| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <jl4f2ytl5dtclhaj46qt4xe6x75cxqbk4o2ei4a7djhrjpxbt5@lfjbph55y7ku>
Date: Fri, 24 Nov 2023 14:26:22 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Jianheng Zhang <Jianheng.Zhang@...opsys.com>
Cc: Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>, Jose Abreu <Jose.Abreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, Tan Tee Min <tee.min.tan@...el.com>,
Ong Boon Leong <boon.leong.ong@...el.com>, Voon Weifeng <weifeng.voon@...el.com>,
Mohammad Athari Bin Ismail <mohammad.athari.ismail@...el.com>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com" <linux-stm32@...md-mailman.stormreply.com>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
James Li <James.Li1@...opsys.com>, Martin McKenny <Martin.McKenny@...opsys.com>
Subject: Re: [PATCH] net: stmmac: fix FPE events losing
On Thu, Nov 23, 2023 at 02:46:11PM +0000, Jianheng Zhang wrote:
> > From: Serge Semin <fancer.lancer@...il.com>
> > Sent: Thursday, November 23, 2023 6:58 PM
> > To: Jianheng Zhang <jianheng@...opsys.com>
> > Cc: Russell King <linux@...linux.org.uk>; Alexandre Torgue <alexandre.torgue@...s.st.com>; Jose
> > Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> > <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>;
> > Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong Boon
> > Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad Athari Bin
> > Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > linux-kernel@...r.kernel.org; James Li <lijames@...opsys.com>; Martin McKenny
> > <mmckenny@...opsys.com>
> > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> >
> > On Thu, Nov 23, 2023 at 09:44:07AM +0000, Jianheng Zhang wrote:
> > > > From: Serge Semin <fancer.lancer@...il.com>
> > > > Sent: Wednesday, November 22, 2023 11:07 PM
> > > > To: Jianheng Zhang <jianheng@...opsys.com>
> > > > Cc: Russell King <linux@...linux.org.uk>; Alexandre Torgue <alexandre.torgue@...s.st.com>; Jose
> > > > Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> > > > <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>;
> > > > Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong
> > Boon
> > > > Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad Athari
> > Bin
> > > > Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > > linux-kernel@...r.kernel.org; James Li <lijames@...opsys.com>; Martin McKenny
> > > > <mmckenny@...opsys.com>
> > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > > >
> > > > On Wed, Nov 22, 2023 at 07:37:51AM +0000, Jianheng Zhang wrote:
> > > > > > From: Serge Semin <fancer.lancer@...il.com>
> > > > > > Sent: Tuesday, November 21, 2023 8:09 PM
> > > > > > To: Jianheng Zhang <jianheng@...opsys.com>
> > > > > > Cc: Russell King <linux@...linux.org.uk>; Alexandre Torgue <alexandre.torgue@...s.st.com>;
> > Jose
> > > > > > Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> > > > > > <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni
> > <pabeni@...hat.com>;
> > > > > > Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong
> > > > Boon
> > > > > > Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad
> > Athari
> > > > Bin
> > > > > > Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > > > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > > > > linux-kernel@...r.kernel.org; James Li <lijames@...opsys.com>
> > > > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > > > > >
> > > > > > On Tue, Nov 21, 2023 at 09:31:31AM +0000, Jianheng Zhang wrote:
> > > > > > > > From: Jianheng Zhang
> > > > > > > > Sent: Thursday, November 16, 2023 12:01 AM
> > > > > > > > To: Russell King <linux@...linux.org.uk>; Serge Semin <fancer.lancer@...il.com>
> > > > > > > > Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>; Jose Abreu
> > <joabreu@...opsys.com>;
> > > > David
> > > > > > S.
