Message-Id: <20231016134750.1381153-7-leitao@debian.org>
Date: Mon, 16 Oct 2023 06:47:44 -0700
From: Breno Leitao <leitao@...ian.org>
To: sdf@...gle.com,
	axboe@...nel.dk,
	asml.silence@...il.com,
	willemdebruijn.kernel@...il.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	martin.lau@...ux.dev,
	krisman@...e.de
Cc: bpf@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org,
	io-uring@...r.kernel.org,
	"Peter Zijlstra (Intel)" <peterz@...radead.org>,
	Stefan Metzmacher <metze@...ba.org>,
	Josh Triplett <josh@...htriplett.org>
Subject: [PATCH v7 06/11] tools headers: Grab copy of io_uring.h

This file will be used by mini_uring.h and allow tests to run without
the need of installing liburing to run the tests.

This is needed to run io_uring tests in BPF, such as
(tools/testing/selftests/bpf/prog_tests/sockopt.c).

Signed-off-by: Breno Leitao <leitao@...ian.org>
---
 tools/include/uapi/linux/io_uring.h | 757 ++++++++++++++++++++++++++++
 1 file changed, 757 insertions(+)
 create mode 100644 tools/include/uapi/linux/io_uring.h

diff --git a/tools/include/uapi/linux/io_uring.h b/tools/include/uapi/linux/io_uring.h
new file mode 100644
index 000000000000..f1c16f817742
--- /dev/null
+++ b/tools/include/uapi/linux/io_uring.h
@@ -0,0 +1,757 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */
+/*
+ * Header file for the io_uring interface.
+ *
+ * Copyright (C) 2019 Jens Axboe
+ * Copyright (C) 2019 Christoph Hellwig
+ */
+#ifndef LINUX_IO_URING_H
+#define LINUX_IO_URING_H
+
+#include <linux/fs.h>
+#include <linux/types.h>
+/*
+ * this file is shared with liburing and that has to autodetect
+ * if linux/time_types.h is available or not, it can
+ * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
+ * if linux/time_types.h is not available
+ */
+#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
+#include <linux/time_types.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * IO submission data structure (Submission Queue Entry)
+ */
+struct io_uring_sqe {
+	__u8	opcode;		/* type of operation for this sqe */
+	__u8	flags;		/* IOSQE_ flags */
+	__u16	ioprio;		/* ioprio for the request */
+	__s32	fd;		/* file descriptor to do IO on */
+	union {
+		__u64	off;	/* offset into file */
+		__u64	addr2;
+		struct {
+			__u32	cmd_op;
+			__u32	__pad1;
+		};
+	};
+	union {
+		__u64	addr;	/* pointer to buffer or iovecs */
+		__u64	splice_off_in;
+		struct {
+			__u32	level;
+			__u32	optname;
+		};
+	};
+	__u32	len;		/* buffer size or number of iovecs */
+	union {
+		__kernel_rwf_t	rw_flags;
+		__u32		fsync_flags;
+		__u16		poll_events;	/* compatibility */
+		__u32		poll32_events;	/* word-reversed for BE */
+		__u32		sync_range_flags;
+		__u32		msg_flags;
+		__u32		timeout_flags;
+		__u32		accept_flags;
+		__u32		cancel_flags;
+		__u32		open_flags;
+		__u32		statx_flags;
+		__u32		fadvise_advice;
+		__u32		splice_flags;
+		__u32		rename_flags;
+		__u32		unlink_flags;
+		__u32		hardlink_flags;
+		__u32		xattr_flags;
+		__u32		msg_ring_flags;
+		__u32		uring_cmd_flags;
+		__u32		waitid_flags;
+		__u32		futex_flags;
+	};
+	__u64	user_data;	/* data to be passed back at completion time */
+	/* pack this to avoid bogus arm OABI complaints */
+	union {
+		/* index into fixed buffers, if used */
+		__u16	buf_index;
+		/* for grouped buffer selection */
+		__u16	buf_group;
+	} __attribute__((packed));
+	/* personality to use, if used */
+	__u16	personality;
+	union {
+		__s32	splice_fd_in;
+		__u32	file_index;
+		__u32	optlen;
+		struct {
+			__u16	addr_len;
+			__u16	__pad3[1];
+		};
+	};
+	union {
+		struct {
+			__u64	addr3;
+			__u64	__pad2[1];
+		};
+		__u64	optval;
+		/*
+		 * If the ring is initialized with IORING_SETUP_SQE128, then
+		 * this field is used for 80 bytes of arbitrary command data
+		 */
+		__u8	cmd[0];
+	};
+};
+
+/*
+ * If sqe->file_index is set to this for opcodes that instantiate a new
+ * direct descriptor (like openat/openat2/accept), then io_uring will allocate
+ * an available direct descriptor instead of having the application pass one
+ * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE
+ * if the space is full.
