lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231030035550.2340514-1-0x1207@gmail.com> Date: Mon, 30 Oct 2023 11:55:50 +0800 From: Furong Xu <0x1207@...il.com> To: "David S. Miller" <davem@...emloft.net>, Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu <joabreu@...opsys.com>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Maxime Coquelin <mcoquelin.stm32@...il.com>, Joao Pinto <jpinto@...opsys.com>, Simon Horman <horms@...nel.org>, Jacob Keller <jacob.e.keller@...el.com>, Serge Semin <fancer.lancer@...il.com> Cc: netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, xfr@...look.com, rock.xu@....com, Furong Xu <0x1207@...il.com> Subject: [PATCH net-next v2] net: stmmac: xgmac: Enable support for multiple Flexible PPS outputs >From XGMAC Core 3.20 and later, each Flexible PPS has individual PPSEN bit to select Fixed mode or Flexible mode. The PPSEN must be set, or it stays in Fixed PPS mode by default. XGMAC Core prior 3.20, only PPSEN0(bit 4) is writable. PPSEN{1,2,3} are read-only reserved, and they are already in Flexible mode by default, our new code always set PPSEN{1,2,3} do not make things worse ;-) Signed-off-by: Furong Xu <0x1207@...il.com> --- Changes in v2: - Add comment for XGMAC_PPSEN description among different XGMAC core versions. - Update commit message, thanks Serge Semin and Jacob Keller for your advices. --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 +- .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 14 +++++++++++++- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h index 7a8f47e7b728..a4e8b498dea9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h @@ -259,7 +259,7 @@ ((val) << XGMAC_PPS_MINIDX(x)) #define XGMAC_PPSCMD_START 0x2 #define XGMAC_PPSCMD_STOP 0x5 -#define XGMAC_PPSEN0 BIT(4) +#define XGMAC_PPSENx(x) BIT(4 + (x) * 8) #define XGMAC_PPSx_TARGET_TIME_SEC(x) (0x00000d80 + (x) * 0x10) #define XGMAC_PPSx_TARGET_TIME_NSEC(x) (0x00000d84 + (x) * 0x10) #define XGMAC_TRGTBUSY0 BIT(31) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index f352be269deb..453e88b75be0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -1178,7 +1178,19 @@ static int dwxgmac2_flex_pps_config(void __iomem *ioaddr, int index, val |= XGMAC_PPSCMDx(index, XGMAC_PPSCMD_START); val |= XGMAC_TRGTMODSELx(index, XGMAC_PPSCMD_START); - val |= XGMAC_PPSEN0; + + /* XGMAC Core has 4 PPS outputs at most. + * + * Prior XGMAC Core 3.20, Fixed mode or Flexible mode are selectable for + * PPS0 only via PPSEN0. PPS{1,2,3} are in Flexible mode by default, + * and can not be switched to Fixed mode, since PPSEN{1,2,3} are + * read-only reserved to 0. + * But we always set PPSEN{1,2,3} do not make things worse ;-) + * + * From XGMAC Core 3.20 and later, PPSEN{0,1,2,3} are writable and must + * be set, or the PPS outputs stay in Fixed PPS mode by default. + */ + val |= XGMAC_PPSENx(index); writel(cfg->start.tv_sec, ioaddr + XGMAC_PPSx_TARGET_TIME_SEC(index)); -- 2.34.1
Powered by blists - more mailing lists