lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2245614.iZASKD2KPV@steina-w>
Date: Mon, 16 Oct 2023 10:48:16 +0200
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Stephen Hemminger <stephen@...workplumber.org>, Miquel Raynal <miquel.raynal@...tlin.com>
Cc: Andrew Lunn <andrew@...n.ch>, Wei Fang <wei.fang@....com>, Shenwei Wang <shenwei.wang@....com>, Clark Wang <xiaoning.wang@....com>, Russell King <linux@...linux.org.uk>, davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org, pabeni@...hat.com, linux-imx@....com, netdev@...r.kernel.org, Thomas Petazzoni <thomas.petazzoni@...tlin.com>, Alexandre Belloni <alexandre.belloni@...tlin.com>, Maxime Chevallier <maxime.chevallier@...tlin.com>
Subject: Re: Ethernet issue on imx6

Hi Miquel,

Am Freitag, 13. Oktober 2023, 10:27:18 CEST schrieb Miquel Raynal:
> Hi Stephen & Andrew,
> 
> stephen@...workplumber.org wrote on Thu, 12 Oct 2023 15:58:57 -0700:
> > On Thu, 12 Oct 2023 22:46:09 +0200
> > 
> > Andrew Lunn <andrew@...n.ch> wrote:
> > > > //192.168.1.1 is my host, so the below lines are from the board:
> > > > # iperf3 -c 192.168.1.1 -u -b100M
> > > > [  5]   0.00-10.05  sec   113 MBytes  94.6 Mbits/sec  0.044 ms 
> > > > 467/82603 (0.57%)  receiver # iperf3 -c 192.168.1.1 -u -b90M
> > > > [  5]   0.00-10.04  sec  90.5 MBytes  75.6 Mbits/sec  0.146 ms 
> > > > 12163/77688 (16%)  receiver # iperf3 -c 192.168.1.1 -u -b80M
> > > > [  5]   0.00-10.05  sec  66.4 MBytes  55.5 Mbits/sec  0.162 ms 
> > > > 20937/69055 (30%)  receiver> > 
> > > Have you tried playing with ‐‐pacing‐timer ?
> > > 
> > > Maybe iperf is producing a big bursts of packets and then silence for
> > > a while. The burst is overflowing a buffer somewhere? Smooth the flow
> > > and it might work better?
> 
> I've just tried and the results are kind of the opposite of what I
> would expect. Here are the values so maybe you'll have a different
> understanding:
> 
> From --pacing-timer 1 to 100000 (should be microseconds IIUC), results
> are the same. And then, increasing the period decreases the drop rate:
> 
> # iperf3 -c 192.168.1.1 -u -b1M --pacing-timer 1000
> [  5]   0.00-10.04  sec   604 KBytes   493 Kbits/sec  0.062 ms  437/864
> (51%)  receiver # iperf3 -c 192.168.1.1 -u -b1M --pacing-timer 10000
> [  5]   0.00-10.05  sec   581 KBytes   474 Kbits/sec  0.102 ms  452/863
> (52%)  receiver # iperf3 -c 192.168.1.1 -u -b1M --pacing-timer 100000
> [  5]   0.00-10.05  sec   867 KBytes   707 Kbits/sec  0.094 ms  240/853
> (28%)  receiver # iperf3 -c 192.168.1.1 -u -b1M --pacing-timer 1000000
> [  5]   0.00-10.05  sec  1.04 MBytes   866 Kbits/sec  0.080 ms  27/778
> (3.5%)  receiver
> > Please post the basic system info.
> > Like kernel dmesg log.
> 
> Please find the logs below.
> 
> > All network statistics including ethtool.
> 
> PHY statistics remain empty:
> 
> # ethtool --phy-statistics eth0
> PHY statistics:
>      phy_receive_errors: 0
>      phy_idle_errors: 0
> 
> Interrupts work as expected on the MAC side (I added traces in the IRQ
> handler to see how it was behaving):
> 
> # cat /proc/interrupts | grep ethernet
>  82:     344546          0          0          0  gpio-mxc   6 Level    
> 2188000.ethernet 104:          1          0          0          0  gpio-mxc
>  28 Level     2188000.ethernet 337:          0          0          0       
>   0     GIC-0 151 Level     2188000.ethernet
> 
> # ethtool -S eth0
> NIC statistics:
>      tx_dropped: 0
>      tx_packets: 10118
>      tx_broadcast: 0
>      tx_multicast: 13
>      tx_crc_errors: 0
>      tx_undersize: 0
>      tx_oversize: 0
>      tx_fragment: 0
>      tx_jabber: 0
>      tx_collision: 0
>      tx_64byte: 130
>      tx_65to127byte: 61031
>      tx_128to255byte: 19
>      tx_256to511byte: 10
>      tx_512to1023byte: 5
>      tx_1024to2047byte: 14459
>      tx_GTE2048byte: 0
>      tx_octets: 26219280
>      IEEE_tx_drop: 0
>      IEEE_tx_frame_ok: 10118
>      IEEE_tx_1col: 0
>      IEEE_tx_mcol: 0
>      IEEE_tx_def: 0
>      IEEE_tx_lcol: 0
>      IEEE_tx_excol: 0
>      IEEE_tx_macerr: 0
>      IEEE_tx_cserr: 0
>      IEEE_tx_sqe: 0
>      IEEE_tx_fdxfc: 0
>      IEEE_tx_octets_ok: 26219280
>      rx_packets: 35369
>      rx_broadcast: 1
>      rx_multicast: 5
>      rx_crc_errors: 0
>      rx_undersize: 0
>      rx_oversize: 0
>      rx_fragment: 0
>      rx_jabber: 0
>      rx_64byte: 10
>      rx_65to127byte: 9083
>      rx_128to255byte: 8
>      rx_256to511byte: 8
>      rx_512to1023byte: 0
>      rx_1024to2047byte: 26260
>      rx_GTE2048byte: 0
>      rx_octets: 436459630
>      IEEE_rx_drop: 0
>      IEEE_rx_frame_ok: 35369
>      IEEE_rx_crc: 0
>      IEEE_rx_align: 0
>      IEEE_rx_macerr: 0
>      IEEE_rx_fdxfc: 0
>      IEEE_rx_octets_ok: 436459630
> 
> > Any special qdisc or firewall configuration.
> 
> None.
> 
> > Likely a hardware or driver bug that is doing something wrong
> > when a lot of packets are received.
> 
> Well, isn't it kind of the opposite? If we flood the interface it works
> better than when we pace the traffic (that's what I see whenever I
> reduce the throughput or when I enlarge the iperf timer).
> 
> I'm also doubtful about the fact that receiving full speed traffic makes
> the uplink stable.
> 
> Thanks,
> Miquèl
> 
> ---
> 
> switch to partitions #0, OK
> mmc1 is current device
> reading boot.scr
> 444 bytes read in 10 ms (43 KiB/s)
> ## Executing script at 20000000
> Booting from mmc ...
> reading zImage
> 9160016 bytes read in 462 ms (18.9 MiB/s)
> reading <board>.dtb

Which device tree is that?

> 40052 bytes read in 22 ms (1.7 MiB/s)
> boot device tree kernel ...
> Kernel image @ 0x12000000 [ 0x000000 - 0x8bc550 ]
> ## Flattened Device Tree blob at 18000000
>    Booting using the fdt blob at 0x18000000
>    Using Device Tree in place at 18000000, end 1800cc73
> 
> Starting kernel ...
> 
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Linux version 6.5.0 (mraynal@...-13) (arm-linux-gcc.br_real
> (Buildroot 2 020.08-14-ge5a2a90) 10.2.0, GNU ld (GNU Binutils) 2.34) #120
> SMP Thu Oct 12 18:10:20 CE ST 2023
> [    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7),
> cr=10c5387d [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
> aliasing instruction cache
> [    0.000000] OF: fdt: Machine model: TQ TQMa6Q
> on MBa6x

Your first mail mentions a custom board, but this indicates "TQMa6Q
on MBa6x", so which is it?
Please note that there are two different module variants, imx6qdl-tqma6a.dtsi 
and imx6qdl-tqma6b.dtsi. They deal with i.MX6's ERR006687 differently.
Package drop without any load somewhat indicates this issue.

