netdev - Re: [PATCH 7/9] net: mdio: ipq4019: program phy address when "fixup" defined

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <272ce8f7-9c57-4d5f-a609-52c098b63227@quicinc.com>
Date: Thu, 16 Nov 2023 19:17:05 +0800
From: Jie Luo <quic_luoj@...cinc.com>
To: Andrew Lunn <andrew@...n.ch>
CC: <agross@...nel.org>, <andersson@...nel.org>, <konrad.dybcio@...aro.org>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <hkallweit1@...il.com>, <linux@...linux.org.uk>,
        <robert.marko@...tura.hr>, <linux-arm-msm@...r.kernel.org>,
        <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <quic_srichara@...cinc.com>
Subject: Re: [PATCH 7/9] net: mdio: ipq4019: program phy address when "fixup"
 defined



On 11/16/2023 12:17 AM, Andrew Lunn wrote:
> On Wed, Nov 15, 2023 at 11:25:13AM +0800, Luo Jie wrote:
>> The PHY/PCS MDIO address can be programed when the property
>> "fixup" of phy node is defined.
>>
>> The qca8084 PHY/PCS address configuration register is accessed
>> by MDIO bus with the special MDIO sequence.
>>
>> The PHY address configuration register of IPQ5018 is accessed
>> by local bus.
>>
>> Add the function ipq_mdio_preinit, which should be called before
>> the PHY device scanned and registered.
> 
> I'm not convinced this belongs in the MDIO bus driver. Its really a
> PHY property, so i think all this should be in the PHY driver. If you
> specify the PHY ID in the compatible string, you can get the driver
> loaded and the probe function called. You can then set the PHY
> address.
> 
> 	Andrew

I will try to do the initialization configs in the PHY probe function,
Thanks Andrew for the suggestions.