+ */
+#define IORING_FILE_INDEX_ALLOC		(~0U)
+
+enum {
+	IOSQE_FIXED_FILE_BIT,
+	IOSQE_IO_DRAIN_BIT,
+	IOSQE_IO_LINK_BIT,
+	IOSQE_IO_HARDLINK_BIT,
+	IOSQE_ASYNC_BIT,
+	IOSQE_BUFFER_SELECT_BIT,
+	IOSQE_CQE_SKIP_SUCCESS_BIT,
+};
+
+/*
+ * sqe->flags
+ */
+/* use fixed fileset */
+#define IOSQE_FIXED_FILE	(1U << IOSQE_FIXED_FILE_BIT)
+/* issue after inflight IO */
+#define IOSQE_IO_DRAIN		(1U << IOSQE_IO_DRAIN_BIT)
+/* links next sqe */
+#define IOSQE_IO_LINK		(1U << IOSQE_IO_LINK_BIT)
+/* like LINK, but stronger */
+#define IOSQE_IO_HARDLINK	(1U << IOSQE_IO_HARDLINK_BIT)
+/* always go async */
+#define IOSQE_ASYNC		(1U << IOSQE_ASYNC_BIT)
+/* select buffer from sqe->buf_group */
+#define IOSQE_BUFFER_SELECT	(1U << IOSQE_BUFFER_SELECT_BIT)
+/* don't post CQE if request succeeded */
+#define IOSQE_CQE_SKIP_SUCCESS	(1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+
+/*
+ * io_uring_setup() flags
+ */
+#define IORING_SETUP_IOPOLL	(1U << 0)	/* io_context is polled */
+#define IORING_SETUP_SQPOLL	(1U << 1)	/* SQ poll thread */
+#define IORING_SETUP_SQ_AFF	(1U << 2)	/* sq_thread_cpu is valid */
+#define IORING_SETUP_CQSIZE	(1U << 3)	/* app defines CQ size */
+#define IORING_SETUP_CLAMP	(1U << 4)	/* clamp SQ/CQ ring sizes */
+#define IORING_SETUP_ATTACH_WQ	(1U << 5)	/* attach to existing wq */
+#define IORING_SETUP_R_DISABLED	(1U << 6)	/* start with ring disabled */
+#define IORING_SETUP_SUBMIT_ALL	(1U << 7)	/* continue submit on error */
+/*
+ * Cooperative task running. When requests complete, they often require
+ * forcing the submitter to transition to the kernel to complete. If this
+ * flag is set, work will be done when the task transitions anyway, rather
+ * than force an inter-processor interrupt reschedule. This avoids interrupting
+ * a task running in userspace, and saves an IPI.
+ */
+#define IORING_SETUP_COOP_TASKRUN	(1U << 8)
+/*
+ * If COOP_TASKRUN is set, get notified if task work is available for
+ * running and a kernel transition would be needed to run it. This sets
+ * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN.
+ */
+#define IORING_SETUP_TASKRUN_FLAG	(1U << 9)
+#define IORING_SETUP_SQE128		(1U << 10) /* SQEs are 128 byte */
+#define IORING_SETUP_CQE32		(1U << 11) /* CQEs are 32 byte */
+/*
+ * Only one task is allowed to submit requests
+ */
+#define IORING_SETUP_SINGLE_ISSUER	(1U << 12)
+
+/*
+ * Defer running task work to get events.
+ * Rather than running bits of task work whenever the task transitions
+ * try to do it just before it is needed.
+ */
+#define IORING_SETUP_DEFER_TASKRUN	(1U << 13)
+
+/*
+ * Application provides the memory for the rings
+ */
+#define IORING_SETUP_NO_MMAP		(1U << 14)
+
+/*
+ * Register the ring fd in itself for use with
+ * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather
+ * than an fd.
+ */
+#define IORING_SETUP_REGISTERED_FD_ONLY	(1U << 15)
+
+/*
+ * Removes indirection through the SQ index array.
+ */
+#define IORING_SETUP_NO_SQARRAY		(1U << 16)
+
+enum io_uring_op {
+	IORING_OP_NOP,
+	IORING_OP_READV,
+	IORING_OP_WRITEV,
+	IORING_OP_FSYNC,
+	IORING_OP_READ_FIXED,
+	IORING_OP_WRITE_FIXED,
+	IORING_OP_POLL_ADD,
+	IORING_OP_POLL_REMOVE,
+	IORING_OP_SYNC_FILE_RANGE,
+	IORING_OP_SENDMSG,
+	IORING_OP_RECVMSG,
+	IORING_OP_TIMEOUT,
+	IORING_OP_TIMEOUT_REMOVE,
+	IORING_OP_ACCEPT,
+	IORING_OP_ASYNC_CANCEL,
+	IORING_OP_LINK_TIMEOUT,
+	IORING_OP_CONNECT,
+	IORING_OP_FALLOCATE,
+	IORING_OP_OPENAT,
+	IORING_OP_CLOSE,
+	IORING_OP_FILES_UPDATE,
+	IORING_OP_STATX,
+	IORING_OP_READ,
+	IORING_OP_WRITE,
+	IORING_OP_FADVISE,
+	IORING_OP_MADVISE,
+	IORING_OP_SEND,
+	IORING_OP_RECV,
+	IORING_OP_OPENAT2,
+	IORING_OP_EPOLL_CTL,
+	IORING_OP_SPLICE,
+	IORING_OP_PROVIDE_BUFFERS,
+	IORING_OP_REMOVE_BUFFERS,
+	IORING_OP_TEE,
+	IORING_OP_SHUTDOWN,
+	IORING_OP_RENAMEAT,
+	IORING_OP_UNLINKAT,
+	IORING_OP_MKDIRAT,
+	IORING_OP_SYMLINKAT,
+	IORING_OP_LINKAT,
+	IORING_OP_MSG_RING,
+	IORING_OP_FSETXATTR,
+	IORING_OP_SETXATTR,
+	IORING_OP_FGETXATTR,
+	IORING_OP_GETXATTR,
+	IORING_OP_SOCKET,
+	IORING_OP_URING_CMD,
+	IORING_OP_SEND_ZC,
+	IORING_OP_SENDMSG_ZC,
+	IORING_OP_READ_MULTISHOT,
+	IORING_OP_WAITID,
+	IORING_OP_FUTEX_WAIT,
+	IORING_OP_FUTEX_WAKE,
+	IORING_OP_FUTEX_WAITV,
+
+	/* this goes last, obviously */
+	IORING_OP_LAST,
+};
+
+/*
+ * sqe->uring_cmd_flags		top 8bits aren't available for userspace
+ * IORING_URING_CMD_FIXED	use registered buffer; pass this flag
+ *				along with setting sqe->buf_index.
+ */
+#define IORING_URING_CMD_FIXED	(1U << 0)
+#define IORING_URING_CMD_MASK	IORING_URING_CMD_FIXED
+
+
+/*
+ * sqe->fsync_flags
+ */
+#define IORING_FSYNC_DATASYNC	(1U << 0)
+
+/*
+ * sqe->timeout_flags
+ */
+#define IORING_TIMEOUT_ABS		(1U << 0)
+#define IORING_TIMEOUT_UPDATE		(1U << 1)
+#define IORING_TIMEOUT_BOOTTIME		(1U << 2)
+#define IORING_TIMEOUT_REALTIME		(1U << 3)
+#define IORING_LINK_TIMEOUT_UPDATE	(1U << 4)
+#define IORING_TIMEOUT_ETIME_SUCCESS	(1U << 5)
+#define IORING_TIMEOUT_MULTISHOT	(1U << 6)
+#define IORING_TIMEOUT_CLOCK_MASK	(IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME)
+#define IORING_TIMEOUT_UPDATE_MASK	(IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE)
+/*
+ * sqe->splice_flags
+ * extends splice(2) flags
+ */
+#define SPLICE_F_FD_IN_FIXED	(1U << 31) /* the last bit of __u32 */
+
+/*
+ * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the
+ * command flags for POLL_ADD are stored in sqe->len.