Best regards,
Alexander

> [    0.000000] Memory policy: Data cache writealloc
> [    0.000000] cma: Reserved 160 MiB at 0x46000000
> [    0.000000] Zone ranges:
> [    0.000000]   Normal   [mem 0x0000000010000000-0x000000003fffffff]
> [    0.000000]   HighMem  [mem 0x0000000040000000-0x000000004fffffff]
> [    0.000000] Movable zone start for each node
> [    0.000000] Early memory node ranges
> [    0.000000]   node   0: [mem 0x0000000010000000-0x000000004fffffff]
> [    0.000000] Initmem setup node 0 [mem
> 0x0000000010000000-0x000000004fffffff] [    0.000000] percpu: Embedded 13
> pages/cpu s23124 r8192 d21932 u53248 [    0.000000] Kernel command line:
> root=/dev/mmcblk1p2 ro rootwait console=ttymxc1,115 200 cma=160M
> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes, linear) [    0.000000] Inode-cache hash table entries: 65536 (order:
> 6, 262144 bytes, linear) [    0.000000] Built 1 zonelists, mobility
> grouping on.  Total pages: 260608 [    0.000000] mem auto-init: stack:off,
> heap alloc:off, heap free:off [    0.000000] Memory: 854196K/1048576K
> available (13312K kernel code, 1308K rwdata, 39 44K rodata, 1024K init,
> 401K bss, 30540K reserved, 163840K cma-reserved, 98304K highmem )
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [    0.000000] rcu: Hierarchical RCU implementation.
> [    0.000000] rcu:     RCU event tracing is enabled.
> [    0.000000]  Tracing variant of Tasks RCU enabled.
> [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10
> jiffies. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
> [    0.000000] L2C-310 errata 752271 769419 enabled
> [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
> [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
> [    0.000000] L2C-310 ID prefetch enabled, offset 16 lines
> [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
> [    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
> [    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
> [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on
> contention. [    0.000000] Switching to timer-based delay loop, resolution
> 333ns [    0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns,
> wraps every 715827882 841ns
> [    0.000018] clocksource: mxc_timer1: mask: 0xffffffff max_cycles:
> 0xffffffff, max_id le_ns: 637086815595 ns
> [    0.001530] Console: colour dummy device 80x30
> [    0.001571] Calibrating delay loop (skipped), value calculated using
> timer frequency .. 6.00 BogoMIPS (lpj=30000)
> [    0.001587] CPU: Testing write buffer coherency: ok
> [    0.001625] CPU0: Spectre v2: using BPIALL workaround
> [    0.001633] pid_max: default: 32768 minimum: 301
> [    0.001764] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes,
> linear) [    0.001787] Mountpoint-cache hash table entries: 2048 (order: 1,
> 8192 bytes, linear) [    0.002589] CPU0: thread -1, cpu 0, socket 0, mpidr
> 80000000
> [    0.003612] RCU Tasks Trace: Setting shift to 2 and lim to 1
> rcu_task_cb_adjust=1. [    0.003775] Setting up static identity map for
> 0x10100000 - 0x10100078 [    0.003964] rcu: Hierarchical SRCU
> implementation.
> [    0.003970] rcu:     Max phase no-delay instances is 1000.
> [    0.005041] smp: Bringing up secondary CPUs ...
> [    0.005965] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [    0.005983] CPU1: Spectre v2: using BPIALL workaround
> [    0.007009] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
> [    0.007025] CPU2: Spectre v2: using BPIALL workaround
> [    0.008023] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
> [    0.008040] CPU3: Spectre v2: using BPIALL workaround
> [    0.008149] smp: Brought up 1 node, 4 CPUs
> [    0.008161] SMP: Total of 4 processors activated (24.00 BogoMIPS).
> [    0.008171] CPU: All CPU(s) started in SVC mode.
