[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231025173300.1776832-5-florian.fainelli@broadcom.com>
Date: Wed, 25 Oct 2023 10:32:59 -0700
From: Florian Fainelli <florian.fainelli@...adcom.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
Doug Berger <opendmb@...il.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Vladimir Oltean <vladimir.oltean@....com>,
Tariq Toukan <tariqt@...dia.com>,
Gal Pressman <gal@...dia.com>,
Willem de Bruijn <willemb@...gle.com>,
Daniil Tatianin <d-tatianin@...dex-team.ru>,
Simon Horman <horms@...nel.org>,
Justin Chen <justin.chen@...adcom.com>,
Ratheesh Kannoth <rkannoth@...vell.com>,
Joe Damato <jdamato@...tly.com>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>,
Jiri Pirko <jiri@...nulli.us>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next 4/5] net: phy: broadcom: Add support for WAKE_FILTER
Since the PHY is capable of matching any arbitrary Ethernet MAC
destination as a programmable wake-up pattern, add support for doing
that using the WAKE_FILTER and ethtool::rxnfc API. For instance, in
order to wake-up from the Ethernet MAC address corresponding to the IPv4
multicast IP address of 224.0.0.251 (e.g.: multicast DNS), one could do:
ethtool -N eth0 flow-type ether dst 01:00:5e:00:00:fb loc 0 action -2
ethtool -n eth0
Total 1 rules
Filter: 0
Flow Type: Raw Ethernet
Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
Dest MAC addr: 01:00:5E:00:00:FB mask: 00:00:00:00:00:00
Ethertype: 0x0 mask: 0xFFFF
Action: Wake-on-LAN
ethtool -s eth0 wol f
Signed-off-by: Florian Fainelli <florian.fainelli@...adcom.com>
---
drivers/net/phy/bcm-phy-lib.c | 195 +++++++++++++++++++++++++++++++++-
drivers/net/phy/bcm-phy-lib.h | 5 +
drivers/net/phy/broadcom.c | 2 +
3 files changed, 201 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index 876f28fd8256..cfbeedc5ee81 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -827,7 +827,8 @@ EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
WAKE_MCAST | \
WAKE_BCAST | \
WAKE_MAGIC | \
- WAKE_MAGICSECURE)
+ WAKE_MAGICSECURE | \
+ WAKE_FILTER)
int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
@@ -881,6 +882,12 @@ int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
ctl &= ~BCM54XX_WOL_DIR_PKT_EN;
ctl &= ~(BCM54XX_WOL_SECKEY_OPT_MASK << BCM54XX_WOL_SECKEY_OPT_SHIFT);
+ /* For WAKE_FILTER, we have already programmed the desired MAC DA
+ * and associated mask by the time we get there.
+ */
+ if (wol->wolopts & WAKE_FILTER)
+ goto program_ctl;
+
/* When using WAKE_MAGIC, we program the magic pattern filter to match
* the device's MAC address and we accept any MAC DA in the Ethernet
* frame.
@@ -935,6 +942,7 @@ int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
return ret;
}
+program_ctl:
if (wol->wolopts & WAKE_MAGICSECURE) {
ctl |= BCM54XX_WOL_SECKEY_OPT_6B <<
BCM54XX_WOL_SECKEY_OPT_SHIFT;
@@ -999,6 +1007,16 @@ void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
if (!(ctl & BCM54XX_WOL_EN))
return;
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_SEC_KEY_8B);
+ if (ret < 0)
+ return;
+
+ /* Mutualy exclusive with other modes */
+ if (ret) {
+ wol->wolopts |= WAKE_FILTER;
+ return;
+ }
+
for (i = 0; i < sizeof(da) / 2; i++) {
ret = bcm_phy_read_exp(phydev,
BCM54XX_WOL_MPD_DATA2(2 - i));
@@ -1066,6 +1084,181 @@ int bcm_phy_led_brightness_set(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(bcm_phy_led_brightness_set);
+static int bcm_phy_get_rule(struct phy_device *phydev,
+ struct ethtool_rxnfc *nfc,
+ int loc)
+{
+ u8 da[ETH_ALEN];
+ unsigned int i;
+ int ret;
+
+ if (loc != 0)
+ return -EINVAL;
+
+ memset(nfc, 0, sizeof(*nfc));
+ nfc->flow_type = ETHER_FLOW;
+ nfc->fs.flow_type = ETHER_FLOW;
+
+ for (i = 0; i < sizeof(da) / 2; i++) {
+ ret = bcm_phy_read_exp(phydev,
+ BCM54XX_WOL_MPD_DATA2(2 - i));
+ if (ret < 0)
+ return ret;
+
+ da[i * 2] = ret >> 8;
+ da[i * 2 + 1] = ret & 0xff;
+ }
+ ether_addr_copy(nfc->fs.h_u.ether_spec.h_dest, da);
+
+ for (i = 0; i < sizeof(da) / 2; i++) {
+ ret = bcm_phy_read_exp(phydev,
+ BCM54XX_WOL_MASK(2 - i));
+ if (ret < 0)
+ return ret;
+
+ da[i * 2] = ~(ret >> 8);
+ da[i * 2 + 1] = ~(ret & 0xff);
+ }
+ ether_addr_copy(nfc->fs.m_u.ether_spec.h_dest, da);
+
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INNER_PROTO);
+ if (ret < 0)
+ return ret;
+
+ nfc->fs.h_u.ether_spec.h_proto = be16_to_cpu(ret);
+
+ nfc->fs.ring_cookie = RX_CLS_FLOW_WAKE;
+ nfc->fs.location = 0;
+
+ return 0;
+}
+
+static int bcm_phy_set_rule(struct phy_device *phydev,
+ struct ethtool_rxnfc *nfc)
+{
+ int ret = -EOPNOTSUPP;
+ unsigned int i;
+ __be16 h_proto;
+ const u8 *da;
+
+ /* We support only matching on the MAC DA with a custom mask and
+ * optionally with a specific Ethernet type, reject anything else.
