| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231116144119.78769-6-ivecera@redhat.com>
Date: Thu, 16 Nov 2023 15:41:19 +0100
From: Ivan Vecera <ivecera@...hat.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
linux-kernel@...r.kernel.org,
Jacob Keller <jacob.e.keller@...el.com>,
Wojciech Drewek <wojciech.drewek@...el.com>,
Simon Horman <horms@...nel.org>,
mschmidt@...hat.com,
netdev@...r.kernel.org
Subject: [PATCH iwl-next v2 5/5] i40e: Remove VEB recursion
The VEB (virtual embedded switch) as a switch element can be
connected according datasheet though its uplink to:
- Physical port
- Port Virtualizer (not used directly by i40e driver but can
be present in MFP mode where the physical port is shared
between PFs)
- No uplink (aka floating VEB)
But VEB uplink cannot be connected to another VEB and any attempt
to do so results in:
"i40e 0000:02:00.0: couldn't add VEB, err -EIO aq_err I40E_AQ_RC_ENOENT"
that indicates "the uplink SEID does not point to valid element".
Remove this logic from the driver code this way:
1) For debugfs only allow to build floating VEB (uplink_seid == 0)
or main VEB (uplink_seid == mac_seid)
2) Do not recurse in i40e_veb_link_event() as no VEB cannot have
sub-VEBs
3) Ditto for i40e_veb_rebuild() + simplify the function as we know
that the VEB for rebuild can be only the main LAN VEB or some
of the floating VEBs
4) In i40e_rebuild() there is no need to check veb->uplink_seid
as the possible ones are 0 and MAC SEID
5) In i40e_vsi_release() do not take into account VEBs whose
uplink is another VEB as this is not possible
6) Remove veb_idx field from i40e_veb as a VEB cannot have
sub-VEBs
Tested using i40e debugfs interface:
1) Initial state
[root@...-03 net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@...-03 net-next]# echo dump switch > $CMD
[root@...-03 net-next]# dmesg -c
[ 98.440641] i40e 0000:02:00.0: header: 3 reported 3 total
[ 98.446053] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 98.452593] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 98.458856] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@...-03 net-next]# echo add relay > $CMD
[root@...-03 net-next]# dmesg -c
[ 122.745630] i40e 0000:02:00.0: added relay 162
[root@...-03 net-next]# echo dump switch > $CMD
[root@...-03 net-next]# dmesg -c
[ 136.650049] i40e 0000:02:00.0: header: 4 reported 4 total
[ 136.655466] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 136.661994] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 136.668264] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 136.674787] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@...-03 net-next]# dmesg -c
[ 168.351763] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 168.374652] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@...-03 net-next]# echo dump switch > $CMD
[root@...-03 net-next]# dmesg -c
[ 195.683204] i40e 0000:02:00.0: header: 5 reported 5 total
[ 195.688611] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 195.695143] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 195.701410] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 195.707935] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 195.714201] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@...-03 net-next]# echo del relay 162 > $CMD
[root@...-03 net-next]# dmesg -c
[ 239.260901] i40e 0000:02:00.0: deleting relay 162
[ 239.265621] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@...-03 net-next]# echo pfr > $CMD
[root@...-03 net-next]# echo dump switch > $CMD
[root@...-03 net-next]# dmesg -c
...