> [    0.008688] devtmpfs: initialized
> [    0.017370] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 4 [    0.017636] clocksource: jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ ns: 19112604462750000 ns
> [    0.017660] futex hash table entries: 1024 (order: 4, 65536 bytes,
> linear) [    0.025946] pinctrl core: initialized pinctrl subsystem
> [    0.027948] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [    0.035191] DMA: preallocated 256 KiB pool for atomic coherent
> allocations [    0.036387] thermal_sys: Registered thermal governor
> 'step_wise' [    0.036449] cpuidle: using governor menu
> [    0.036568] CPU identified as i.MX6Q, silicon rev 1.5
> [    0.042593] platform soc: Fixed dependency cycle(s) with
> /soc/aips-bus@...00000/gpc@ 020dc000
> [    0.057409] platform 2400000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/ldb/lvds-channel@...ort@...ndpoint
> [    0.057451] platform 2400000.ipu: Fixed dependency cycle(s) with
> /soc/hdmi@...0000/p ort@...ndpoint
> [    0.057476] platform 2400000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/ldb/lvds-channel@...ort@...ndpoint
> [    0.057507] platform 2400000.ipu: Fixed dependency cycle(s) with
> /soc/hdmi@...0000/p ort@...ndpoint
> [    0.057530] platform 2400000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/iomuxc-gpr@...e0000/ipu1_csi0_mux/port@...ndpoint
> [    0.058449] platform 2800000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/ldb/lvds-channel@...ort@...ndpoint
> [    0.058510] platform 2800000.ipu: Fixed dependency cycle(s) with
> /soc/hdmi@...0000/p ort@...ndpoint
> [    0.058558] platform 2800000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/ldb/lvds-channel@...ort@...ndpoint
> [    0.058611] platform 2800000.ipu: Fixed dependency cycle(s) with
> /soc/hdmi@...0000/p ort@...ndpoint
> [    0.058633] platform 2800000.ipu: Fixed dependency cycle(s) with
> /soc/aips-bus@...00 000/iomuxc-gpr@...e0000/ipu2_csi1_mux/port@...ndpoint
> [    0.061550] No ATAGs?
> [    0.061690] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
> watchpoint registe rs.
> [    0.061702] hw-breakpoint: maximum watchpoint size is 4 bytes.
> [    0.063055] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
> [    0.067250] kprobes: kprobe jump-optimization is enabled. All kprobes are
> optimized if possible.
> [    0.068787] gpio gpiochip0: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.070727] gpio gpiochip1: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.072435] gpio gpiochip2: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.074182] gpio gpiochip3: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.075910] gpio gpiochip4: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.077677] gpio gpiochip5: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.079441] gpio gpiochip6: Static allocation of GPIO base is deprecated,
> use dynami c allocation.
> [    0.083631] SCSI subsystem initialized
> [    0.084119] usbcore: registered new interface driver usbfs
> [    0.084160] usbcore: registered new interface driver hub
> [    0.084205] usbcore: registered new device driver usb
> [    0.086993] pca953x 0-0020: supply vcc not found, using dummy regulator
> [    0.087157] pca953x 0-0020: using no AI
> [    0.100030] pca953x 0-0020: interrupt support not compiled in
> [    0.120764] pca953x 0-0021: supply vcc not found, using dummy regulator
> [    0.120904] pca953x 0-0021: using no AI
> [    0.160606] pca953x 0-0022: supply vcc not found, using dummy regulator
> [    0.160732] pca953x 0-0022: using no AI
> [    0.200704] i2c i2c-0: IMX I2C adapter registered
> [    0.201717] i2c i2c-1: IMX I2C adapter registered
> [    0.201937] mc: Linux media interface: v0.10
> [    0.202003] videodev: Linux video capture interface: v2.00
> [    0.202117] pps_core: LinuxPPS API ver. 1 registered
> [    0.202124] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
> Giometti <gi ometti@...ux.it>
> [    0.202151] PTP clock support registered
> [    0.202996] Advanced Linux Sound Architecture Driver Initialized.
> [    0.203875] Bluetooth: Core ver 2.22
> [    0.203918] NET: Registered PF_BLUETOOTH protocol family
> [    0.203924] Bluetooth: HCI device and connection manager initialized
> [    0.203937] Bluetooth: HCI socket layer initialized
> [    0.203946] Bluetooth: L2CAP socket layer initialized
> [    0.203965] Bluetooth: SCO socket layer initialized
> [    0.204470] vgaarb: loaded
> [    0.204864] clocksource: Switched to clocksource mxc_timer1
> [    0.205119] VFS: Disk quotas dquot_6.6.0
> [    0.205178] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes) [    0.215795] NET: Registered PF_INET protocol family
> [    0.216223] IP idents hash table entries: 16384 (order: 5, 131072 bytes,
> linear) [    0.218261] tcp_listen_portaddr_hash hash table entries: 512
> (order: 0, 4096 bytes, linear)
> [    0.218290] Table-perturb hash table entries: 65536 (order: 6, 262144
> bytes, linear) [    0.218304] TCP established hash table entries: 8192
> (order: 3, 32768 bytes, linear) [    0.218393] TCP bind hash table entries:
> 8192 (order: 5, 131072 bytes, linear) [    0.218680] TCP: Hash tables
> configured (established 8192 bind 8192) [    0.218891] UDP hash table
> entries: 512 (order: 2, 16384 bytes, linear) [    0.218944] UDP-Lite hash
> table entries: 512 (order: 2, 16384 bytes, linear) [    0.219141] NET:
> Registered PF_UNIX/PF_LOCAL protocol family
> [    0.219687] RPC: Registered named UNIX socket transport module.