+ */
+ if (nfc->fs.ring_cookie != RX_CLS_FLOW_WAKE ||
+ (nfc->fs.location != 0 &&
+ nfc->fs.location != RX_CLS_LOC_ANY &&
+ nfc->fs.location != RX_CLS_LOC_FIRST) ||
+ nfc->fs.flow_type != ETHER_FLOW ||
+ !is_zero_ether_addr(nfc->fs.h_u.ether_spec.h_source) ||
+ !is_zero_ether_addr(nfc->fs.m_u.ether_spec.h_source))
+ return ret;
+
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_SEC_KEY_8B);
+ if (ret < 0)
+ return ret;
+
+ if (ret)
+ return -EBUSY;
+
+ if (nfc->fs.location == RX_CLS_LOC_ANY ||
+ nfc->fs.location == RX_CLS_LOC_FIRST)
+ nfc->fs.location = 0;
+
+ da = nfc->fs.h_u.ether_spec.h_dest;
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ ret = bcm_phy_write_exp(phydev,
+ BCM54XX_WOL_MPD_DATA2(2 - i),
+ da[i * 2] << 8 | da[i * 2 + 1]);
+ if (ret < 0)
+ return ret;
+ }
+
+ da = nfc->fs.m_u.ether_spec.h_dest;
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ ret = bcm_phy_write_exp(phydev,
+ BCM54XX_WOL_MASK(2 - i),
+ da[i * 2] << 8 | da[i * 2 + 1]);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Restore default inner protocol field unless overridden by the flow
+ * specification.
+ */
+ h_proto = be16_to_cpu(nfc->fs.h_u.ether_spec.h_proto);
+ if (!h_proto)
+ h_proto = ETH_P_8021Q;
+
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INNER_PROTO,
+ h_proto);
+ if (ret)
+ return ret;
+
+ /* Use BCM54XX_WOL_SEC_KEY_8B as a scratch register to record
+ * that we installed a filter rule.
+ */
+ return bcm_phy_write_exp(phydev, BCM54XX_WOL_SEC_KEY_8B, 1);
+}
+
+int bcm_phy_get_rxnfc(struct phy_device *phydev,
+ struct ethtool_rxnfc *cmd, u32 *rule_locs)
+{
+ int err = 0, rule_cnt = 0;
+
+ err = bcm_phy_read_exp(phydev, BCM54XX_WOL_SEC_KEY_8B);
+ if (err < 0)
+ return err;
+
+ rule_cnt = err;
+ err = 0;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXCLSRLCNT:
+ cmd->rule_cnt = rule_cnt;
+ cmd->data = 1 | RX_CLS_LOC_SPECIAL;
+ break;
+ case ETHTOOL_GRXCLSRULE:
+ err = bcm_phy_get_rule(phydev, cmd, cmd->fs.location);
+ break;
+ case ETHTOOL_GRXCLSRLALL:
+ if (rule_cnt)
+ rule_locs[0] = 0;
+ cmd->rule_cnt = rule_cnt;
+ cmd->data = 1;
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_rxnfc);
+
+int bcm_phy_set_rxnfc(struct phy_device *phydev,
+ struct ethtool_rxnfc *cmd)
+{
+ int err = 0;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_SRXCLSRLINS:
+ err = bcm_phy_set_rule(phydev, cmd);
+ break;
+ case ETHTOOL_SRXCLSRLDEL:
+ if (cmd->fs.location != 0)
+ return err;
+
+ err = bcm_phy_write_exp(phydev, BCM54XX_WOL_SEC_KEY_8B, 0);
+ break;
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_set_rxnfc);
+
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index b52189e45a84..7081edcec06b 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -121,4 +121,9 @@ irqreturn_t bcm_phy_wol_isr(int irq, void *dev_id);
int bcm_phy_led_brightness_set(struct phy_device *phydev,
u8 index, enum led_brightness value);
+int bcm_phy_get_rxnfc(struct phy_device *phydev,
+ struct ethtool_rxnfc *nfc, u32 *rule_locs);
+int bcm_phy_set_rxnfc(struct phy_device *phydev,
+ struct ethtool_rxnfc *nfc);
+
#endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3a627105675a..6c2212bd2779 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -1107,6 +1107,8 @@ static struct phy_driver broadcom_drivers[] = {
.get_wol = bcm54xx_phy_get_wol,
.set_wol = bcm54xx_phy_set_wol,
.led_brightness_set = bcm_phy_led_brightness_set,
+ .get_rxnfc = bcm_phy_get_rxnfc,
+ .set_rxnfc = bcm_phy_set_rxnfc,
}, {
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
--
2.34.1
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4221 bytes)
Powered by blists - more mailing lists