| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231023-marvell-88e6152-wan-led-v5-3-0e82952015a7@linaro.org>
Date: Mon, 23 Oct 2023 09:18:54 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Russell King <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>
Cc: Christian Marangi <ansuelsmth@...il.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH net-next v5 3/7] ARM: dts: marvell: Fix some common switch
mistakes
Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be ethernet-switch@0.
- The ports node should be named ethernet-ports
- The ethernet-ports node should have port@0 etc children, no
plural "ports" in the children.
- Ports should be named ethernet-port@0 etc
- PHYs should be named ethernet-phy@0 etc
This serves as an example of fixes needed for introducing a
schema for the bindings, but the patch can simply be applied.
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
arch/arm/boot/dts/marvell/armada-370-rd.dts | 24 ++++++------
.../dts/marvell/armada-381-netgear-gs110emx.dts | 44 +++++++++++-----------
.../dts/marvell/armada-385-clearfog-gtr-l8.dts | 38 +++++++++----------
.../dts/marvell/armada-385-clearfog-gtr-s4.dts | 22 +++++------
arch/arm/boot/dts/marvell/armada-385-linksys.dtsi | 18 ++++-----
.../boot/dts/marvell/armada-385-turris-omnia.dts | 20 +++++-----
arch/arm/boot/dts/marvell/armada-388-clearfog.dts | 20 +++++-----
.../boot/dts/marvell/armada-xp-linksys-mamba.dts | 18 ++++-----
8 files changed, 96 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts
index b459a670f615..1b241da11e94 100644
--- a/arch/arm/boot/dts/marvell/armada-370-rd.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts
@@ -149,39 +149,37 @@ led@0 {
};
};
- switch: switch@10 {
+ switch: ethernet-switch@10 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0x10>;
interrupt-controller;
#interrupt-cells = <2>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
@@ -196,25 +194,25 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switchphy0: switchphy@0 {
+ switchphy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy1: switchphy@1 {
+ switchphy1: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy2: switchphy@2 {
+ switchphy2: ethernet-phy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
- switchphy3: switchphy@3 {
+ switchphy3: ethernet-phy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
index f4c4b213ef4e..5baf83e5253d 100644
--- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts
@@ -77,51 +77,49 @@ &mdio {
pinctrl-0 = <&mdio_pins>;
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6190";
- #address-cells = <1>;
#interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio1>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&switch_interrupt_pins>;
pinctrl-names = "default";
- #size-cells = <0>;
reg = <0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy1: switch0phy1@1 {
+ switch0phy1: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy2: switch0phy2@2 {
+ switch0phy2: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy3: switch0phy3@3 {
+ switch0phy3: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy4: switch0phy4@4 {
+ switch0phy4: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy5: switch0phy5@5 {
+ switch0phy5: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy6: switch0phy6@6 {
+ switch0phy6: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy7: switch0phy7@7 {
+ switch0phy7: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy8: switch0phy8@8 {
+ switch0phy8: ethernet-phy@8 {
reg = <0x8>;
};
};
@@ -142,11 +140,11 @@ phy2: ethernet-phy@c {
};
};
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
ethernet = <ð0>;
phy-mode = "rgmii";
reg = <0>;
@@ -158,55 +156,55 @@ fixed-link {
};
};
- port@1 {
+ ethernet-port@1 {
label = "lan1";
phy-handle = <&switch0phy1>;
reg = <1>;
};
- port@2 {
+ ethernet-port@2 {
label = "lan2";
phy-handle = <&switch0phy2>;
reg = <2>;
};
- port@3 {
+ ethernet-port@3 {
label = "lan3";
phy-handle = <&switch0phy3>;
reg = <3>;
};
- port@4 {
+ ethernet-port@4 {
label = "lan4";
phy-handle = <&switch0phy4>;
reg = <4>;
};
- port@5 {
+ ethernet-port@5 {
label = "lan5";
phy-handle = <&switch0phy5>;
reg = <5>;
};
- port@6 {
+ ethernet-port@6 {
label = "lan6";
phy-handle = <&switch0phy6>;
reg = <6>;
};
- port@7 {
+ ethernet-port@7 {
label = "lan7";
phy-handle = <&switch0phy7>;
reg = <7>;
};
- port@8 {
+ ethernet-port@8 {
label = "lan8";
phy-handle = <&switch0phy8>;
reg = <8>;
};
- port@9 {
+ ethernet-port@9 {
/* 88X3310P external phy */
label = "lan9";
phy-handle = <&phy1>;
@@ -214,7 +212,7 @@ port@9 {
reg = <9>;
};
- port@a {
+ ethernet-port@a {
/* 88X3310P external phy */
label = "lan10";
phy-handle = <&phy2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1990f7d0cc79..1707d1b01545 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -7,66 +7,66 @@ / {
};
&mdio {
- switch0: switch0@4 {
+ switch0: ethernet-switch@4 {
compatible = "marvell,mv88e6190";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan8";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan7";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan6";
phy-handle = <&switch0phy2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan5";
