netdev - Re: [PATCH v6 net-next 5/7] net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <73c9030e-28dc-447d-8888-2504a01e549d@kernel.org>
Date: Tue, 21 Nov 2023 11:25:03 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Vladimir Oltean <vladimir.oltean@....com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
 pabeni@...hat.com, s-vadapalli@...com, r-gunasekaran@...com,
 vigneshr@...com, srk@...com, horms@...nel.org, p-varis@...com,
 netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
 Grygorii Strashko <grygorii.strashko@...com>
Subject: Re: [PATCH v6 net-next 5/7] net: ethernet: ti: am65-cpsw: add mqprio
 qdisc offload in channel mode



On 21/11/2023 01:03, Vladimir Oltean wrote:
> On Mon, Nov 20, 2023 at 04:01:45PM +0200, Roger Quadros wrote:
>> +static int am65_cpsw_setup_mqprio(struct net_device *ndev, void *type_data)
>> +{
>> +	struct am65_cpsw_port *port = am65_ndev_to_port(ndev);
>> +	struct am65_cpsw_mqprio *p_mqprio = &port->qos.mqprio;
>> +	struct tc_mqprio_qopt_offload *mqprio = type_data;
>> +	struct am65_cpsw_common *common = port->common;
>> +	struct tc_mqprio_qopt *qopt = &mqprio->qopt;
>> +	int i, tc, offset, count, prio, ret;
>> +	u8 num_tc = qopt->num_tc;
>> +	u32 tx_prio_map = 0;
>> +
>> +	memcpy(&p_mqprio->mqprio_hw, mqprio, sizeof(*mqprio));
>> +
>> +	ret = pm_runtime_get_sync(common->dev);
>> +	if (ret < 0) {
>> +		pm_runtime_put_noidle(common->dev);
>> +		return ret;
>> +	}
>> +
>> +	if (!num_tc) {
>> +		am65_cpsw_reset_tc_mqprio(ndev);
>> +		ret = -EINVAL;
> 
> num_tc == 0 is what signals the deletion of the mqprio qdisc.
> Why return -EINVAL?

Right. I'll drop the -EINVAL.
> 
>> +		goto exit_put;
>> +	}
>> +
>> +	ret = am65_cpsw_mqprio_verify_shaper(port, mqprio);
>> +	if (ret)
>> +		goto exit_put;
>> +
>> +	netdev_set_num_tc(ndev, num_tc);
>> +
>> +	/* Multiple Linux priorities can map to a Traffic Class
>> +	 * A Traffic Class can have multiple contiguous Queues,
>> +	 * Queues get mapped to Channels (thread_id),
>> +	 *	if not VLAN tagged, thread_id is used as packet_priority
>> +	 *	if VLAN tagged. VLAN priority is used as packet_priority
>> +	 * packet_priority gets mapped to header_priority in p0_rx_pri_map,
>> +	 * header_priority gets mapped to switch_priority in pn_tx_pri_map.
>> +	 * As p0_rx_pri_map is left at defaults (0x76543210), we can
>> +	 * assume that Queue_n gets mapped to header_priority_n. We can then
>> +	 * set the switch priority in pn_tx_pri_map.
>> +	 */
>> +
>> +	for (tc = 0; tc < num_tc; tc++) {
>> +		prio = tc;
>> +
>> +		/* For simplicity we assign the same priority (TCn) to
>> +		 * all queues of a Traffic Class.
>> +		 */
>> +		for (i = qopt->offset[tc]; i < qopt->offset[tc] + qopt->count[tc]; i++)
>> +			tx_prio_map |= prio << (4 * i);
>> +
>> +		count = qopt->count[tc];
>> +		offset = qopt->offset[tc];
>> +		netdev_set_tc_queue(ndev, tc, count, offset);
>> +	}
>> +
>> +	writel(tx_prio_map, port->port_base + AM65_CPSW_PN_REG_TX_PRI_MAP);
>> +
>> +	am65_cpsw_tx_pn_shaper_apply(port);
>> +
>> +exit_put:
>> +	pm_runtime_put(common->dev);
>> +
>> +	return ret;
>> +}
>> +
>>  static int am65_cpsw_port_est_enabled(struct am65_cpsw_port *port)
>>  {
>>  	return port->qos.est_oper || port->qos.est_admin;
>> @@ -737,16 +989,6 @@ static int am65_cpsw_qos_setup_tc_block(struct net_device *ndev, struct flow_blo
>>  					  port, port, true);
>>  }
>>  
>> -static u32
>> -am65_cpsw_qos_tx_rate_calc(u32 rate_mbps, unsigned long bus_freq)
>> -{
>> -	u32 ir;
>> -
>> -	bus_freq /= 1000000;
>> -	ir = DIV_ROUND_UP(((u64)rate_mbps * 32768),  bus_freq);
>> -	return ir;
>> -}
>> -
> 
> Insufficient code movement in the previous patch?

Let me move it to patch 3.

-- 
cheers,
-roger