+ *
+ * IORING_POLL_ADD_MULTI	Multishot poll. Sets IORING_CQE_F_MORE if
+ *				the poll handler will continue to report
+ *				CQEs on behalf of the same SQE.
+ *
+ * IORING_POLL_UPDATE		Update existing poll request, matching
+ *				sqe->addr as the old user_data field.
+ *
+ * IORING_POLL_LEVEL		Level triggered poll.
+ */
+#define IORING_POLL_ADD_MULTI	(1U << 0)
+#define IORING_POLL_UPDATE_EVENTS	(1U << 1)
+#define IORING_POLL_UPDATE_USER_DATA	(1U << 2)
+#define IORING_POLL_ADD_LEVEL		(1U << 3)
+
+/*
+ * ASYNC_CANCEL flags.
+ *
+ * IORING_ASYNC_CANCEL_ALL	Cancel all requests that match the given key
+ * IORING_ASYNC_CANCEL_FD	Key off 'fd' for cancelation rather than the
+ *				request 'user_data'
+ * IORING_ASYNC_CANCEL_ANY	Match any request
+ * IORING_ASYNC_CANCEL_FD_FIXED	'fd' passed in is a fixed descriptor
+ * IORING_ASYNC_CANCEL_USERDATA	Match on user_data, default for no other key
+ * IORING_ASYNC_CANCEL_OP	Match request based on opcode
+ */
+#define IORING_ASYNC_CANCEL_ALL	(1U << 0)
+#define IORING_ASYNC_CANCEL_FD	(1U << 1)
+#define IORING_ASYNC_CANCEL_ANY	(1U << 2)
+#define IORING_ASYNC_CANCEL_FD_FIXED	(1U << 3)
+#define IORING_ASYNC_CANCEL_USERDATA	(1U << 4)
+#define IORING_ASYNC_CANCEL_OP	(1U << 5)
+
+/*
+ * send/sendmsg and recv/recvmsg flags (sqe->ioprio)
+ *
+ * IORING_RECVSEND_POLL_FIRST	If set, instead of first attempting to send
+ *				or receive and arm poll if that yields an
+ *				-EAGAIN result, arm poll upfront and skip
+ *				the initial transfer attempt.
+ *
+ * IORING_RECV_MULTISHOT	Multishot recv. Sets IORING_CQE_F_MORE if
+ *				the handler will continue to report
+ *				CQEs on behalf of the same SQE.
+ *
+ * IORING_RECVSEND_FIXED_BUF	Use registered buffers, the index is stored in
+ *				the buf_index field.
+ *
+ * IORING_SEND_ZC_REPORT_USAGE
+ *				If set, SEND[MSG]_ZC should report
+ *				the zerocopy usage in cqe.res
+ *				for the IORING_CQE_F_NOTIF cqe.
+ *				0 is reported if zerocopy was actually possible.
+ *				IORING_NOTIF_USAGE_ZC_COPIED if data was copied
+ *				(at least partially).
+ */
+#define IORING_RECVSEND_POLL_FIRST	(1U << 0)
+#define IORING_RECV_MULTISHOT		(1U << 1)
+#define IORING_RECVSEND_FIXED_BUF	(1U << 2)
+#define IORING_SEND_ZC_REPORT_USAGE	(1U << 3)
+
+/*
+ * cqe.res for IORING_CQE_F_NOTIF if
+ * IORING_SEND_ZC_REPORT_USAGE was requested
+ *
+ * It should be treated as a flag, all other
+ * bits of cqe.res should be treated as reserved!
+ */
+#define IORING_NOTIF_USAGE_ZC_COPIED    (1U << 31)
+
+/*
+ * accept flags stored in sqe->ioprio
+ */
+#define IORING_ACCEPT_MULTISHOT	(1U << 0)
+
+/*
+ * IORING_OP_MSG_RING command types, stored in sqe->addr
+ */
+enum {
+	IORING_MSG_DATA,	/* pass sqe->len as 'res' and off as user_data */
+	IORING_MSG_SEND_FD,	/* send a registered fd to another ring */
+};
+
+/*
+ * IORING_OP_MSG_RING flags (sqe->msg_ring_flags)
+ *
+ * IORING_MSG_RING_CQE_SKIP	Don't post a CQE to the target ring. Not
+ *				applicable for IORING_MSG_DATA, obviously.