phy-handle = <&switch0phy3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
label = "lan4";
phy-handle = <&switch0phy4>;
};
- port@6 {
+ ethernet-port@6 {
reg = <6>;
label = "lan3";
phy-handle = <&switch0phy5>;
};
- port@7 {
+ ethernet-port@7 {
reg = <7>;
label = "lan2";
phy-handle = <&switch0phy6>;
};
- port@8 {
+ ethernet-port@8 {
reg = <8>;
label = "lan1";
phy-handle = <&switch0phy7>;
};
- port@10 {
+ ethernet-port@10 {
reg = <10>;
phy-mode = "2500base-x";
@@ -83,35 +83,35 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@1 {
+ switch0phy0: ethernet-phy@1 {
reg = <0x1>;
};
- switch0phy1: switch0phy1@2 {
+ switch0phy1: ethernet-phy@2 {
reg = <0x2>;
};
- switch0phy2: switch0phy2@3 {
+ switch0phy2: ethernet-phy@3 {
reg = <0x3>;
};
- switch0phy3: switch0phy3@4 {
+ switch0phy3: ethernet-phy@4 {
reg = <0x4>;
};
- switch0phy4: switch0phy4@5 {
+ switch0phy4: ethernet-phy@5 {
reg = <0x5>;
};
- switch0phy5: switch0phy5@6 {
+ switch0phy5: ethernet-phy@6 {
reg = <0x6>;
};
- switch0phy6: switch0phy6@7 {
+ switch0phy6: ethernet-phy@7 {
reg = <0x7>;
};
- switch0phy7: switch0phy7@8 {
+ switch0phy7: ethernet-phy@8 {
reg = <0x8>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index b795ad573891..a7678a784c18 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -11,42 +11,42 @@ &sfp0 {
};
&mdio {
- switch0: switch0@4 {
+ switch0: ethernet-switch@4 {
compatible = "marvell,mv88e6085";
reg = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_switch_reset_pins>;
reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan2";
phy-handle = <&switch0phy0>;
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan1";
phy-handle = <&switch0phy1>;
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan4";
phy-handle = <&switch0phy2>;
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan3";
phy-handle = <&switch0phy3>;
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "2500base-x";
ethernet = <ð1>;
@@ -63,19 +63,19 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
- switch0phy0: switch0phy0@11 {
+ switch0phy0: ethernet-phy@11 {
reg = <0x11>;
};
- switch0phy1: switch0phy1@12 {
+ switch0phy1: ethernet-phy@12 {
reg = <0x12>;
};
- switch0phy2: switch0phy2@13 {
+ switch0phy2: ethernet-phy@13 {
reg = <0x13>;
};
- switch0phy3: switch0phy3@14 {
+ switch0phy3: ethernet-phy@14 {
reg = <0x14>;
};
};
diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
index fc8216fd9f60..4116ed60f709 100644
--- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi
@@ -158,42 +158,40 @@ nand: nand@0 {
&mdio {
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "wan";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "sgmii";
ethernet = <ð2>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7b755bb4e4e7 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -435,12 +435,10 @@ phy1: ethernet-phy@1 {
};
/* Switch MV88E6176 at address 0x10 */
- switch@10 {
+ ethernet-switch@10 {
pinctrl-names = "default";
pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
dsa,member = <0 0>;
reg = <0x10>;
@@ -448,36 +446,36 @@ switch@10 {
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- ports@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan0";
};
- ports@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan1";
};
- ports@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- ports@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan3";
};
- ports@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan4";
};
- ports@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "rgmii-id";
@@ -488,7 +486,7 @@ fixed-link {
};
};
- ports@6 {
+ ethernet-port@6 {
reg = <6>;
ethernet = <ð0>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 32c569df142f..3290ccad2374 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -92,44 +92,42 @@ pcie2-0-w-disable-hog {
&mdio {
status = "okay";
- switch@4 {
+ ethernet-switch@4 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <4>;
pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
pinctrl-names = "default";
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan5";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan4";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan3";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan2";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "lan1";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
ethernet = <ð1>;
phy-mode = "1000base-x";
@@ -140,7 +138,7 @@ fixed-link {
};
};
- port@6 {
+ ethernet-port@6 {
/* 88E1512 external phy */
reg = <6>;
label = "lan6";
diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..ea859f7ea042 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -265,42 +265,40 @@ flash@0 {
&mdio {
status = "okay";
- switch@0 {
+ ethernet-switch@0 {
compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- ports {
+ ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
+ ethernet-port@0 {
reg = <0>;
label = "lan4";
};
- port@1 {
+ ethernet-port@1 {
reg = <1>;
label = "lan3";
};
- port@2 {
+ ethernet-port@2 {
reg = <2>;
label = "lan2";
};
- port@3 {
+ ethernet-port@3 {
reg = <3>;
label = "lan1";
};
- port@4 {
+ ethernet-port@4 {
reg = <4>;
label = "internet";
};
- port@5 {
+ ethernet-port@5 {
reg = <5>;
phy-mode = "rgmii-id";
ethernet = <ð0>;
--
2.34.1
Powered by blists - more mailing lists