[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ea3567ef-1293-4679-bd25-730c1b3e60b9@tuxon.dev>
Date: Mon, 20 Nov 2023 11:05:08 +0200
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Geert Uytterhoeven <geert@...ux-m68k.org>, Arnd Bergmann <arnd@...db.de>
Cc: Sergey Shtylyov <s.shtylyov@....ru>,
"David S . Miller" <davem@...emloft.net>, Eric Dumazet
<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
krzysztof.kozlowski+dt@...aro.org, Conor Dooley <conor+dt@...nel.org>,
Russell King <linux@...linux.org.uk>, Magnus Damm <magnus.damm@...il.com>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Linus Walleij <linus.walleij@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>, Andrew Davis <afd@...com>,
Mark Brown <broonie@...nel.org>,
Alexander Stein <alexander.stein@...tq-group.com>,
eugen.hristev@...labora.com, sergei.shtylyov@...il.com,
"Lad, Prabhakar" <prabhakar.mahadev-lad.rj@...renesas.com>,
Biju Das <biju.das.jz@...renesas.com>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Netdev <netdev@...r.kernel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 14/14] arm: multi_v7_defconfig: Enable CONFIG_RAVB
On 20.11.2023 10:58, Geert Uytterhoeven wrote:
> On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann <arnd@...db.de> wrote:
>> On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:
>>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>>
>>> ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.
>
> Used by:
> - iWave-RZ/G1M/G1N Qseven carrier board,
> - iWave-RZ/G1H Qseven board,
> - iWave-RZG1E SODIMM carrier board,
> - iWave-RZ/G1C single board computer.
>
> So I'd write "used by various iWave RZ/G1 development boards".
OK, I'll update it in v2.
I noticed it is needed while checking various bits on a RZ/G1H based board
so I considered that if there is at least one user for it it is enough to
have it enabled.
Thank you,
Claudiu Beznea
>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>>
>> We have a mix of =y and =m for ethernet drivers, and usually
>> only have drivers built-in when they are frequently tested
>> with NFS root booting.
>>
>> Do you need this as well, or could it be =m instead?
>
> As the default chosen/bootargs for the iWave-RZ/G1M/G1N Qseven carrier
> board contains root=/dev/nfs, builtin is appropriate.
> The iWave-RZ/G1H Qseven board defaults to root=/dev/mmcblk0p1.
>
> Gr{oetje,eeting}s,
>
> Geert
>
Powered by blists - more mailing lists