lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 15 Nov 2023 13:17:23 +0100
From: Petr Machata <petrm@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, <netdev@...r.kernel.org>
CC: Ido Schimmel <idosch@...dia.com>, Petr Machata <petrm@...dia.com>, "Amit
 Cohen" <amcohen@...dia.com>, <mlxsw@...dia.com>
Subject: [PATCH net-next 14/14] selftests: mlxsw: Add PCI reset test

From: Ido Schimmel <idosch@...dia.com>

Test that PCI reset works correctly by verifying that only the expected
reset methods are supported and that after issuing the reset the ifindex
of the port changes.

Signed-off-by: Ido Schimmel <idosch@...dia.com>
Reviewed-by: Petr Machata <petrm@...dia.com>
Signed-off-by: Petr Machata <petrm@...dia.com>
---
 .../selftests/drivers/net/mlxsw/pci_reset.sh  | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh b/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh
new file mode 100755
index 000000000000..fe0343b95e6c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/pci_reset.sh
@@ -0,0 +1,58 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that PCI reset works correctly by verifying that only the expected reset
+# methods are supported and that after issuing the reset the ifindex of the
+# port changes.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	pci_reset_test
+"
+NUM_NETIFS=1
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+pci_reset_test()
+{
+	RET=0
+
+	local bus=$(echo $DEVLINK_DEV | cut -d '/' -f 1)
+	local bdf=$(echo $DEVLINK_DEV | cut -d '/' -f 2)
+
+	if [ $bus != "pci" ]; then
+		check_err 1 "devlink device is not a PCI device"
+		log_test "pci reset"
+		return
+	fi
+
+	if [ ! -f /sys/bus/pci/devices/$bdf/reset_method ]; then
+		check_err 1 "reset is not supported"
+		log_test "pci reset"
+		return
+	fi
+
+	[[ $(cat /sys/bus/pci/devices/$bdf/reset_method) == "bus" ]]
+	check_err $? "only \"bus\" reset method should be supported"
+
+	local ifindex_pre=$(ip -j link show dev $swp1 | jq '.[]["ifindex"]')
+
+	echo 1 > /sys/bus/pci/devices/$bdf/reset
+	check_err $? "reset failed"
+
+	# Wait for udev to rename newly created netdev.
+	udevadm settle
+
+	local ifindex_post=$(ip -j link show dev $swp1 | jq '.[]["ifindex"]')
+
+	[[ $ifindex_pre != $ifindex_post ]]
+	check_err $? "reset not performed"
+
+	log_test "pci reset"
+}
+
+swp1=${NETIFS[p1]}
+tests_run
+
+exit $EXIT_STATUS
-- 
2.41.0


Powered by blists - more mailing lists