[ 272.333655] i40e 0000:02:00.0: header: 5 reported 5 total
[ 272.339066] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 272.345599] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 272.351862] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 272.358387] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 272.364654] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[ 297.199116] i40e 0000:02:00.0: deleting VSI 394
[ 299.807580] i40e 0000:02:00.0: deleting relay 162
[ 309.767905] i40e 0000:02:00.0: header: 3 reported 3 total
[ 309.773318] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 309.779845] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 309.786111] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Signed-off-by: Ivan Vecera <ivecera@...hat.com>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 -
.../net/ethernet/intel/i40e/i40e_debugfs.c | 8 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 176 ++++++++----------
3 files changed, 76 insertions(+), 109 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 3fe628515fc9..d67f2c54e1bc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -783,7 +783,6 @@ struct i40e_new_mac_filter {
struct i40e_veb {
struct i40e_pf *pf;
u16 idx;
- u16 veb_idx; /* index of VEB parent */
u16 seid;
u16 uplink_seid;
u16 stats_idx; /* index of VEB parent */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 45301570f9b2..805342d12117 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -683,9 +683,8 @@ static void i40e_dbg_dump_veb_seid(struct i40e_pf *pf, int seid)
return;
}
dev_info(&pf->pdev->dev,
- "veb idx=%d,%d stats_ic=%d seid=%d uplink=%d mode=%s\n",
- veb->idx, veb->veb_idx, veb->stats_idx, veb->seid,
- veb->uplink_seid,
+ "veb idx=%d stats_ic=%d seid=%d uplink=%d mode=%s\n",
+ veb->idx, veb->stats_idx, veb->seid, veb->uplink_seid,
veb->bridge_mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB");
i40e_dbg_dump_eth_stats(pf, &veb->stats);
}
@@ -848,8 +847,7 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
goto command_write_done;
}
- veb = i40e_veb_get_by_seid(pf, uplink_seid);
- if (!veb && uplink_seid != 0 && uplink_seid != pf->mac_seid) {
+ if (uplink_seid != 0 && uplink_seid != pf->mac_seid) {
dev_info(&pf->pdev->dev,
"add relay: relay uplink %d not found\n",
uplink_seid);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 8655c1f4e9f2..e33e8f66c3e0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9871,7 +9871,6 @@ static void i40e_vsi_link_event(struct i40e_vsi *vsi, bool link_up)
**/
static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
{
- struct i40e_veb *veb_it;
struct i40e_vsi *vsi;
struct i40e_pf *pf;
int i;
@@ -9880,12 +9879,7 @@ static void i40e_veb_link_event(struct i40e_veb *veb, bool link_up)
return;
pf = veb->pf;
- /* depth first... */
- i40e_pf_for_each_veb(pf, i, veb_it)
- if (veb_it->uplink_seid == veb->seid)
- i40e_veb_link_event(veb_it, link_up);
-
- /* ... now the local VSIs */
+ /* Send link event to contained VSIs */
i40e_pf_for_each_vsi(pf, i, vsi)
if (vsi->uplink_seid == veb->seid)
i40e_vsi_link_event(vsi, link_up);
@@ -10363,56 +10357,57 @@ static void i40e_config_bridge_mode(struct i40e_veb *veb)
}
/**
- * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
+ * i40e_reconstitute_veb - rebuild the VEB and VSIs connected to it
* @veb: pointer to the VEB instance
*
- * This is a recursive function that first builds the attached VSIs then
- * recurses in to build the next layer of VEB. We track the connections
- * through our own index numbers because the seid's from the HW could
- * change across the reset.
+ * This is a function that builds the attached VSIs. We track the connections
+ * through our own index numbers because the seid's from the HW could change
+ * across the reset.
**/
static int i40e_reconstitute_veb(struct i40e_veb *veb)
{
struct i40e_vsi *ctl_vsi = NULL;
struct i40e_pf *pf = veb->pf;
- struct i40e_veb *veb_it;
struct i40e_vsi *vsi;
int v, ret;
- if (veb->uplink_seid) {
- /* Look for VSI that owns this VEB, temporarily attached to base VEB */
- i40e_pf_for_each_vsi(pf, v, vsi)
- if (vsi->veb_idx == veb->idx &&
- vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
- ctl_vsi = vsi;
- break;
- }
+ /* As we do not maintain PV (port virtualizer) switch element then
+ * there can be only one non-floating VEB that have uplink to MAC SEID
+ * and its control VSI is the main one.
+ */
+ if (WARN_ON(veb->uplink_seid && veb->uplink_seid != pf->mac_seid)) {
+ dev_err(&pf->pdev->dev,
+ "Invalid uplink SEID for VEB %d\n", veb->idx);
+ return -ENOENT;
+ }
- if (!ctl_vsi) {
- dev_info(&pf->pdev->dev,
- "missing owner VSI for veb_idx %d\n",
- veb->idx);
- ret = -ENOENT;
- goto end_reconstitute;
+ if (veb->uplink_seid == pf->mac_seid) {
+ /* Check that the LAN VSI has VEB owning flag set */
+ ctl_vsi = pf->vsi[pf->lan_vsi];
+
+ if (WARN_ON(ctl_vsi->veb_idx != veb->idx ||
+ !(ctl_vsi->flags & I40E_VSI_FLAG_VEB_OWNER))) {
+ dev_err(&pf->pdev->dev,
+ "Invalid control VSI for VEB %d\n", veb->idx);
+ return -ENOENT;
}
- if (ctl_vsi != pf->vsi[pf->lan_vsi])
- ctl_vsi->uplink_seid =
- pf->vsi[pf->lan_vsi]->uplink_seid;
+ /* Add the control VSI to switch */
ret = i40e_add_vsi(ctl_vsi);
if (ret) {
- dev_info(&pf->pdev->dev,
- "rebuild of veb_idx %d owner VSI failed: %d\n",
- veb->idx, ret);
- goto end_reconstitute;
+ dev_err(&pf->pdev->dev,
+ "Rebuild of owner VSI for VEB %d failed: %d\n",
+ veb->idx, ret);
+ return ret;
}
+
i40e_vsi_reset_stats(ctl_vsi);
}
/* create the VEB in the switch and move the VSI onto the VEB */
ret = i40e_add_veb(veb, ctl_vsi);
if (ret)
- goto end_reconstitute;
+ return ret;
if (veb->uplink_seid) {
if (test_bit(I40E_FLAG_VEB_MODE_ENA, pf->flags))
@@ -10434,23 +10429,12 @@ static int i40e_reconstitute_veb(struct i40e_veb *veb)
dev_info(&pf->pdev->dev,
"rebuild of vsi_idx %d failed: %d\n",
v, ret);
- goto end_reconstitute;
+ return ret;
}
i40e_vsi_reset_stats(vsi);
}
}
- /* create any VEBs attached to this VEB - RECURSION */
- i40e_pf_for_each_veb(pf, v, veb_it) {
- if (veb_it->veb_idx == veb->idx) {
- veb_it->uplink_seid = veb->seid;
- ret = i40e_reconstitute_veb(veb_it);
- if (ret)
- break;
- }
- }
-
-end_reconstitute:
return ret;
}
@@ -10990,31 +10974,29 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
*/
if (vsi->uplink_seid != pf->mac_seid) {
dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
- /* find the one VEB connected to the MAC, and find orphans */
+
+ /* Rebuild VEBs */
i40e_pf_for_each_veb(pf, v, veb) {
- if (veb->uplink_seid == pf->mac_seid ||
- veb->uplink_seid == 0) {
- ret = i40e_reconstitute_veb(veb);
- if (!ret)
- continue;
-
- /* If Main VEB failed, we're in deep doodoo,
- * so give up rebuilding the switch and set up
- * for minimal rebuild of PF VSI.
- * If orphan failed, we'll report the error
- * but try to keep going.
- */
- if (veb->uplink_seid == pf->mac_seid) {
- dev_info(&pf->pdev->dev,
- "rebuild of switch failed: %d, will try to set up simple PF connection\n",
- ret);
- vsi->uplink_seid = pf->mac_seid;
- break;
- } else if (veb->uplink_seid == 0) {
- dev_info(&pf->pdev->dev,
- "rebuild of orphan VEB failed: %d\n",
- ret);
- }
+ ret = i40e_reconstitute_veb(veb);
+ if (!ret)
+ continue;
+
+ /* If Main VEB failed, we're in deep doodoo,
+ * so give up rebuilding the switch and set up
+ * for minimal rebuild of PF VSI.
+ * If orphan failed, we'll report the error
+ * but try to keep going.
+ */
+ if (veb->uplink_seid == pf->mac_seid) {
+ dev_info(&pf->pdev->dev,
+ "rebuild of switch failed: %d, will try to set up simple PF connection\n",
+ ret);
+ vsi->uplink_seid = pf->mac_seid;
+ break;
+ } else if (veb->uplink_seid == 0) {
+ dev_info(&pf->pdev->dev,
+ "rebuild of orphan VEB failed: %d\n",
+ ret);
}
}
}
@@ -14138,9 +14120,9 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
**/
int i40e_vsi_release(struct i40e_vsi *vsi)
{
- struct i40e_veb *veb, *veb_it;
struct i40e_mac_filter *f;
struct hlist_node *h;
+ struct i40e_veb *veb;
struct i40e_pf *pf;
u16 uplink_seid;
int i, n, bkt;
@@ -14204,27 +14186,28 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
/* If this was the last thing on the VEB, except for the
* controlling VSI, remove the VEB, which puts the controlling
- * VSI onto the next level down in the switch.
