| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231122101545.28819-5-ivecera@redhat.com>
Date: Wed, 22 Nov 2023 11:15:44 +0100
From: Ivan Vecera <ivecera@...hat.com>
To: intel-wired-lan@...ts.osuosl.org
Cc: Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
linux-kernel@...r.kernel.org,
Jacob Keller <jacob.e.keller@...el.com>,
Wojciech Drewek <wojciech.drewek@...el.com>,
Simon Horman <horms@...nel.org>,
mschmidt@...hat.com,
netdev@...r.kernel.org
Subject: [PATCH v4 4/5] i40e: Fix broken support for floating VEBs
Although the i40e supports so-called floating VEB (VEB without
an uplink connection to external network), this support is
broken. This functionality is currently unused (except debugfs)
but it will be used by subsequent series for switchdev mode
slow-path. Fix this by following:
1) Handle correctly floating VEB (VEB with uplink_seid == 0)
in i40e_reconstitute_veb() and look for owner VSI and
create it only for non-floating VEBs and also set bridge
mode only for such VEBs as the floating ones are using
always VEB mode.
2) Handle correctly floating VEB in i40e_veb_release() and
disallow its release when there are some VSIs. This is
different from regular VEB that have owner VSI that is
connected to VEB's uplink after VEB deletion by FW.
3) Fix i40e_add_veb() to handle 'vsi' that is NULL for floating
VEBs. For floating VEB use 0 for downlink SEID and 'true'
for 'default_port' parameters as per datasheet.
4) Fix 'add relay' command in i40e_dbg_command_write() to allow
to create floating VEB by 'add relay 0 0' or 'add relay'
Tested using debugfs:
1) Initial state
[root@...t net-next]# echo dump switch > $CMD
[root@...t net-next]# dmesg -c
[ 173.701286] i40e 0000:02:00.0: header: 3 reported 3 total
[ 173.706701] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 173.713241] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 173.719507] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
2) Add floating VEB
[root@...t net-next]# CMD="/sys/kernel/debug/i40e/0000:02:00.0/command"
[root@...t net-next]# echo add relay > $CMD
[root@...t net-next]# dmesg -c
[ 245.551720] i40e 0000:02:00.0: added relay 162
[root@...t net-next]# echo dump switch > $CMD
[root@...t net-next]# dmesg -c
[ 276.984371] i40e 0000:02:00.0: header: 4 reported 4 total
[ 276.989779] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 276.996302] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 277.002569] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
[ 277.009091] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
3) Add VMDQ2 VSI to this new VEB
[root@...t net-next]# echo add vsi 162 > $CMD
[root@...t net-next]# dmesg -c
[ 332.314030] i40e 0000:02:00.0: added VSI 394 to relay 162
[ 332.337486] enp2s0f0np0v0: NIC Link is Up, 40 Gbps Full Duplex, Flow Control: None
[root@...t net-next]# echo dump switch > $CMD
[root@...t net-next]# dmesg -c
[ 387.284490] i40e 0000:02:00.0: header: 5 reported 5 total
[ 387.289904] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 387.296446] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 387.302708] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 387.309234] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 387.315500] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
4) Try to delete the VEB
[root@...t net-next]# echo del relay 162 > $CMD
[root@...t net-next]# dmesg -c
[ 428.749297] i40e 0000:02:00.0: deleting relay 162
[ 428.754011] i40e 0000:02:00.0: can't remove VEB 162 with 1 VSIs left
5) Do PF reset and check switch status after rebuild
[root@...t net-next]# echo pfr > $CMD
[root@...t net-next]# echo dump switch > $CMD
[root@...t net-next]# dmesg -c
[ 738.056172] i40e 0000:02:00.0: header: 5 reported 5 total
[ 738.061577] i40e 0000:02:00.0: type=19 seid=394 uplink=162 downlink=16
[ 738.068104] i40e 0000:02:00.0: type=17 seid=162 uplink=0 downlink=0
[ 738.074367] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 738.080892] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 738.087160] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
6) Delete VSI and delete VEB
[root@...t net-next]# echo del vsi 394 > $CMD
[root@...t net-next]# echo del relay 162 > $CMD
[root@...t net-next]# echo dump switch > $CMD
[root@...t net-next]# dmesg -c
[ 1233.081126] i40e 0000:02:00.0: deleting VSI 394
[ 1239.345139] i40e 0000:02:00.0: deleting relay 162
[ 1244.886920] i40e 0000:02:00.0: header: 3 reported 3 total
[ 1244.892328] i40e 0000:02:00.0: type=19 seid=392 uplink=160 downlink=16
[ 1244.898853] i40e 0000:02:00.0: type=17 seid=160 uplink=2 downlink=0
[ 1244.905119] i40e 0000:02:00.0: type=19 seid=390 uplink=160 downlink=16
Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
Signed-off-by: Ivan Vecera <ivecera@...hat.com>
---
.../net/ethernet/intel/i40e/i40e_debugfs.c | 29 ++++---
drivers/net/ethernet/intel/i40e/i40e_main.c | 87 ++++++++++---------
2 files changed, 67 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 990a60889eef..921a97d5479e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -829,10 +829,14 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
} else if (strncmp(cmd_buf, "add relay", 9) == 0) {
struct i40e_veb *veb;
+ u8 enabled_tc = 0x1;
int uplink_seid;
cnt = sscanf(&cmd_buf[9], "%i %i", &uplink_seid, &vsi_seid);
- if (cnt != 2) {
+ if (cnt == 0) {
+ uplink_seid = 0;
+ vsi_seid = 0;
+ } else if (cnt != 2) {
dev_info(&pf->pdev->dev,
"add relay: bad command string, cnt=%d\n",
cnt);
@@ -844,23 +848,28 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
goto command_write_done;
}
- vsi = i40e_dbg_find_vsi(pf, vsi_seid);
- if (!vsi) {
- dev_info(&pf->pdev->dev,
- "add relay: VSI %d not found\n", vsi_seid);
- goto command_write_done;
- }
-
veb = i40e_pf_get_veb_by_seid(pf, uplink_seid);
if (!veb && uplink_seid != 0 && uplink_seid != pf->mac_seid) {
dev_info(&pf->pdev->dev,
"add relay: relay uplink %d not found\n",
uplink_seid);
goto command_write_done;
+ } else if (uplink_seid) {
+ vsi = i40e_pf_get_vsi_by_seid(pf, vsi_seid);
+ if (!vsi) {
+ dev_info(&pf->pdev->dev,
+ "add relay: VSI %d not found\n",
+ vsi_seid);
+ goto command_write_done;
+ }
+ enabled_tc = vsi->tc_config.enabled_tc;
+ } else if (vsi_seid) {
+ dev_info(&pf->pdev->dev,
+ "add relay: VSI must be 0 for floating relay\n");
+ goto command_write_done;
}
- veb = i40e_veb_setup(pf, 0, uplink_seid, vsi_seid,
- vsi->tc_config.enabled_tc);
+ veb = i40e_veb_setup(pf, 0, uplink_seid, vsi_seid, enabled_tc);
if (veb)
dev_info(&pf->pdev->dev, "added relay %d\n", veb->seid);
else
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 935c2460f060..e0f860be51be 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10379,41 +10379,48 @@ static int i40e_reconstitute_veb(struct i40e_veb *veb)
struct i40e_vsi *vsi;
int v, ret;
- /* build VSI that owns this VEB, temporarily attached to base VEB */
- i40e_pf_for_each_vsi(pf, v, vsi)
- if (vsi->veb_idx == veb->idx &&
- vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
- ctl_vsi = vsi;
- break;
+ if (veb->uplink_seid) {
+ /* Look for VSI that owns this VEB, temporarily attached to base VEB */
