netdev - [PATCH net-next v1 2/3] net: dsa: microchip: Remove redundant optimization in ksz8_w_phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20231121152426.4188456-2-o.rempel@pengutronix.de>
Date: Tue, 21 Nov 2023 16:24:25 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: "David S. Miller" <davem@...emloft.net>,
	Andrew Lunn <andrew@...n.ch>,
	Eric Dumazet <edumazet@...gle.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Vladimir Oltean <olteanv@...il.com>,
	Woojung Huh <woojung.huh@...rochip.com>,
	Arun Ramadoss <arun.ramadoss@...rochip.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
	kernel@...gutronix.de,
	linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org,
	UNGLinuxDriver@...rochip.com
Subject: [PATCH net-next v1 2/3] net: dsa: microchip: Remove redundant optimization in ksz8_w_phy_bmcr

Remove the manual checks for register value changes in the
ksz8_w_phy_bmcr function. Instead, rely on regmap_update_bits() for
optimizing register updates.

Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/dsa/microchip/ksz8795.c | 95 +++++++++--------------------
 1 file changed, 28 insertions(+), 67 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 835157815937..4c1e21fd87da 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -951,107 +951,68 @@ static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val)
 static int ksz8_w_phy_bmcr(struct ksz_device *dev, int port, u16 val)
 {
 	const u16 *regs = dev->info->regs;
-	u8 restart, ctrl, speed, data;
+	u8 restart, speed, ctrl, restart_mask;
 	int ret;
 
 	/* Do not support PHY reset function. */
 	if (val & BMCR_RESET)
 		return 0;
 
-	ret = ksz_pread8(dev, port, regs[P_SPEED_STATUS], &speed);
-	if (ret)
-		return ret;
-
-	data = speed;
+	speed = 0;
 	if (val & KSZ886X_BMCR_HP_MDIX)
-		data |= PORT_HP_MDIX;
-	else
-		data &= ~PORT_HP_MDIX;
-
-	if (data != speed) {
-		ret = ksz_pwrite8(dev, port, regs[P_SPEED_STATUS], data);
-		if (ret)
-			return ret;
-	}
+		speed |= PORT_HP_MDIX;
 
-	ret = ksz_pread8(dev, port, regs[P_FORCE_CTRL], &ctrl);
+	ret = ksz_prmw8(dev, port, regs[P_SPEED_STATUS], PORT_HP_MDIX, speed);
 	if (ret)
 		return ret;
 
-	data = ctrl;
+	ctrl = 0;
 	if (ksz_is_ksz88x3(dev)) {
 		if ((val & BMCR_ANENABLE))
-			data |= PORT_AUTO_NEG_ENABLE;
-		else
-			data &= ~PORT_AUTO_NEG_ENABLE;
+			ctrl |= PORT_AUTO_NEG_ENABLE;
 	} else {
 		if (!(val & BMCR_ANENABLE))
-			data |= PORT_AUTO_NEG_DISABLE;
-		else
-			data &= ~PORT_AUTO_NEG_DISABLE;
+			ctrl |= PORT_AUTO_NEG_DISABLE;
 
 		/* Fiber port does not support auto-negotiation. */
 		if (dev->ports[port].fiber)
-			data |= PORT_AUTO_NEG_DISABLE;
+			ctrl |= PORT_AUTO_NEG_DISABLE;
 	}
 
 	if (val & BMCR_SPEED100)
-		data |= PORT_FORCE_100_MBIT;
-	else
-		data &= ~PORT_FORCE_100_MBIT;
+		ctrl |= PORT_FORCE_100_MBIT;
 	if (val & BMCR_FULLDPLX)
-		data |= PORT_FORCE_FULL_DUPLEX;
-	else
-		data &= ~PORT_FORCE_FULL_DUPLEX;
+		ctrl |= PORT_FORCE_FULL_DUPLEX;
 
-	if (data != ctrl) {
-		ret = ksz_pwrite8(dev, port, regs[P_FORCE_CTRL], data);
-		if (ret)
-			return ret;
-	}
-
-	ret = ksz_pread8(dev, port, regs[P_NEG_RESTART_CTRL], &restart);
+	ret = ksz_prmw8(dev, port, regs[P_FORCE_CTRL], PORT_FORCE_100_MBIT |
+		 /* PORT_AUTO_NEG_ENABLE and PORT_AUTO_NEG_DISABLE are the same
+		  * bits
+		  */
+		 PORT_FORCE_FULL_DUPLEX | PORT_AUTO_NEG_ENABLE, ctrl);
 	if (ret)
 		return ret;
 
-	data = restart;
+	restart = 0;
+	restart_mask = PORT_LED_OFF | PORT_TX_DISABLE | PORT_AUTO_NEG_RESTART |
+		PORT_POWER_DOWN | PORT_AUTO_MDIX_DISABLE | PORT_FORCE_MDIX |
+		PORT_PHY_LOOPBACK;
 	if (val & KSZ886X_BMCR_DISABLE_LED)
-		data |= PORT_LED_OFF;
-	else
-		data &= ~PORT_LED_OFF;
+		restart |= PORT_LED_OFF;
 	if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
-		data |= PORT_TX_DISABLE;
-	else
-		data &= ~PORT_TX_DISABLE;
+		restart |= PORT_TX_DISABLE;
 	if (val & BMCR_ANRESTART)
-		data |= PORT_AUTO_NEG_RESTART;
-	else
-		data &= ~(PORT_AUTO_NEG_RESTART);
+		restart |= PORT_AUTO_NEG_RESTART;
 	if (val & BMCR_PDOWN)
-		data |= PORT_POWER_DOWN;
-	else
-		data &= ~PORT_POWER_DOWN;
+		restart |= PORT_POWER_DOWN;
 	if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
-		data |= PORT_AUTO_MDIX_DISABLE;
-	else
-		data &= ~PORT_AUTO_MDIX_DISABLE;
+		restart |= PORT_AUTO_MDIX_DISABLE;
 	if (val & KSZ886X_BMCR_FORCE_MDI)
-		data |= PORT_FORCE_MDIX;
-	else
-		data &= ~PORT_FORCE_MDIX;
+		restart |= PORT_FORCE_MDIX;
 	if (val & BMCR_LOOPBACK)
-		data |= PORT_PHY_LOOPBACK;
-	else
-		data &= ~PORT_PHY_LOOPBACK;
+		restart |= PORT_PHY_LOOPBACK;
 
-	if (data != restart) {
-		ret = ksz_pwrite8(dev, port, regs[P_NEG_RESTART_CTRL],
-				  data);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
+	return ksz_prmw8(dev, port, regs[P_NEG_RESTART_CTRL], restart_mask,
+			 restart);
 }
 
 int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
-- 
2.39.2