| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231014171908.290428-16-saeed@kernel.org>
Date: Sat, 14 Oct 2023 10:19:08 -0700
From: Saeed Mahameed <saeed@...nel.org>
To: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Eric Dumazet <edumazet@...gle.com>
Cc: Saeed Mahameed <saeedm@...dia.com>,
netdev@...r.kernel.org,
Tariq Toukan <tariqt@...dia.com>,
Leon Romanovsky <leonro@...dia.com>,
Patrisious Haddad <phaddad@...dia.com>,
Jacob Keller <jacob.e.keller@...el.com>
Subject: [net-next V3 15/15] net/mlx5e: Allow IPsec soft/hard limits in bytes
From: Leon Romanovsky <leonro@...dia.com>
Actually the mlx5 code already has needed support to allow users
to configure soft/hard limits in bytes. It is possible due to the
situation with TX path, where CX7 devices are missing hardware
implementation to send events to the software, see commit b2f7b01d36a9
("net/mlx5e: Simulate missing IPsec TX limits hardware functionality").
That software workaround is not limited to TX and works for bytes too.
So relax the validation logic to not block soft/hard limits in bytes.
Reviewed-by: Patrisious Haddad <phaddad@...dia.com>
Signed-off-by: Leon Romanovsky <leonro@...dia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@...el.com>
Signed-off-by: Saeed Mahameed <saeedm@...dia.com>
---
.../mellanox/mlx5/core/en_accel/ipsec.c | 23 +++++++++++-------
.../mellanox/mlx5/core/en_accel/ipsec_fs.c | 24 +++++++++++--------
2 files changed, 28 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 62f9c19f1028..655496598c68 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -56,7 +56,7 @@ static struct mlx5e_ipsec_pol_entry *to_ipsec_pol_entry(struct xfrm_policy *x)
return (struct mlx5e_ipsec_pol_entry *)x->xdo.offload_handle;
}
-static void mlx5e_ipsec_handle_tx_limit(struct work_struct *_work)
+static void mlx5e_ipsec_handle_sw_limits(struct work_struct *_work)
{
struct mlx5e_ipsec_dwork *dwork =
container_of(_work, struct mlx5e_ipsec_dwork, dwork.work);
@@ -486,9 +486,15 @@ static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev,
return -EINVAL;
}
- if (x->lft.hard_byte_limit != XFRM_INF ||
- x->lft.soft_byte_limit != XFRM_INF) {
- NL_SET_ERR_MSG_MOD(extack, "Device doesn't support limits in bytes");
+ if (x->lft.soft_byte_limit >= x->lft.hard_byte_limit &&
+ x->lft.hard_byte_limit != XFRM_INF) {
+ /* XFRM stack doesn't prevent such configuration :(. */
+ NL_SET_ERR_MSG_MOD(extack, "Hard byte limit must be greater than soft one");
+ return -EINVAL;
+ }
+
+ if (!x->lft.soft_byte_limit || !x->lft.hard_byte_limit) {
+ NL_SET_ERR_MSG_MOD(extack, "Soft/hard byte limits can't be 0");
return -EINVAL;
}
@@ -624,11 +630,10 @@ static int mlx5e_ipsec_create_dwork(struct mlx5e_ipsec_sa_entry *sa_entry)
if (x->xso.type != XFRM_DEV_OFFLOAD_PACKET)
return 0;
- if (x->xso.dir != XFRM_DEV_OFFLOAD_OUT)
- return 0;
-
if (x->lft.soft_packet_limit == XFRM_INF &&
- x->lft.hard_packet_limit == XFRM_INF)
+ x->lft.hard_packet_limit == XFRM_INF &&
+ x->lft.soft_byte_limit == XFRM_INF &&
+ x->lft.hard_byte_limit == XFRM_INF)
return 0;
dwork = kzalloc(sizeof(*dwork), GFP_KERNEL);
@@ -636,7 +641,7 @@ static int mlx5e_ipsec_create_dwork(struct mlx5e_ipsec_sa_entry *sa_entry)
return -ENOMEM;
dwork->sa_entry = sa_entry;
- INIT_DELAYED_WORK(&dwork->dwork, mlx5e_ipsec_handle_tx_limit);
+ INIT_DELAYED_WORK(&dwork->dwork, mlx5e_ipsec_handle_sw_limits);
sa_entry->dwork = dwork;
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
index ef4dfc8442a9..f41c976dc33f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
@@ -1326,15 +1326,17 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry)
setup_fte_no_frags(spec);
setup_fte_upper_proto_match(spec, &attrs->upspec);
- if (rx != ipsec->rx_esw)
- err = setup_modify_header(ipsec, attrs->type,
- sa_entry->ipsec_obj_id | BIT(31),
- XFRM_DEV_OFFLOAD_IN, &flow_act);
- else
- err = mlx5_esw_ipsec_rx_setup_modify_header(sa_entry, &flow_act);
+ if (!attrs->drop) {
+ if (rx != ipsec->rx_esw)
+ err = setup_modify_header(ipsec, attrs->type,
+ sa_entry->ipsec_obj_id | BIT(31),
+ XFRM_DEV_OFFLOAD_IN, &flow_act);
+ else
+ err = mlx5_esw_ipsec_rx_setup_modify_header(sa_entry, &flow_act);
- if (err)
- goto err_mod_header;
+ if (err)
+ goto err_mod_header;
+ }
switch (attrs->type) {
case XFRM_DEV_OFFLOAD_PACKET:
@@ -1384,7 +1386,8 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry)
if (flow_act.pkt_reformat)
mlx5_packet_reformat_dealloc(mdev, flow_act.pkt_reformat);
err_pkt_reformat:
- mlx5_modify_header_dealloc(mdev, flow_act.modify_hdr);
+ if (flow_act.modify_hdr)
+ mlx5_modify_header_dealloc(mdev, flow_act.modify_hdr);
err_mod_header:
kvfree(spec);
err_alloc:
@@ -1882,7 +1885,8 @@ void mlx5e_accel_ipsec_fs_del_rule(struct mlx5e_ipsec_sa_entry *sa_entry)
return;
}
- mlx5_modify_header_dealloc(mdev, ipsec_rule->modify_hdr);
+ if (ipsec_rule->modify_hdr)
+ mlx5_modify_header_dealloc(mdev, ipsec_rule->modify_hdr);
mlx5_esw_ipsec_rx_id_mapping_remove(sa_entry);
rx_ft_put(sa_entry->ipsec, sa_entry->attrs.family, sa_entry->attrs.type);
}
--
2.41.0
Powered by blists - more mailing lists