+ i40e_pf_for_each_vsi(pf, v, vsi)
+ if (vsi->veb_idx == veb->idx &&
+ vsi->flags & I40E_VSI_FLAG_VEB_OWNER) {
+ ctl_vsi = vsi;
+ break;
+ }
+
+ if (!ctl_vsi) {
+ dev_info(&pf->pdev->dev,
+ "missing owner VSI for veb_idx %d\n",
+ veb->idx);
+ ret = -ENOENT;
+ goto end_reconstitute;
}
+ if (ctl_vsi != pf->vsi[pf->lan_vsi])
+ ctl_vsi->uplink_seid =
+ pf->vsi[pf->lan_vsi]->uplink_seid;
- if (!ctl_vsi) {
- dev_info(&pf->pdev->dev,
- "missing owner VSI for veb_idx %d\n", veb->idx);
- ret = -ENOENT;
- goto end_reconstitute;
- }
- if (ctl_vsi != pf->vsi[pf->lan_vsi])
- ctl_vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
- ret = i40e_add_vsi(ctl_vsi);
- if (ret) {
- dev_info(&pf->pdev->dev,
- "rebuild of veb_idx %d owner VSI failed: %d\n",
- veb->idx, ret);
- goto end_reconstitute;
+ ret = i40e_add_vsi(ctl_vsi);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "rebuild of veb_idx %d owner VSI failed: %d\n",
+ veb->idx, ret);
+ goto end_reconstitute;
+ }
+ i40e_vsi_reset_stats(ctl_vsi);
}
- i40e_vsi_reset_stats(ctl_vsi);
/* create the VEB in the switch and move the VSI onto the VEB */
ret = i40e_add_veb(veb, ctl_vsi);
if (ret)
goto end_reconstitute;
- if (test_bit(I40E_FLAG_VEB_MODE_ENA, pf->flags))
- veb->bridge_mode = BRIDGE_MODE_VEB;
- else
- veb->bridge_mode = BRIDGE_MODE_VEPA;
- i40e_config_bridge_mode(veb);
+ if (veb->uplink_seid) {
+ if (test_bit(I40E_FLAG_VEB_MODE_ENA, pf->flags))
+ veb->bridge_mode = BRIDGE_MODE_VEB;
+ else
+ veb->bridge_mode = BRIDGE_MODE_VEPA;
+ i40e_config_bridge_mode(veb);
+ }
/* create the remaining VSIs attached to this VEB */
i40e_pf_for_each_vsi(pf, v, vsi) {
@@ -14716,29 +14723,29 @@ void i40e_veb_release(struct i40e_veb *veb)
/* find the remaining VSI and check for extras */
i40e_pf_for_each_vsi(pf, i, vsi_it)
if (vsi_it->uplink_seid == veb->seid) {
- vsi = vsi_it;
+ if (vsi_it->flags & I40E_VSI_FLAG_VEB_OWNER)
+ vsi = vsi_it;
n++;
}
- if (n != 1) {
+ /* Floating VEB has to be empty and regular one must have
+ * single owner VSI.
+ */
+ if ((veb->uplink_seid && n != 1) || (!veb->uplink_seid && n != 0)) {
dev_info(&pf->pdev->dev,
"can't remove VEB %d with %d VSIs left\n",
veb->seid, n);
return;
}
- /* move the remaining VSI to uplink veb */
- vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
+ /* For regular VEB move the owner VSI to uplink VEB */
if (veb->uplink_seid) {
+ vsi->flags &= ~I40E_VSI_FLAG_VEB_OWNER;
vsi->uplink_seid = veb->uplink_seid;
if (veb->uplink_seid == pf->mac_seid)
vsi->veb_idx = I40E_NO_VEB;
else
vsi->veb_idx = veb->veb_idx;
- } else {
- /* floating VEB */
- vsi->uplink_seid = pf->vsi[pf->lan_vsi]->uplink_seid;
- vsi->veb_idx = pf->vsi[pf->lan_vsi]->veb_idx;
}
i40e_aq_delete_element(&pf->hw, veb->seid, NULL);
@@ -14756,8 +14763,8 @@ static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
bool enable_stats = !!test_bit(I40E_FLAG_VEB_STATS_ENA, pf->flags);
int ret;
- ret = i40e_aq_add_veb(&pf->hw, veb->uplink_seid, vsi->seid,
- veb->enabled_tc, false,
+ ret = i40e_aq_add_veb(&pf->hw, veb->uplink_seid, vsi ? vsi->seid : 0,
+ veb->enabled_tc, vsi ? false : true,
&veb->seid, enable_stats, NULL);
/* get a VEB from the hardware */
@@ -14789,9 +14796,11 @@ static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi)
return -ENOENT;
}
- vsi->uplink_seid = veb->seid;
- vsi->veb_idx = veb->idx;
- vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
+ if (vsi) {
+ vsi->uplink_seid = veb->seid;
+ vsi->veb_idx = veb->idx;
+ vsi->flags |= I40E_VSI_FLAG_VEB_OWNER;
+ }
return 0;
}
--
2.41.0
Powered by blists - more mailing lists