[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <01aa11e0c8b0aebb1340b5702a42b20c7a7aabd9.camel@redhat.com>
Date: Thu, 09 Nov 2023 13:13:55 +0100
From: Paolo Abeni <pabeni@...hat.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>, Gan Yi Fang
<yi.fang.gan@...el.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu
<joabreu@...opsys.com>, "David S . Miller" <davem@...emloft.net>, Eric
Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Maxime
Coquelin <mcoquelin.stm32@...il.com>, Joakim Zhang
<qiangqing.zhang@....com>, netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, Looi
Hong Aun <hong.aun.looi@...el.com>, Voon Weifeng <weifeng.voon@...el.com>,
Song Yoong Siang <yoong.siang.song@...el.com>
Subject: Re: [PATCH net 1/1] net: stmmac: fix MAC and phylink mismatch issue
after resume with STMMAC_FLAG_USE_PHY_WOL enabled
On Thu, 2023-11-09 at 09:15 +0000, Russell King (Oracle) wrote:
> On Thu, Nov 09, 2023 at 01:00:27PM +0800, Gan Yi Fang wrote:
> > From: "Gan, Yi Fang" <yi.fang.gan@...el.com>
> >
> > The issue happened when flag STMMAC_FLAG_USE_PHY_WOL is enabled.
> > It can be reproduced with steps below:
> > 1. Advertise only one speed on the host
> > 2. Enable the WoL on the host
> > 3. Suspend the host
> > 4. Wake up the host
> >
> > When the WoL is disabled, both the PHY and MAC will suspend and wake up
> > with everything configured well. When WoL is enabled, the PHY needs to be
> > stay awake to receive the signal from remote client but MAC will enter
> > suspend mode.
> >
> > When the MAC resumes from suspend, phylink_resume() will call
> > phylink_start() to start the phylink instance which will trigger the
> > phylink machine to invoke the mac_link_up callback function. The
> > stmmac_mac_link_up() will configure the MAC_CTRL_REG based on the current
> > link state. Then the stmmac_hw_setup() will be called to configure the MAC.
> >
> > This sequence might cause mismatch of the link state between MAC and
> > phylink. This patch moves the phylink_resume() after stmamc_hw_setup() to
> > ensure the MAC is initialized before phylink is being configured.
>
> Isn't this going to cause problems?
>
> stmamc_hw_setup() calls stmmac_init_dma_engine(), which then calls
> stmmac_reset() - and stmmac_reset() can fail if the PHY clock isn't
> running, which is why phylink_resume() gets called before this.
@Gan Yi Fang: at very least we need a solid explanation in the commit
message why this change don't cause the above problems.
Thanks,
Paolo
Powered by blists - more mailing lists