| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZVTSVIx+S+W/+X4B@shell.armlinux.org.uk>
Date: Wed, 15 Nov 2023 14:14:44 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Luo Jie <quic_luoj@...cinc.com>
Cc: andrew@...n.ch, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
hkallweit1@...il.com, corbet@....net, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org
Subject: Re: [PATCH v3 1/6] net: phylink: move phylink_pcs_neg_mode() to
phylink.c
Hi,
You don't need this patch for your series, and you're bypassing my
ability to decide when this patch should be merged (which is not yet,
I want things to remain as-is for another cycle.)
In theory, looking at past history, 6.7 will probably be a LTS kernel,
but until that is known for certain, I don't want to commit to moving
this function in case LTS gets delayed by a cycle.
Please drop it from your series.
Thanks.
On Wed, Nov 15, 2023 at 10:06:25PM +0800, Luo Jie wrote:
> From: Vladimir Oltean <vladimir.oltean@....com>
>
> Russell points out that there is no user of phylink_pcs_neg_mode()
> outside of phylink.c, nor is there planned to be any, so we can just
> move it there.
>
> Suggested-by: Russell King (Oracle) <linux@...linux.org.uk>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
> Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
> ---
> drivers/net/phy/phylink.c | 65 ++++++++++++++++++++++++++++++++++++++
> include/linux/phylink.h | 66 ---------------------------------------
> 2 files changed, 65 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 25c19496a336..162f51b0986a 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -162,6 +162,71 @@ static const char *phylink_an_mode_str(unsigned int mode)
> return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
> }
>
> +/**
> + * phylink_pcs_neg_mode() - helper to determine PCS inband mode
> + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
> + * @interface: interface mode to be used
> + * @advertising: adertisement ethtool link mode mask
> + *
> + * Determines the negotiation mode to be used by the PCS, and returns
> + * one of:
> + *
> + * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
> + * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
> + * will be used.
> + * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg
> + * disabled
> + * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
> + *
> + * Note: this is for cases where the PCS itself is involved in negotiation
> + * (e.g. Clause 37, SGMII and similar) not Clause 73.
> + */
> +static unsigned int phylink_pcs_neg_mode(unsigned int mode, phy_interface_t interface,
> + const unsigned long *advertising)
> +{
> + unsigned int neg_mode;
> +
> + switch (interface) {
> + case PHY_INTERFACE_MODE_SGMII:
> + case PHY_INTERFACE_MODE_QSGMII:
> + case PHY_INTERFACE_MODE_QUSGMII:
> + case PHY_INTERFACE_MODE_USXGMII:
> + /* These protocols are designed for use with a PHY which
> + * communicates its negotiation result back to the MAC via
> + * inband communication. Note: there exist PHYs that run
> + * with SGMII but do not send the inband data.
> + */
> + if (!phylink_autoneg_inband(mode))
> + neg_mode = PHYLINK_PCS_NEG_OUTBAND;
> + else
> + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
> + break;
> +
> + case PHY_INTERFACE_MODE_1000BASEX:
> + case PHY_INTERFACE_MODE_2500BASEX:
> + /* 1000base-X is designed for use media-side for Fibre
> + * connections, and thus the Autoneg bit needs to be
> + * taken into account. We also do this for 2500base-X
> + * as well, but drivers may not support this, so may
> + * need to override this.
> + */
> + if (!phylink_autoneg_inband(mode))
> + neg_mode = PHYLINK_PCS_NEG_OUTBAND;
> + else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
> + advertising))
> + neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
> + else
> + neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
> + break;
> +
> + default:
> + neg_mode = PHYLINK_PCS_NEG_NONE;
> + break;
> + }
> +
> + return neg_mode;
> +}
> +
> static unsigned int phylink_interface_signal_rate(phy_interface_t interface)
> {
> switch (interface) {
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index 875439ab45de..d589f89c612c 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -98,72 +98,6 @@ static inline bool phylink_autoneg_inband(unsigned int mode)
> return mode == MLO_AN_INBAND;
> }
>
> -/**
> - * phylink_pcs_neg_mode() - helper to determine PCS inband mode
> - * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
> - * @interface: interface mode to be used
> - * @advertising: adertisement ethtool link mode mask
> - *
> - * Determines the negotiation mode to be used by the PCS, and returns
> - * one of:
> - *
> - * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
> - * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
> - * will be used.
> - * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg
> - * disabled
> - * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
> - *
> - * Note: this is for cases where the PCS itself is involved in negotiation
> - * (e.g. Clause 37, SGMII and similar) not Clause 73.
> - */
> -static inline unsigned int phylink_pcs_neg_mode(unsigned int mode,
> - phy_interface_t interface,
> - const unsigned long *advertising)
> -{
> - unsigned int neg_mode;
> -
> - switch (interface) {
> - case PHY_INTERFACE_MODE_SGMII:
> - case PHY_INTERFACE_MODE_QSGMII:
> - case PHY_INTERFACE_MODE_QUSGMII:
> - case PHY_INTERFACE_MODE_USXGMII:
> - /* These protocols are designed for use with a PHY which
> - * communicates its negotiation result back to the MAC via
> - * inband communication. Note: there exist PHYs that run
> - * with SGMII but do not send the inband data.
> - */
> - if (!phylink_autoneg_inband(mode))
> - neg_mode = PHYLINK_PCS_NEG_OUTBAND;
> - else
> - neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
> - break;
> -
> - case PHY_INTERFACE_MODE_1000BASEX:
> - case PHY_INTERFACE_MODE_2500BASEX:
> - /* 1000base-X is designed for use media-side for Fibre
> - * connections, and thus the Autoneg bit needs to be
> - * taken into account. We also do this for 2500base-X
> - * as well, but drivers may not support this, so may
> - * need to override this.
> - */
> - if (!phylink_autoneg_inband(mode))
> - neg_mode = PHYLINK_PCS_NEG_OUTBAND;
> - else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
> - advertising))
> - neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
> - else
> - neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
> - break;
> -
> - default:
> - neg_mode = PHYLINK_PCS_NEG_NONE;
> - break;
> - }
> -
> - return neg_mode;
> -}
> -
> /**
> * struct phylink_link_state - link state structure
> * @advertising: ethtool bitmask containing advertised link modes
> --
> 2.42.0
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists