netdev - Re: [PATCH 2/3] RFC: dt-bindings: marvell: Rewrite in schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACRpkdYocdsrsydHwe_FF--6g-Y_YwxHXF6GUTe3wRY0suSCCg@mail.gmail.com>
Date: Fri, 13 Oct 2023 15:04:10 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Andrew Lunn <andrew@...n.ch>
Cc: Gregory Clement <gregory.clement@...tlin.com>, 
	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>, Rob Herring <robh+dt@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	Russell King <linux@...linux.org.uk>, Florian Fainelli <f.fainelli@...il.com>, 
	Vladimir Oltean <olteanv@...il.com>, "David S. Miller" <davem@...emloft.net>, 
	Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
	Christian Marangi <ansuelsmth@...il.com>, linux-arm-kernel@...ts.infradead.org, 
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
	netdev@...r.kernel.org
Subject: Re: [PATCH 2/3] RFC: dt-bindings: marvell: Rewrite in schema

Hi Andrew,

thanks for reviewing!

On Fri, Oct 13, 2023 at 2:43 PM Andrew Lunn <andrew@...n.ch> wrote:

> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - marvell,mv88e6060
>
> The 6060 is a separate driver. Its not part of mv88e6xxx. So it should
> have a binding document of its own.

It really doesn't matter to the DT bindings.
It is not the job of DT to reflect the state of Linux.

In another operating system they might all be the same driver.
Or all four variants have their own driver.

If the hardware is distinctly different so a lot of the properties
are unique then it may be warranted with a separate DT
binding, for the sake of keeping bindings simpler and
coherent.

> > +  '#interrupt-cells':
> > +    description: The internal interrupt controller only supports triggering
> > +      on IRQ_TYPE_LEVEL_HIGH
> > +      # FIXME: what is this? this should be one cell should it not?
> > +      # the Linux mv88e6xxx driver does not implement .irq_set_type in its irq_chip
> > +      # so at least in that implementation the type is flat out ignored.
> > +    const: 2
>
> This interrupt controller is for the embedded PHYs. Its is hard wired
> active high.

Hmm.... I need feedback from the DT people here. It does have a
polarity, but the polarity cannot be changed. So shall we encode this
always the same polarity in the flags cell or skip it altogether?

I'm uncertain. The currens scheme does reflect a reality.

> > +  mdio1:
> > +    $ref: /schemas/net/mdio.yaml#
> > +    unevaluatedProperties: false
> > +    description: Older version of mdio-external
> > +    deprecated: true
> > +    properties:
> > +      compatible:
> > +        const: marvell,mv88e6xxx-mdio-external
>
> The driver only looks at the compatible. It does not care what the
> node is called. So you are going to need to change the driver if you
> want this in the schema.

Yeah, thats what patch 3/3 does :D

Yours,
Linus Walleij