> [    0.219697] RPC: Registered udp transport module.
> [    0.219703] RPC: Registered tcp transport module.
> [    0.219708] RPC: Registered tcp-with-tls transport module.
> [    0.219713] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [    0.221148] PCI: CLS 0 bytes, default 64
> [    0.221977] armv7-pmu soc:pmu: hw perfevents: no interrupt-affinity
> property, guessi ng.
> [    0.222197] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7
> counters avail able
> [    0.223895] Initialise system trusted keyrings
> [    0.224175] workingset: timestamp_bits=30 max_order=18 bucket_order=0
> [    0.224818] NFS: Registering the id_resolver key type
> [    0.224899] Key type id_resolver registered
> [    0.224907] Key type id_legacy registered
> [    0.224937] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
> [    0.224946] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
> Registering... [    0.224982] jffs2: version 2.2. (NAND) © 2001-2006 Red
> Hat, Inc. [    0.225263] fuse: init (API version 7.38)
> [    0.366002] Key type asymmetric registered
> [    0.366012] Asymmetric key parser 'x509' registered
> [    0.366111] bounce: pool size: 64 pages
> [    0.366141] io scheduler mq-deadline registered
> [    0.366149] io scheduler kyber registered
> [    0.366177] io scheduler bfq registered
> [    0.374797] mxs-dma 110000.dma-apbh: initialized
> [    0.380411] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 267,
> base_baud = 500000 0) is a IMX
> [    0.380466] pfuze100-regulator 0-0008: Full layer: 2, Metal layer: 1
> [    0.380517] printk: console [ttymxc1] enabled
> [    0.420856] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
> [    0.426703] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 268,
> base_baud = 500000 0) is a IMX
> [    0.429991] pfuze100-regulator 0-0008: pfuze100 found.
> [    1.415972] dwhdmi-imx 120000.hdmi: Detected HDMI TX controller v1.30a
> with HDCP (DW C HDMI 3D TX PHY)
> [    1.438220] etnaviv etnaviv: bound 130000.gpu (ops 0xc0eaa4c0)
> [    1.444322] etnaviv etnaviv: bound 134000.gpu (ops 0xc0eaa4c0)
> [    1.450446] etnaviv etnaviv: bound 2204000.gpu (ops 0xc0eaa4c0)
> [    1.456412] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
> [    1.462736] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
> [    1.468843] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
> [    1.474978] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
> [    1.481750] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor
> 0 [    1.490567] imx-ipuv3 2400000.ipu: IPUv3H probed
> [    1.497417] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops
> 0xc0e990bc) [    1.504784] imx-drm display-subsystem: bound
> imx-ipuv3-crtc.3 (ops 0xc0e990bc) [    1.512221] imx-drm display-subsystem:
> bound imx-ipuv3-crtc.6 (ops 0xc0e990bc) [    1.519601] imx-drm
> display-subsystem: bound imx-ipuv3-crtc.7 (ops 0xc0e990bc) [    1.526929]
> imx-drm display-subsystem: bound 120000.hdmi (ops 0xc0e99bb0) [   
> 1.533801] imx-drm display-subsystem: bound 2000000.aips-bus:ldb (ops
> 0xc0e9985c) [    1.542009] [drm] Initialized imx-drm 1.0.0 20120507 for
> display-subsystem on minor 1
> [    1.617102] Console: switching to colour frame buffer device 128x48
> [    1.639863] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame
> buffer device [    1.647569] imx-ipuv3 2800000.ipu: IPUv3H probed
> [    1.664218] brd: module loaded
> [    1.675094] loop: module loaded
> [    1.678559] at24 0-0050: supply vcc not found, using dummy regulator
> [    1.686264] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
> [    1.693254] at24 0-005e: supply vcc not found, using dummy regulator [  
>  1.700649] at24 0-005e: 6 byte 24mac402 EEPROM, read-only
> [    1.707334] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified,
> using 000000 24