> > > > > > > > Miller <davem@...emloft.net>; Eric Dumazet <edumazet@...gle.com>; Jakub Kicinski
> > > > > > > > <kuba@...nel.org>; Paolo Abeni <pabeni@...hat.com>; Maxime Coquelin
> > > > > > > > <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>; Ong Boon Leong
> > > > > > > > <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>; Mohammad Athari
> > Bin
> > > > > > Ismail
> > > > > > > > <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > > > > > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > > > > > > linux-kernel@...r.kernel.org
> > > > > > > > Subject: RE: [PATCH] net: stmmac: fix FPE events losing
> > > > > > > >
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Russell King <linux@...linux.org.uk>
> > > > > > > > > Sent: Wednesday, November 15, 2023 10:26 PM
> > > > > > > > > To: Serge Semin <fancer.lancer@...il.com>
> > > > > > > > > Cc: Jianheng Zhang <jianheng@...opsys.com>; Alexandre Torgue
> > > > > > <alexandre.torgue@...s.st.com>;
> > > > > > > > Jose
> > > > > > > > > Abreu <joabreu@...opsys.com>; David S. Miller <davem@...emloft.net>; Eric Dumazet
> > > > > > > > > <edumazet@...gle.com>; Jakub Kicinski <kuba@...nel.org>; Paolo Abeni
> > > > <pabeni@...hat.com>;
> > > > > > > > > Maxime Coquelin <mcoquelin.stm32@...il.com>; Tan Tee Min <tee.min.tan@...el.com>;
> > Ong
> > > > > > Boon
> > > > > > > > > Leong <boon.leong.ong@...el.com>; Voon Weifeng <weifeng.voon@...el.com>;
> > Mohammad
> > > > > > Athari
> > > > > > > > Bin
> > > > > > > > > Ismail <mohammad.athari.ismail@...el.com>; netdev@...r.kernel.org;
> > > > > > > > > linux-stm32@...md-mailman.stormreply.com; linux-arm-kernel@...ts.infradead.org;
> > > > > > > > > linux-kernel@...r.kernel.org
> > > > > > > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing
> > > > > > > > >
> > > > > > > > > On Tue, Nov 14, 2023 at 02:59:57PM +0300, Serge Semin wrote:
> > > > > > > > > > On Tue, Nov 14, 2023 at 11:07:34AM +0000, Jianheng Zhang wrote:
> > > > > > > > > > > The 32-bit access of register MAC_FPE_CTRL_STS may clear the FPE status
> > > > > > > > > > > bits unexpectedly. Use 8-bit access for MAC_FPE_CTRL_STS control bits to
> > > > > > > > > > > avoid unexpected access of MAC_FPE_CTRL_STS status bits that can reduce
> > > > > > > > > > > the FPE handshake retries.
> > > > > > > > > > >
> > > > > > > > > > > The bit[19:17] of register MAC_FPE_CTRL_STS are status register bits.
> > > > > > > > > > > Those bits are clear on read (or write of 1 when RCWE bit in
> > > > > > > > > > > MAC_CSR_SW_Ctrl register is set). Using 32-bit access for
> > > > > > > > > > > MAC_FPE_CTRL_STS control bits makes side effects that clear the status
> > > > > > > > > > > bits. Then the stmmac interrupt handler missing FPE event status and
> > > > > > > > > > > leads to FPE handshake failure and retries.
> > > > > > > > > > >
> > > > > > > > > > > The bit[7:0] of register MAC_FPE_CTRL_STS are control bits or reserved
> > > > > > > > > > > that have no access side effects, so can use 8-bit access for
> > > > > > > > > > > MAC_FPE_CTRL_STS control bits.
