[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZTuk/OF01M24nBeG@shell.armlinux.org.uk>
Date: Fri, 27 Oct 2023 12:54:36 +0100
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Serge Semin <fancer.lancer@...il.com>
Cc: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>, netdev@...r.kernel.org,
davem@...emloft.net, kuba@...nel.org, linux-kernel@...r.kernel.org,
andrew@...n.ch, Jose.Abreu@...opsys.com,
UNGLinuxDriver@...rochip.com
Subject: Re: [PATCH net-next V3] net: pcs: xpcs: Add 2500BASE-X case in get
state for XPCS drivers
On Fri, Oct 27, 2023 at 02:04:15PM +0300, Serge Semin wrote:
> Cc += Russell
>
> * It's a good practice to add all the reviewers to Cc in the new patch
> * revisions.
>
> On Fri, Oct 27, 2023 at 10:13:06AM +0530, Raju Lakkaraju wrote:
> > Add DW_2500BASEX case in xpcs_get_state( ) to update speed, duplex and pause
> >
> > Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@...rochip.com>
>
> With a nitpick below clarified, feel free to add:
> Reviewed-by: Serge Semin <fancer.lancer@...il.com>
>
> > ---
> > drivers/net/pcs/pcs-xpcs.c | 29 +++++++++++++++++++++++++++++
> > drivers/net/pcs/pcs-xpcs.h | 2 ++
> > 2 files changed, 31 insertions(+)
> >
> > diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
> > index 4dbc21f604f2..31f0beba638a 100644
> > --- a/drivers/net/pcs/pcs-xpcs.c
> > +++ b/drivers/net/pcs/pcs-xpcs.c
> > @@ -1090,6 +1090,28 @@ static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
> > return 0;
> > }
> >
> > +static int xpcs_get_state_2500basex(struct dw_xpcs *xpcs,
> > + struct phylink_link_state *state)
> > +{
> > + int ret;
> > +
> > + ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_STS);
> > + if (ret < 0) {
> > + state->link = 0;
> > + return ret;
> > + }
> > +
> > + state->link = !!(ret & DW_VR_MII_MMD_STS_LINK_STS);
> > + if (!state->link)
> > + return 0;
> > +
> > + state->speed = SPEED_2500;
>
> > + state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
>
> Why is it '|=' instead of just '='? Is it possible to have the 'pause'
> field having some additional flags set which would be required to
> preserve?
The code is correct. There are other flags on state->pause other than
these, and phylink initialises state->pause prior to calling the
function. The only flags that should be modified here are these two
bits that the code is setting.
Phylink will initialise it to MLO_PAUSE_NONE if expecting autoneg, or
the configured values if autoneg on the link is disabled.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists