[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c67b0e57-b87b-45cd-b3fd-be11b0670b0d@lunn.ch>
Date: Tue, 31 Oct 2023 13:48:10 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Parthiban.Veerasooran@...rochip.com
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
corbet@....net, Steen.Hegelund@...rochip.com, rdunlap@...radead.org,
horms@...nel.org, casper.casan@...il.com, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, Horatiu.Vultur@...rochip.com,
Woojung.Huh@...rochip.com, Nicolas.Ferre@...rochip.com,
UNGLinuxDriver@...rochip.com, Thorsten.Kummermehr@...rochip.com
Subject: Re: [PATCH net-next v2 5/9] net: ethernet: oa_tc6: implement
internal PHY initialization
> >> + tc6->mdiobus = mdiobus_alloc();
> >> + if (!tc6->mdiobus) {
> >> + netdev_err(tc6->netdev, "MDIO bus alloc failed\n");
> >> + return -ENODEV;
> >> + }
> >> +
> >> + tc6->mdiobus->phy_mask = ~(u32)BIT(1);
> >
> > Does the standard define this ? BIT(1), not BIT(0)?
> Ok, I think here is a typo. Will correct it.
There is still the open question, does the standard define this? If
not, a vendor might decide to use some other address, not 0. So it
might be better to not set a mask and scan the whole bus.
phy_find_first() should then work, no matter what address it is using.
Andrew
Powered by blists - more mailing lists