Message-ID: <da4409f3-d509-413b-8433-f222acbbb1be@gmail.com>
Date: Sat, 4 Nov 2023 23:37:29 +0100
From: Heiner Kallweit <hkallweit1@...il.com>
To: Mirsad Goran Todorovac <mirsad.todorovac@....unizg.hr>,
 linux-kernel@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, netdev@...r.kernel.org, nic_swsd@...ltek.com
Subject: Re: [PATCH net-next v6 0/5] Coalesce mac ocp write/modify calls to
 reduce spinlock contention

On 04.11.2023 23:15, Mirsad Goran Todorovac wrote:
> The motivation for these helpers was the locking overhead of 130 consecutive
> r8168_mac_ocp_write() calls in the RTL8411b reset after the NIC gets confused
> if the PHY is powered-down.
> 
> To quote Heiner:
> 
>     On RTL8411b the RX unit gets confused if the PHY is powered-down.
>     This was reported in [0] and confirmed by Realtek. Realtek provided
>     a sequence to fix the RX unit after PHY wakeup.
> 
> A series of about 130 r8168_mac_ocp_write() calls is performed to program the
> RTL registers for recovery, each doing an expensive spin_lock_irqsave() and
> spin_unlock_irqrestore().
> 
> Each mac ocp write is made of:
> 
>     static void __r8168_mac_ocp_write(struct rtl8169_private *tp, u32 reg,
>                       u32 data)
>     {
>         if (rtl_ocp_reg_failure(reg))
>             return;
> 
>         RTL_W32(tp, OCPDR, OCPAR_FLAG | (reg << 15) | data);
>     }
> 
>     static void r8168_mac_ocp_write(struct rtl8169_private *tp, u32 reg,
>                     u32 data)
>     {
>         unsigned long flags;
> 
>         raw_spin_lock_irqsave(&tp->mac_ocp_lock, flags);
>         __r8168_mac_ocp_write(tp, reg, data);
>         raw_spin_unlock_irqrestore(&tp->mac_ocp_lock, flags);
>     }
> 
> Register programming is done through RTL_W32() macro which expands into
> 
>     #define RTL_W32(tp, reg, val32) writel((val32), tp->mmio_addr + (reg))
> 
> which is further (on Alpha):
> 
>     extern inline void writel(u32 b, volatile void __iomem *addr)
>     {
>         mb();
>         __raw_writel(b, addr);
>     }
> 
> or on i386/x86_64:
> 
>     #define build_mmio_write(name, size, type, reg, barrier) \
>     static inline void name(type val, volatile void __iomem *addr) \
>     { asm volatile("mov" size " %0,%1": :reg (val), \
>     "m" (*(volatile type __force *)addr) barrier); }
> 
>     build_mmio_write(writel, "l", unsigned int, "r", :"memory")
> 
> This obviously involves iat least a compiler barrier.
> 
> mb() expands into something like this i.e. on x86_64:
> 
>     #define mb()    asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
> 
> This means a whole lot of memory bus stalls: for spin_lock_irqsave(),
> memory barrier, writel(), and spin_unlock_irqrestore().
> 
> With about 130 of these sequential calls to r8168_mac_ocp_write() this looks like
> a lock storm that will stall all of the cores and CPUs on the same memory controller
> for certain time I/O takes to finish.
> 
> In a sequential case of RTL register programming, the writes to RTL registers
> can be coalesced under a same raw spinlock. This can dramatically decrease the
> number of bus stalls in a multicore or multi-CPU system.
> 
> Macro helpers r8168_mac_ocp_write_seq() and r8168_mac_ocp_modify_seq() are
> provided to reduce lock contention:
> 
>     static void rtl_hw_start_8411_2(struct rtl8169_private *tp)
>     {
> 
>         ...
> 
>         /* The following Realtek-provided magic fixes an issue with the RX unit
>          * getting confused after the PHY having been powered-down.
>          */
> 
>         static const struct recover_8411b_info init_zero_seq[] = {
>             { 0xFC28, 0x0000 }, { 0xFC2A, 0x0000 }, { 0xFC2C, 0x0000 },
>             ...
>         };
> 
>         ...
> 
>         r8168_mac_ocp_write_seq(tp, init_zero_seq);
> 
>         ...
> 
>     }
> 
> The hex data is preserved intact through s/r8168_mac_ocp_write[(]tp,/{ / and s/[)];/ },/
> functions that only changed the function names and the ending of the line, so the actual
> hex data is unchanged.
> 
> To repeat, the reason for the introduction of the original commit
> was to enable recovery of the RX unit on the RTL8411b which was confused by the
> powered-down PHY. This sequence of r8168_mac_ocp_write() calls amplifies the problem
> into a series of about 500+ memory bus locks, most waiting for the main memory read,
> modify and write under a LOCK. The memory barrier in RTL_W32 should suffice for
> the programming sequence to reach RTL NIC registers.
> 
> [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075
> 
> v6:
>  proceeded according to Jacob Keller's suggestions by creating a cover page and reducing
>  the text within the commits. Applying to the net-next tree as Heiner Kallweit requested.
> 
> v5:
>  attempted some new optimisations, which were rejected, but not all and not completely.
> 
> v4:
>  fixed complaints as advised by Heiner and checkpatch.pl.
>  split the patch into five sections to be more easily manipulated and reviewed
>  introduced r8168_mac_ocp_write_seq()
>  applied coalescing of mac ocp writes/modifies for 8168H, 8125 and 8125B
> 
> v3:
>  removed register/mask pair array sentinels, so using ARRAY_SIZE().
>  avoided duplication of RTL_W32() call code as advised by Heiner.
> 
> Mirsad Goran Todorovac (5):
>   r8169: Coalesce r8169_mac_ocp_write/modify calls to reduce spinlock
>     stalls
>   r8169: Coalesce RTL8411b PHY power-down recovery calls to reduce
>     spinlock stalls
>   r8169: Coalesce mac ocp write and modify for 8168H start to reduce
>     spinlocks
>   r8169: Coalesce mac ocp commands for 8125 and 8125B start to reduce
>     spinlock contention
>   r8169: Coalesce mac ocp commands for rtl_hw_init_8125 to reduce
>     spinlocks
> 
>  drivers/net/ethernet/realtek/r8169_main.c | 304 +++++++++++-----------
>  1 file changed, 150 insertions(+), 154 deletions(-)
> 

You still write:
"a lock storm that will stall all of the cores and CPUs on the same memory controller"
even though you were informed that that's not the case.
There's no actual problem, therefore your Fixes tags are incorrect.
Also net-next is closed at the moment.
In patches 3-5 I see no benefit. And I have doubts whether the small benefit in
patch 2 is worth adding all the helpers in patch 1.

Powered by blists - more mailing lists