> [    1.715309] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified,
> using 00000 480
> [    1.723325] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not
> specified, using 000 02000
> [    1.731527] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified,
> using 05000000 [    1.739323] ahci-imx 2200000.sata: supply ahci not found,
> using dummy regulator [    1.746879] ahci-imx 2200000.sata: supply phy not
> found, using dummy regulator [    1.754171] ahci-imx 2200000.sata: supply
> target not found, using dummy regulator [    1.765103] ahci-imx
> 2200000.sata: SSS flag set, parallel bus scan disabled [    1.772093]
> ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl p
> latform mode
> [    1.780930] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only
> pmp pio slum part ccc apst
> [    1.791631] scsi host0: ahci-imx
> [    1.795182] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port
> 0x100 irq 281
> [    1.807887] CAN device driver interface
> [    1.815291] pps pps0: new PPS source ptp0
> [    1.824500] fec 2188000.ethernet eth0: registered PHC device 0
> [    1.830997] usbcore: registered new device driver r8152-cfgselector
> [    1.837331] usbcore: registered new interface driver r8152
> [    1.842875] usbcore: registered new interface driver lan78xx
> [    1.848605] usbcore: registered new interface driver asix
> [    1.854042] usbcore: registered new interface driver ax88179_178a
> [    1.860192] usbcore: registered new interface driver cdc_ether
> [    1.866080] usbcore: registered new interface driver smsc95xx
> [    1.871862] usbcore: registered new interface driver net1080
> [    1.877579] usbcore: registered new interface driver cdc_subset
> [    1.883536] usbcore: registered new interface driver zaurus
> [    1.889163] usbcore: registered new interface driver MOSCHIP usb-ethernet
> driver [    1.896643] usbcore: registered new interface driver cdc_ncm
> [    1.902339] usbcore: registered new interface driver r8153_ecm
> [    1.908265] usbcore: registered new interface driver usb-storage
> [    1.915845] imx_usb 2184000.usb: No over current polarity defined
> [    1.925481] ci_hdrc ci_hdrc.0: EHCI Host Controller
> [    1.930395] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus
> number 1 [    1.964891] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
> [    1.970466] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002, bcdDevice = 6.05
> [    1.978770] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1 [    1.986022] usb usb1: Product: EHCI Host Controller
> [    1.990909] usb usb1: Manufacturer: Linux 6.5.0 ehci_hcd
> [    1.996243] usb usb1: SerialNumber: ci_hdrc.0
> [    2.001210] hub 1-0:1.0: USB hub found
> [    2.005040] hub 1-0:1.0: 1 port detected
> [    2.013077] ci_hdrc ci_hdrc.1: EHCI Host Controller
> [    2.018008] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus
> number 2 [    2.054882] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
> [    2.060434] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002, bcdDevice = 6.05
> [    2.068736] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1 [    2.075993] usb usb2: Product: EHCI Host Controller
> [    2.080880] usb usb2: Manufacturer: Linux 6.5.0 ehci_hcd
> [    2.086215] usb usb2: SerialNumber: ci_hdrc.1
> [    2.091157] hub 2-0:1.0: USB hub found
> [    2.094973] hub 2-0:1.0: 1 port detected
> [    2.100576] SPI driver ads7846 has no spi_device_id for ti,tsc2046
> [    2.106788] SPI driver ads7846 has no spi_device_id for ti,ads7843
> [    2.112974] SPI driver ads7846 has no spi_device_id for ti,ads7845
> [    2.119173] SPI driver ads7846 has no spi_device_id for ti,ads7873
> [    2.126405] ata1: SATA link down (SStatus 0 SControl 300)
> [    2.128977] rtc-ds1307 0-0068: SET TIME!
> [    2.131859] ahci-imx 2200000.sata: no device found, disabling link.
