[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231121020558.240321-1-shaozhengchao@huawei.com>
Date: Tue, 21 Nov 2023 10:05:58 +0800
From: Zhengchao Shao <shaozhengchao@...wei.com>
To: <netdev@...r.kernel.org>, <davem@...emloft.net>, <dsahern@...nel.org>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>
CC: <weiyongjun1@...wei.com>, <yuehaibing@...wei.com>,
<shaozhengchao@...wei.com>
Subject: [PATCH net] ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
When I perform the following test operations:
1.ip link add br0 type bridge
2.brctl addif br0 eth0
3.ip addr add 239.0.0.1/32 dev eth0
4.ip addr add 239.0.0.1/32 dev br0
5.ip addr add 224.0.0.1/32 dev br0
6.while ((1))
do
ifconfig br0 up
ifconfig br0 down
done
7.send IGMPv2 query packets to port eth0 continuously. For example,
./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00
1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00"
The preceding tests may trigger the refcnt uaf isuue of the mc list. The
stack is as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate+0x78/0x110
CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #57
RIP: 0010:refcount_warn_saturate+0x78/0x110
Call Trace:
<TASK>
? __warn+0x83/0x130
? refcount_warn_saturate+0x78/0x110
? __report_bug+0xea/0x100
? report_bug+0x24/0x70
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
igmp_heard_query+0x221/0x690
igmp_rcv+0xea/0x2f0
ip_protocol_deliver_rcu+0x156/0x160
ip_local_deliver_finish+0x77/0xa0
__netif_receive_skb_one_core+0x8b/0xa0
netif_receive_skb_internal+0x80/0xd0
netif_receive_skb+0x18/0xc0
br_handle_frame_finish+0x340/0x5c0 [bridge]
nf_hook_bridge_pre+0x117/0x130 [bridge]
__netif_receive_skb_core+0x241/0x1090
__netif_receive_skb_list_core+0x13f/0x2e0
__netif_receive_skb_list+0xfc/0x190
netif_receive_skb_list_internal+0x102/0x1e0
napi_gro_receive+0xd7/0x220
e1000_clean_rx_irq+0x1d4/0x4f0 [e1000]
e1000_clean+0x5e/0xe0 [e1000]
__napi_poll+0x2c/0x1b0
net_rx_action+0x2cb/0x3a0
__do_softirq+0xcd/0x2a7
run_ksoftirqd+0x22/0x30
smpboot_thread_fn+0xdb/0x1d0
kthread+0xe2/0x110
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
The root causes are as follows:
Thread A Thread B
... netif_receive_skb
br_dev_stop ...
br_multicast_leave_snoopers ...
__ip_mc_dec_group ...
__igmp_group_dropped igmp_rcv
igmp_stop_timer igmp_heard_query //ref = 1
ip_ma_put igmp_mod_timer
refcount_dec_and_test igmp_start_timer //ref = 0
... refcount_inc //ref increases from 0
When the device receives an IGMPv2 Query message, it starts the timer
immediately, regardless of whether the device is running. If the device is
down and has left the multicast group, it will cause the mc list refcount
uaf issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@...wei.com>
---
net/ipv4/igmp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 76c3ea75b8dd..f217581904d6 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1044,6 +1044,8 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
for_each_pmc_rcu(in_dev, im) {
int changed;
+ if (!netif_running(im->interface->dev))
+ continue;
if (group && group != im->multiaddr)
continue;
if (im->multiaddr == IGMP_ALL_HOSTS)
--
2.34.1
Powered by blists - more mailing lists