+ */
+#define IORING_MSG_RING_CQE_SKIP	(1U << 0)
+/* Pass through the flags from sqe->file_index to cqe->flags */
+#define IORING_MSG_RING_FLAGS_PASS	(1U << 1)
+
+/*
+ * IO completion data structure (Completion Queue Entry)
+ */
+struct io_uring_cqe {
+	__u64	user_data;	/* sqe->data submission passed back */
+	__s32	res;		/* result code for this event */
+	__u32	flags;
+
+	/*
+	 * If the ring is initialized with IORING_SETUP_CQE32, then this field
+	 * contains 16-bytes of padding, doubling the size of the CQE.
+	 */
+	__u64 big_cqe[];
+};
+
+/*
+ * cqe->flags
+ *
+ * IORING_CQE_F_BUFFER	If set, the upper 16 bits are the buffer ID
+ * IORING_CQE_F_MORE	If set, parent SQE will generate more CQE entries
+ * IORING_CQE_F_SOCK_NONEMPTY	If set, more data to read after socket recv
+ * IORING_CQE_F_NOTIF	Set for notification CQEs. Can be used to distinct
+ * 			them from sends.
+ */
+#define IORING_CQE_F_BUFFER		(1U << 0)
+#define IORING_CQE_F_MORE		(1U << 1)
+#define IORING_CQE_F_SOCK_NONEMPTY	(1U << 2)
+#define IORING_CQE_F_NOTIF		(1U << 3)
+
+enum {
+	IORING_CQE_BUFFER_SHIFT		= 16,
+};
+
+/*
+ * Magic offsets for the application to mmap the data it needs
+ */
+#define IORING_OFF_SQ_RING		0ULL
+#define IORING_OFF_CQ_RING		0x8000000ULL
+#define IORING_OFF_SQES			0x10000000ULL
+#define IORING_OFF_PBUF_RING		0x80000000ULL
+#define IORING_OFF_PBUF_SHIFT		16
+#define IORING_OFF_MMAP_MASK		0xf8000000ULL
+
+/*
+ * Filled with the offset for mmap(2)
+ */
+struct io_sqring_offsets {
+	__u32 head;
+	__u32 tail;
+	__u32 ring_mask;
+	__u32 ring_entries;
+	__u32 flags;
+	__u32 dropped;
+	__u32 array;
+	__u32 resv1;
+	__u64 user_addr;
+};
+
+/*
+ * sq_ring->flags
+ */
+#define IORING_SQ_NEED_WAKEUP	(1U << 0) /* needs io_uring_enter wakeup */
+#define IORING_SQ_CQ_OVERFLOW	(1U << 1) /* CQ ring is overflown */
+#define IORING_SQ_TASKRUN	(1U << 2) /* task should enter the kernel */
+
+struct io_cqring_offsets {
+	__u32 head;
+	__u32 tail;
+	__u32 ring_mask;
+	__u32 ring_entries;
+	__u32 overflow;
+	__u32 cqes;
+	__u32 flags;
+	__u32 resv1;
+	__u64 user_addr;
+};
+
+/*
+ * cq_ring->flags
+ */
+
+/* disable eventfd notifications */
+#define IORING_CQ_EVENTFD_DISABLED	(1U << 0)
+
+/*
+ * io_uring_enter(2) flags
+ */
+#define IORING_ENTER_GETEVENTS		(1U << 0)
+#define IORING_ENTER_SQ_WAKEUP		(1U << 1)
+#define IORING_ENTER_SQ_WAIT		(1U << 2)
+#define IORING_ENTER_EXT_ARG		(1U << 3)
+#define IORING_ENTER_REGISTERED_RING	(1U << 4)
+
+/*
+ * Passed in for io_uring_setup(2). Copied back with updated info on success
+ */
+struct io_uring_params {
+	__u32 sq_entries;
+	__u32 cq_entries;
+	__u32 flags;
+	__u32 sq_thread_cpu;
