[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231029042712.520010-13-cristian.ciocaltea@collabora.com>
Date: Sun, 29 Oct 2023 06:27:12 +0200
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Emil Renner Berthing <kernel@...il.dk>,
Samin Guo <samin.guo@...rfivetech.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Richard Cochran <richardcochran@...il.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
kernel@...labora.com
Subject: [PATCH v2 12/12] [UNTESTED] riscv: dts: starfive: beaglev-starlight: Enable gmac
The BeagleV Starlight SBC uses a Microchip KSZ9031RNXCA PHY supporting
RGMII-ID.
TODO: Verify if manual adjustment of the RX internal delay is needed. If
yes, add the mdio & phy sub-nodes.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
index 7cda3a89020a..d3f4c99d98da 100644
--- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
+++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts
@@ -11,3 +11,8 @@ / {
model = "BeagleV Starlight Beta";
compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100";
};
+
+&gmac {
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
--
2.42.0
Powered by blists - more mailing lists