+ * VSI onto the uplink port.
*
* Well, okay, there's one more exception here: don't remove
- * the orphan VEBs yet. We'll wait for an explicit remove request
+ * the floating VEBs yet. We'll wait for an explicit remove request
* from up the network stack.
*/
- n = 0;
- i40e_pf_for_each_vsi(pf, i, vsi)
- if (vsi->uplink_seid == uplink_seid &&
- (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
- n++; /* count the VSIs */
+ veb = i40e_veb_get_by_seid(pf, uplink_seid);
+ if (veb && veb->uplink_seid) {
+ n = 0;
+
+ /* Count non-controlling VSIs present on the VEB */
+ i40e_pf_for_each_vsi(pf, i, vsi)
+ if (vsi->uplink_seid == uplink_seid &&
+ (vsi->flags & I40E_VSI_FLAG_VEB_OWNER) == 0)
+ n++;
- veb = NULL;
- i40e_pf_for_each_veb(pf, i, veb_it) {
- if (veb_it->uplink_seid == uplink_seid)
- n++; /* count the VEBs */
- if (veb_it->seid == uplink_seid)
- veb = veb_it;
+ /* If there is no VSI except the control one then release
+ * the VEB and put the control VSI onto VEB uplink.
+ */
+ if (!n)
+ i40e_veb_release(veb);
}
- if (n == 0 && veb && veb->uplink_seid != 0)
- i40e_veb_release(veb);
return 0;
}
@@ -14738,14 +14721,11 @@ void i40e_veb_release(struct i40e_veb *veb)
return;
}
- /* For regular VEB move the owner VSI to uplink VEB */
+ /* For regular VEB move the owner VSI to uplink port */
if (veb->uplink_seid) {
vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
vsi->uplink_seid = veb->uplink_seid;
- if (veb->uplink_seid == pf->mac_seid)
- vsi->veb_idx = I40E_NO_VEB;
- else
- vsi->veb_idx = veb->veb_idx;
+ vsi->veb_idx = I40E_NO_VEB;
}
i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
@@ -14825,8 +14805,8 @@ struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
u16 uplink_seid, u16 vsi_seid,
u8 enabled_tc)
{
- struct i40e_veb *veb, *uplink_veb = NULL;
struct i40e_vsi *vsi = NULL;
+ struct i40e_veb *veb;
int veb_idx;
int ret;
@@ -14848,14 +14828,6 @@ struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
return NULL;
}
}
- if (uplink_seid && uplink_seid != pf->mac_seid) {
- uplink_veb = i40e_veb_get_by_seid(pf, uplink_seid);
- if (!uplink_veb) {
- dev_info(&pf->pdev->dev,
- "uplink seid %d not found\n", uplink_seid);
- return NULL;
- }
- }
/* get veb sw struct */
veb_idx = i40e_veb_mem_alloc(pf);
@@ -14864,7 +14836,6 @@ struct i40e_veb *i40e_veb_setup(struct i40e_pf *pf, u16 flags,
veb = pf->veb[veb_idx];
veb->flags = flags;
veb->uplink_seid = uplink_seid;
- veb->veb_idx = (uplink_veb ? uplink_veb->idx : I40E_NO_VEB);
veb->enabled_tc = (enabled_tc ? enabled_tc : 0x1);
/* create the VEB in the switch */
@@ -14935,7 +14906,6 @@ static void i40e_setup_pf_switch_element(struct i40e_pf *pf,
pf->veb[pf->lan_veb]->seid = seid;
pf->veb[pf->lan_veb]->uplink_seid = pf->mac_seid;
pf->veb[pf->lan_veb]->pf = pf;
- pf->veb[pf->lan_veb]->veb_idx = I40E_NO_VEB;
break;
case I40E_SWITCH_ELEMENT_TYPE_VSI:
if (num_reported != 1)
--
2.41.0
Powered by blists - more mailing lists