+	__u32 sq_thread_idle;
+	__u32 features;
+	__u32 wq_fd;
+	__u32 resv[3];
+	struct io_sqring_offsets sq_off;
+	struct io_cqring_offsets cq_off;
+};
+
+/*
+ * io_uring_params->features flags
+ */
+#define IORING_FEAT_SINGLE_MMAP		(1U << 0)
+#define IORING_FEAT_NODROP		(1U << 1)
+#define IORING_FEAT_SUBMIT_STABLE	(1U << 2)
+#define IORING_FEAT_RW_CUR_POS		(1U << 3)
+#define IORING_FEAT_CUR_PERSONALITY	(1U << 4)
+#define IORING_FEAT_FAST_POLL		(1U << 5)
+#define IORING_FEAT_POLL_32BITS 	(1U << 6)
+#define IORING_FEAT_SQPOLL_NONFIXED	(1U << 7)
+#define IORING_FEAT_EXT_ARG		(1U << 8)
+#define IORING_FEAT_NATIVE_WORKERS	(1U << 9)
+#define IORING_FEAT_RSRC_TAGS		(1U << 10)
+#define IORING_FEAT_CQE_SKIP		(1U << 11)
+#define IORING_FEAT_LINKED_FILE		(1U << 12)
+#define IORING_FEAT_REG_REG_RING	(1U << 13)
+
+/*
+ * io_uring_register(2) opcodes and arguments
+ */
+enum {
+	IORING_REGISTER_BUFFERS			= 0,
+	IORING_UNREGISTER_BUFFERS		= 1,
+	IORING_REGISTER_FILES			= 2,
+	IORING_UNREGISTER_FILES			= 3,
+	IORING_REGISTER_EVENTFD			= 4,
+	IORING_UNREGISTER_EVENTFD		= 5,
+	IORING_REGISTER_FILES_UPDATE		= 6,
+	IORING_REGISTER_EVENTFD_ASYNC		= 7,
+	IORING_REGISTER_PROBE			= 8,
+	IORING_REGISTER_PERSONALITY		= 9,
+	IORING_UNREGISTER_PERSONALITY		= 10,
+	IORING_REGISTER_RESTRICTIONS		= 11,
+	IORING_REGISTER_ENABLE_RINGS		= 12,
+
+	/* extended with tagging */
+	IORING_REGISTER_FILES2			= 13,
+	IORING_REGISTER_FILES_UPDATE2		= 14,
+	IORING_REGISTER_BUFFERS2		= 15,
+	IORING_REGISTER_BUFFERS_UPDATE		= 16,
+
+	/* set/clear io-wq thread affinities */
+	IORING_REGISTER_IOWQ_AFF		= 17,
+	IORING_UNREGISTER_IOWQ_AFF		= 18,
+
+	/* set/get max number of io-wq workers */
+	IORING_REGISTER_IOWQ_MAX_WORKERS	= 19,
+
+	/* register/unregister io_uring fd with the ring */
+	IORING_REGISTER_RING_FDS		= 20,
+	IORING_UNREGISTER_RING_FDS		= 21,
+
+	/* register ring based provide buffer group */
+	IORING_REGISTER_PBUF_RING		= 22,
+	IORING_UNREGISTER_PBUF_RING		= 23,
+
+	/* sync cancelation API */
+	IORING_REGISTER_SYNC_CANCEL		= 24,
+
+	/* register a range of fixed file slots for automatic slot allocation */
+	IORING_REGISTER_FILE_ALLOC_RANGE	= 25,
+
+	/* this goes last */
+	IORING_REGISTER_LAST,
+
+	/* flag added to the opcode to use a registered ring fd */
+	IORING_REGISTER_USE_REGISTERED_RING	= 1U << 31
+};
+
+/* io-wq worker categories */
+enum {
+	IO_WQ_BOUND,
+	IO_WQ_UNBOUND,
+};
+
+/* deprecated, see struct io_uring_rsrc_update */
+struct io_uring_files_update {
+	__u32 offset;
+	__u32 resv;
+	__aligned_u64 /* __s32 * */ fds;
+};
+
+/*
+ * Register a fully sparse file space, rather than pass in an array of all
+ * -1 file descriptors.
+ */
+#define IORING_RSRC_REGISTER_SPARSE	(1U << 0)
+
+struct io_uring_rsrc_register {
+	__u32 nr;
+	__u32 flags;
+	__u64 resv2;
+	__aligned_u64 data;
+	__aligned_u64 tags;
+};
+
+struct io_uring_rsrc_update {
+	__u32 offset;
+	__u32 resv;
+	__aligned_u64 data;
+};
+
+struct io_uring_rsrc_update2 {
+	__u32 offset;
+	__u32 resv;
+	__aligned_u64 data;
+	__aligned_u64 tags;
+	__u32 nr;
+	__u32 resv2;
+};
+
+/* Skip updating fd indexes set to this value in the fd table */
+#define IORING_REGISTER_FILES_SKIP	(-2)
+
+#define IO_URING_OP_SUPPORTED	(1U << 0)
+
+struct io_uring_probe_op {
+	__u8 op;
+	__u8 resv;
+	__u16 flags;	/* IO_URING_OP_* flags */
+	__u32 resv2;
+};
+
+struct io_uring_probe {
+	__u8 last_op;	/* last opcode supported */
+	__u8 ops_len;	/* length of ops[] array below */
+	__u16 resv;
+	__u32 resv2[3];
+	struct io_uring_probe_op ops[];
+};
+
+struct io_uring_restriction {
+	__u16 opcode;
+	union {
+		__u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */
+		__u8 sqe_op;      /* IORING_RESTRICTION_SQE_OP */
+		__u8 sqe_flags;   /* IORING_RESTRICTION_SQE_FLAGS_* */
+	};
+	__u8 resv;
+	__u32 resv2[3];
+};
+
+struct io_uring_buf {
+	__u64	addr;
+	__u32	len;
+	__u16	bid;
+	__u16	resv;
+};
+
+struct io_uring_buf_ring {
+	union {
+		/*
+		 * To avoid spilling into more pages than we need to, the
+		 * ring tail is overlaid with the io_uring_buf->resv field.
+		 */
+		struct {
+			__u64	resv1;
+			__u32	resv2;
+			__u16	resv3;
+			__u16	tail;
+		};
+		__DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs);
+	};
+};
+
+/*
+ * Flags for IORING_REGISTER_PBUF_RING.
+ *
+ * IOU_PBUF_RING_MMAP:	If set, kernel will allocate the memory for the ring.
+ *			The application must not set a ring_addr in struct
+ *			io_uring_buf_reg, instead it must subsequently call
+ *			mmap(2) with the offset set as:
+ *			IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
+ *			to get a virtual mapping for the ring.
+ */
+enum {
+	IOU_PBUF_RING_MMAP	= 1,
+};
+
+/* argument for IORING_(UN)REGISTER_PBUF_RING */
+struct io_uring_buf_reg {
+	__u64	ring_addr;
+	__u32	ring_entries;
+	__u16	bgid;
+	__u16	flags;
+	__u64	resv[3];
+};
+
+/*
+ * io_uring_restriction->opcode values
+ */
+enum {
+	/* Allow an io_uring_register(2) opcode */
+	IORING_RESTRICTION_REGISTER_OP		= 0,
+
+	/* Allow an sqe opcode */
+	IORING_RESTRICTION_SQE_OP		= 1,
+
+	/* Allow sqe flags */
+	IORING_RESTRICTION_SQE_FLAGS_ALLOWED	= 2,
+
+	/* Require sqe flags (these flags must be set on each submission) */
+	IORING_RESTRICTION_SQE_FLAGS_REQUIRED	= 3,
+
+	IORING_RESTRICTION_LAST
+};
+
+struct io_uring_getevents_arg {
+	__u64	sigmask;
+	__u32	sigmask_sz;
+	__u32	pad;
+	__u64	ts;
+};
+
+/*
+ * Argument for IORING_REGISTER_SYNC_CANCEL
+ */
+struct io_uring_sync_cancel_reg {
+	__u64				addr;
+	__s32				fd;
+	__u32				flags;
+	struct __kernel_timespec	timeout;
+	__u8				opcode;
+	__u8				pad[7];
+	__u64				pad2[3];
+};
+
+/*
+ * Argument for IORING_REGISTER_FILE_ALLOC_RANGE
+ * The range is specified as [off, off + len)
+ */
+struct io_uring_file_index_range {
+	__u32	off;
+	__u32	len;
+	__u64	resv;
+};
+
+struct io_uring_recvmsg_out {
+	__u32 namelen;
+	__u32 controllen;
+	__u32 payloadlen;
+	__u32 flags;
+};
+
+/*
+ * Argument for IORING_OP_URING_CMD when file is a socket
+ */
+enum {
+	SOCKET_URING_OP_SIOCINQ		= 0,
+	SOCKET_URING_OP_SIOCOUTQ,
+	SOCKET_URING_OP_GETSOCKOPT,
+	SOCKET_URING_OP_SETSOCKOPT,
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
-- 
2.34.1

Powered by blists - more mailing lists