> > > > > > > > > > >
> > > > > > > > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
> > > > > > > > > > > Signed-off-by: jianheng <jianheng@...opsys.com>
> > > > > > > > > > > ---
> > > > > > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 12 ++++++------
> > > > > > > > > > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > > > > > > > > > >
> > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > > > > > index e95d35f..7333995 100644
> > > > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > > > > > @@ -716,11 +716,11 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32
> > > > num_txq,
> > > > > > u32
> > > > > > > > > num_rxq,
> > > > > > > > > > > u32 value;
> > > > > > > > > > >
> > > > > > > > > > > if (!enable) {
> > > > > > > > > >
> > > > > > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > > > > > > + value = readb(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > > > > >
> > > > > > > > > > Note this may break the platforms which don't support non-32 MMIOs for
> > > > > > > > > > some devices. None of the currently supported glue-drivers explicitly
> > > > > > > > > > state they have such peculiarity, but at the same time the STMMAC-core
> > > > > > > > > > driver at the present state uses the dword IO ops only. For instance
> > > > > > > > > > the PCIe subsystem has the special accessors for such cases:
> > > > > > > > > > pci_generic_config_read32()
> > > > > > > > > > pci_generic_config_write32()
> > > > > > > > > > which at the very least are utilized on the Tegra and Loongson
> > > > > > > > > > platforms to access the host CSR spaces. These platforms are also
> > > > > > > > > > equipped with the DW MACs. The problem might be irrelevant for all the
> > > > > > > > > > currently supported DW MAC controllers implementations though, but
> > > > > > > > > > still it worth to draw an attention to the problem possibility and in
> > > > > > > > > > order to prevent it before ahead it would be better to just avoid
> > > > > > > > > > using the byte-/word- IOs if it's possible.
> > > > > > > > >
> > > > > > > > > Yes, this exists for configuration accesses, and is damn annoying
> > > > > > > > > because the read-modify-write of these can end up clearing PCI
> > > > > > > > > status register bits that are W1C.
> > > > > > > > >
> > > > > > > > > I've never heard of that problem with MMIO though.
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > RMK's Patch system:
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > https://urldefense.com/v3/__https://www.armlinux.org.uk/developer/patches/__;!!A4F2R9G_pg!ZnsQc
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > >
> > 7LKbdCiIj_nLBkt44MRSL8W8YD4WvMmPNkHFlDMrjrVqEVOVA1-P-9BVE3Oa5bC1ymKXLNV5C9mJ_rfFtLW
> > > > > > > > > Fg$
> > > > > > > > > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
> > > > > > > > Thanks for all your mention about the potential risks of using readb and suggestions, I'll
> > consider a
> > > > > > new
> > > > > > > > solution and update the patch.
> > > > > > > >
> > > > > > > > Best Regards,
> > > > > > > > Jianheng
> > > > > > >
> > > > > > > Thanks for Andrew's suggestion. I consider the solution of set
> > > > > > > MAC_CSR_SW_Ctrl.RCWE carefully and found that the MAC_CSR_SW_Ctrl.RCWE
> > > > > > > is efficient for many other interrupt status registers, and some are used
> > > > > > > in current stmmac driver (LPI PMT MMC etc). Those registers work fine in
> > > > > > > clear on read mode with current code. So, I think there is no need to
> > > > > > > set MAC_CSR_SW_Ctrl.RCWE that will make a large impact to current
> > > > > > > interrupt handler.
> > > > > > >
> > > > > > > I try adding a new member variable(staged_fpe_state) to stmmac_fpe_cfg
> > > > > > > that is used to stage the MAC_FPE_CTRL_STS value read in
> > > > > > > dwmac5_fpe_send_mpacket(). And in dwmac5_fpe_irq_status(), use this staged
> > > > > > > value and current value of MAC_FPE_CTRL_STS to check FPE status. The
> > > > > > > draft patch is below.
> > > > > >
> > > > > > Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> > > > > > _writes_? (I am asking because for some reason my DW QoS Eth v5.10a HW
> > > > > > manual has the status MAC_FPE_CTRL_STS flags marked as R/W, which is
> > > > > > weird access mode for the status flags.) If they turn to be _not_
> > > > > > changeable on writes, then what about just converting the
> > > > > > dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> > > > > > writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> > > > > > shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> > > > > > AFAICS the only flag which needs to be preserved is EFPE - "enable
> > > > > > FPE" flag.
> > > > > >
> > > > > > Such implementation (if it's possible) shall be free from the _status_
> > > > > > flags race condition and won't require additional serializations. On
> > > > > > the contrary your suggestion AFAICS causes unresolved race condition
> > > > > > in here
> > > > > >
> > > > > > > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > > > > > > + fpe_cfg->staged_fpe_state = 0x0;
> > > > > >
> > > > > > and here
> > > > > >
> > > > > > > value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > > + cfg->staged_fpe_state = value;
> > > > > >
> > > > > > Depending on the IRQ handling and the task scheduling timing you may
> > > > > > end up with loosing the status flags anyway.