> [    2.138861] rtc-ds1307 0-0068: registered as rtc0
> [    2.142031] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable
> hotplug [    2.148304] rtc-ds1307 0-0068: setting system clock to
> 2000-01-01T00:00:16 UTC (9466 84816)
> [    2.164313] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc1
> [    2.170598] i2c_dev: i2c /dev entries driver
> [    2.179371] Bluetooth: HCI UART driver ver 2.3
> [    2.183827] Bluetooth: HCI UART protocol H4 registered
> [    2.189030] Bluetooth: HCI UART protocol LL registered
> [    2.195090] sdhci: Secure Digital Host Controller Interface driver
> [    2.201278] sdhci: Copyright(c) Pierre Ossman
> [    2.205665] sdhci-pltfm: SDHCI platform and OF driver helper
> [    2.212740] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
> [    2.213147] caam 2100000.caam: Entropy delay = 3200
> [    2.217980] sdhci-esdhc-imx 2194000.usdhc: Got WP GPIO
> [    2.235314] caam 2100000.caam: Instantiated RNG4 SH0
> [    2.247792] caam 2100000.caam: Instantiated RNG4 SH1
> [    2.252993] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
> [    2.254409] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using
> ADMA [    2.259488] caam 2100000.caam: job rings = 2, qi = 0
> [    2.274830] caam algorithms registered in /proc/crypto
> [    2.280160] caam 2100000.caam: registering rng-caam
> [    2.284350] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using
> ADMA [    2.285314] caam 2100000.caam: rng crypto API alg registered
> prng-caam [    2.297630] random: crng init done
> [    2.303285] usbcore: registered new interface driver usbhid
> [    2.308911] usbhid: USB HID core driver
> [    2.313588] imx-ipuv3-csi imx-ipuv3-csi.0: Registered ipu1_csi0 capture
> as /dev/vide o0
> [    2.320064] mmc0: new DDR MMC card at address 0001
> [    2.321564] usb 1-1: new high-speed USB device number 2 using ci_hdrc
> [    2.326456] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpenc capture as
> /dev/video1 [    2.333527] mmcblk0: mmc0:0001 Q2J54A 3.64 GiB
> [    2.340788] mmc1: new high speed SDHC card at address 1234
> [    2.344970] imx-ipuv3 2400000.ipu: Registered ipu1_ic_prpvf capture as
> /dev/video2 [    2.345512] imx-ipuv3-csi imx-ipuv3-csi.1: Registered
> ipu1_csi1 capture as /dev/vide o3
> [    2.351359] mmcblk1: mmc1:1234 SA32G 28.8 GiB
> [    2.358940] imx-ipuv3-csi imx-ipuv3-csi.4: Registered ipu2_csi0 capture
> as /dev/vide o4
> [    2.359085] mmcblk0boot0: mmc0:0001 Q2J54A 2.00 MiB
> [    2.361287] mmcblk0boot1: mmc0:0001 Q2J54A 2.00 MiB
> [    2.363107] mmcblk0rpmb: mmc0:0001 Q2J54A 512 KiB, chardev (243:0)
> [    2.394649]  mmcblk1: p1 p2 p3
> [    2.394924] usb 2-1: new high-speed USB device number 2 using ci_hdrc
> [    2.394948] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpenc capture as
> /dev/video5 [    2.397988] imx-ipuv3 2800000.ipu: Registered ipu2_ic_prpvf
> capture as /dev/video6 [    2.419931] imx-ipuv3-csi imx-ipuv3-csi.5:
> Registered ipu2_csi1 capture as /dev/vide o7
> [    2.436511] NET: Registered PF_INET6 protocol family
> [    2.442621] Segment Routing with IPv6
> [    2.446385] In-situ OAM (IOAM) with IPv6
> [    2.450396] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> [    2.457018] NET: Registered PF_PACKET protocol family
> [    2.462109] can: controller area network core
> [    2.466561] NET: Registered PF_CAN protocol family
> [    2.471387] can: raw protocol
> [    2.474365] can: broadcast manager protocol
> [    2.478607] can: netlink gateway - max_hops=1
> [    2.483072] Key type dns_resolver registered
> [    2.489383] Registering SWP/SWPB emulation handler
> [    2.504238] Loading compiled-in X.509 certificates
> [    2.539840] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: Consider updating
> driver vid eo-mux to match on endpoints
> [    2.550967] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: Consider updating
> driver vid eo-mux to match on endpoints
> [    2.555909] usb 1-1: New USB device found, idVendor=0bda, idProduct=8179,
> bcdDevice= 0.00
> [    2.563328] imx-media: Registered ipu_ic_pp csc/scaler as /dev/video8
> [    2.569363] usb 1-1: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3 [    2.576973] imx_thermal 2000000.aips-bus:tempmon:
> Industrial CPU temperature grade - max:105C critical:100C passive:95C
> [    2.582980] usb 1-1: Product: 802.11n NIC
> [    2.597803] usb 1-1: Manufacturer: Realtek
> [    2.601909] usb 1-1: SerialNumber: 00E04C0001
> [    2.610341] cfg80211: Loading compiled-in X.509 certificates for
> regulatory database [    2.621866] Loaded X.509 cert 'sforshee:
> 00b28ddf47aef9cea7'
> [    2.627617] clk: Disabling unused clocks
> [    2.631928] platform regulatory.0: Direct firmware load for regulatory.db
> failed wit h error -2
> [    2.634899] ALSA device list:
> [    2.640606] cfg80211: failed to load regulatory.db
> [    2.643524]   No soundcards found.
