft_reset(dev: &mut phy::Device) -> Result {
> + asix_soft_reset(dev)
> + }
> +}
> diff --git a/rust/uapi/uapi_helper.h b/rust/uapi/uapi_helper.h
> index 301f5207f023..08f5e9334c9e 100644
> --- a/rust/uapi/uapi_helper.h
> +++ b/rust/uapi/uapi_helper.h
> @@ -7,3 +7,5 @@
> */
>
> #include <uapi/asm-generic/ioctl.h>
> +#include <uapi/linux/mii.h>
> +#include <uapi/linux/ethtool.h>
> --
> 2.34.1
>
>
Powered by blists - more mailing lists