> > > > > >
> > > > > > * Note I am not concerning here the MAC_FPE_CTRL_STS control flags
> > > > > > * race condition which AFAICS already exist in the current frame
> > > > > > * preemption code. See the configs performed in the open/close/suspend
> > > > > > * methods, in the link state change callbacks, in the worker task and
> > > > > > * in the FPE status IRQ handler. Control flag accesses don't look
> > > > > > * coherent there.
> > > > > >
> > > > > > -Serge(y)
> > > > > >
> > > > > > >
> > > > > > > Best Regards,
> > > > > > > Jianheng
> > > > > > >
> > > > > > > [PATCH v2] net: stmmac: fix FPE events losing
> > > > > > >
> > > > > > > ---
> > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 9 +++++++--
> > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 1 +
> > > > > > > drivers/net/ethernet/stmicro/stmmac/hwif.h | 1 +
> > > > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++-
> > > > > > > include/linux/stmmac.h | 1 +
> > > > > > > 5 files changed, 15 insertions(+), 3 deletions(-)
> > > > > > >
> > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > index e95d35f..8917fd0 100644
> > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > > > @@ -736,12 +736,15 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq,
> > u32
> > > > > > num_rxq,
> > > > > > >
> > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> > > > > > > {
> > > > > > > + struct stmmac_priv *priv = netdev_priv(dev);
> > > > > > > + struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
> > > > > > > u32 value;
> > > > > > > int status;
> > > > > > >
> > > > > > > status = FPE_EVENT_UNKNOWN;
> > > > > > >
> > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state;
> > > > > > > + fpe_cfg->staged_fpe_state = 0x0;
> > > > > > >
> > > > > > > if (value & TRSP) {
> > > > > > > status |= FPE_EVENT_TRSP;
> > > > > > > @@ -766,11 +769,13 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device
> > > > *dev)
> > > > > > > return status;
> > > > > > > }
> > > > > > >
> > > > > > > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> > > > > > > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > > > + enum stmmac_mpacket_type type)
> > > > > > > {
> > > > > > > u32 value;
> > > > > > >
> > > > > > > value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > > > + cfg->staged_fpe_state = value;
> > > > > > >
> > > > > > > if (type == MPACKET_VERIFY) {
> > > > > > > value &= ~SRSP;
> > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > > > index 53c138d..022c1a2 100644
> > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > > > @@ -156,6 +156,7 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device
> > > > *dev,
> > > > > > > void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > > > > > > bool enable);
> > > > > > > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> > > > > > > + struct stmmac_fpe_cfg *cfg,
> > > > > > > enum stmmac_mpacket_type type);
> > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
> > > > > > >
> > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > > b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > > > index b95d3e1..5496781 100644
> > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > > > @@ -415,6 +415,7 @@ struct stmmac_ops {
> > > > > > > void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > > > > > > bool enable);
> > > > > > > void (*fpe_send_mpacket)(void __iomem *ioaddr,
> > > > > > > + struct stmmac_fpe_cfg *cfg,
> > > > > > > enum stmmac_mpacket_type type);
> > > > > > > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> > > > > > > };
> > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > > > index 3e50fd5..6a29f55 100644
> > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > > > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv,
> > bool
> > > > > > is_up)
> > > > > > > bool *hs_enable = &fpe_cfg->hs_enable;
> > > > > > >
> > > > > > > if (is_up && *hs_enable) {
> > > > > > > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> > > > > > > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> > > > > > > + MPACKET_VERIFY);
> > > > > > > } else {
> > > > > > > *lo_state = FPE_STATE_OFF;
> > > > > > > *lp_state = FPE_STATE_OFF;
> > > > > > > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int
> > > > status)
> > > > > > > /* If user has requested FPE enable, quickly response */
> > > > > > > if (*hs_enable)
> > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > > > + fpe_cfg,
> > > > > > > MPACKET_RESPONSE);