> [    2.648408] usb 2-1: New USB device found, idVendor=0424, idProduct=2517,
> bcdDevice= 0.02
> [    2.660001] usb 2-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0 [    2.667658] hub 2-1:1.0: USB hub found
> [    2.671598] hub 2-1:1.0: 7 ports detected
> [    2.700941] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly
> filesystem [    2.708329] EXT4-fs (mmcblk1p2): write access will be enabled
> during recovery [    2.994978] usb 2-1.1: new high-speed USB device number
> 3 using ci_hdrc [    3.145639] usb 2-1.1: New USB device found,
> idVendor=0424, idProduct=9e00, bcdDevic e= 3.00
> [    3.154030] usb 2-1.1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0 [    3.164547] smsc95xx v2.0.0
> [    3.289135] SMSC LAN8710/LAN8720 usb-002:003:01: attached PHY driver
> (mii_bus:phy_ad dr=usb-002:003:01, irq=294)
> [    3.300938] smsc95xx 2-1.1:1.0 eth1: register 'smsc95xx' at
> usb-ci_hdrc.1-1.1, smsc9 5xx USB 2.0 Ethernet, f2:f7:83:3c:d3:e8
> [    3.766601] EXT4-fs (mmcblk1p2): recovery complete
> [    4.017039] EXT4-fs (mmcblk1p2): mounted filesystem
> 1c93b4dc-44a6-4b43-93b0-ce3b0bbd 0391 ro with ordered data mode. Quota
> mode: none.
> [    4.029221] VFS: Mounted root (ext4 filesystem) readonly on device
> 179:10. [    4.037240] devtmpfs: mounted
> [    4.042698] Freeing unused kernel image (initmem) memory: 1024K
> [    4.049122] Run /sbin/init as init process
> [    4.330114] EXT4-fs (mmcblk1p2): re-mounted
> 1c93b4dc-44a6-4b43-93b0-ce3b0bbd0391 r/w . Quota mode: none.
> Starting psplash: OK
> Starting syslogd: OK
> Starting klogd: OK
> Running sysctl: OK
> Populating /dev using udev:
> [    4.650852] udevd[134]: starting version 3.2.9
> [    4.692906] udevd[135]: starting eudev-3.2.9
> done
> Starting watchdog...
> Initializing random number generator: OK
> Saving random seed: OK
> Starting usbguard daemon: OK
> Starting rngd: OK
> Starting system message bus: done
> Starting network:
> [    6.261676] Micrel KSZ9031 Gigabit PHY 2188000.ethernet-1:03: attached
> PHY driver (mii_bus:phy_addr=2188000.ethernet-1:03, irq=56) OK
> Starting chrony: OK
> Starting php-fpm  done
> Starting nginx...
> Starting sshd: OK
> Touchscreen Firmware
> Tool version:   v0.29_20170705
> APILIB version: v1.0.62.0705
> Try to start Stephanie 5 GUI
> login:
> [    8.500637] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow
> control rx/tx [    8.533754] fec 2188000.ethernet eth0: Link is Down
> [   11.147566] fec 2188000.ethernet eth0: Link is Up - 100Mbps/Full - flow
> control rx/t x
> [   12.646102] platform 2008000.ecspi: deferred probe pending
> root
> Password:
> #
> # ip link set dev eth0 up
> # ip addr add 192.168.1.2/24 dev eth0
> ip: RTNETLINK answers: File exists
> # iperf3 -c 192.168.1.1


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