[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <45784368-93e0-4d57-bb0c-5730f53f5a08@lunn.ch>
Date: Mon, 20 Nov 2023 22:25:10 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Daniel Golle <daniel@...rotopia.org>,
Qingfang Deng <dqfext@...il.com>,
SkyLake Huang <SkyLake.Huang@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
David Epping <david.epping@...singlinkelectronics.com>,
Vladimir Oltean <olteanv@...il.com>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
Harini Katakam <harini.katakam@....com>,
Simon Horman <horms@...nel.org>,
Robert Marko <robert.marko@...tura.hr>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet
PHY package nodes
> A real DT that use this is (ipq807x):
>
> &mdio {
> status = "okay";
> pinctrl-0 = <&mdio_pins>;
> pinctrl-names = "default";
> reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
>
> ethernet-phy-package {
> compatible = "ethernet-phy-package";
> phy-mode = "psgmii";
>
> global-phys = <&qca8075_4>, <&qca8075_psgmii>;
> global-phy-names = "combo", "analog_psgmii";
>
> qca8075_0: ethernet-phy@0 {
> compatible = "ethernet-phy-ieee802.3-c22";
> reg = <0>;
> };
...
> };
>
> qca8081: ethernet-phy@28 {
> compatible = "ethernet-phy-id004d.d101";
> reg = <28>;
> reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
> };
I've no idea if DT allows this. The issue is that reg is the same for
both nodes within the ethernet-phy-package container, and
ethernet-phy@28. They are all addresses on the same MDIO bus. We are
parsing this bus structure ourselves in __of_mdiobus_register(), so we
could make it work, but i don't know if we should make it work.
Andrew
Powered by blists - more mailing lists