> > > > > > > }
> > > > > > >
> > > > > > > @@ -7280,6 +7282,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> > > > > > > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> > > > > > > *lo_state, *lp_state);
> > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > > > + fpe_cfg,
> > > > > > > MPACKET_VERIFY);
> > > > > > > }
> > > > > > > /* Sleep then retry */
> > > > > > > @@ -7294,6 +7297,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> > > > > > > if (priv->plat->fpe_cfg->hs_enable != enable) {
> > > > > > > if (enable) {
> > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > > > + priv->plat->fpe_cfg,
> > > > > > > MPACKET_VERIFY);
> > > > > > > } else {
> > > > > > > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> > > > > > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > > > > > > index 0b4658a..1322c78 100644
> > > > > > > --- a/include/linux/stmmac.h
> > > > > > > +++ b/include/linux/stmmac.h
> > > > > > > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> > > > > > > bool hs_enable; /* FPE handshake enable */
> > > > > > > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
> > > > > > > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
> > > > > > > + u32 staged_fpe_state; /* Staged FPE state when read MAC_FPE_CTRL_STS */
> > > > > > > };
> > > > > > >
> > > > > > > struct stmmac_safety_feature_cfg {
> > > > > > > --
> > > > > > > 1.8.3.1
> > > > > > >
> > > > >
> > > > > Hi Serge,
> > > > >
> > > > > Thanks for your suggestion.
> > > > >
> > > > > > Are the status flags in the MAC_FPE_CTRL_STS register cleared on
> > > > > > _writes_?
> > > >
> > > > > A write of 0 has no impact irrespective of the value programmed in RCWE bit.
> > > > > This is safe option when writing the MAC_FPE_CTRL_STS register, which will
> > > > > ensure that bits[19:16] are not modified unintentionally.
> > > > > When RCWE bit is 0 and status bits[19:16] are read, those will be cleared, a write
> > > > > of 0 or 1 do not have any impact in this mode.
> > > >
> > > > Great! Than always writing shall do the trick.
> > > >
> > > > >
> > > > > > then what about just converting the
> > > > > > dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always
> > > > > > writing to the MAC_FPE_CTRL_STS register, and if required preserve the
> > > > > > shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure?
> > > > > > AFAICS the only flag which needs to be preserved is EFPE - "enable
> > > > > > FPE" flag.
> > > >
> > > > > I think this is a good solution, pls check my draft patch below.
> > > >
> > > > Some comments are below.
> > > >
> > > > >
> > > > > -Jianheng
> > > > >
> > > > > [PATCH v2] net: stmmac: fix FPE events losing
> > > > >
> > > > > ---
> > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 26 +++++++++-------------
> > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 +++-
> > > > > .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 ++-
> > > > > drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +++-
> > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++-
> > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 +
> > > > > include/linux/stmmac.h | 1 +
> > > > > 7 files changed, 28 insertions(+), 19 deletions(-)
> > > > >
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > index e95d35f..9575e84 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> > > > > @@ -710,17 +710,15 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device
> > *dev,
> > > > > }
> > > > > }
> > > > >
> > > > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > > > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > + u32 num_txq, u32 num_rxq,
> > > > > bool enable)
> > > > > {
> > > >
> > > > > u32 value;
> > > > >
> > > > > if (!enable) {
> > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > -
> > > > > - value &= ~EFPE;
> > > > > -
> > > > > - writel(value, ioaddr + MAC_FPE_CTRL_STS);
> > > > > + writel(0x0, ioaddr + MAC_FPE_CTRL_STS);
> > > > > + cfg->fpe_ctrl_sts_shadow = 0x0;
> > > > > return;
> > > > > }
> > > > >
> > > > > @@ -729,9 +727,9 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32
> > > > num_rxq,
> > > > > value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
> > > > > writel(value, ioaddr + GMAC_RXQ_CTRL1);
> > > > >
> > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > - value |= EFPE;
> > > >
> > > > > + value = EFPE;
> > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS);
> > > > > + cfg->fpe_ctrl_sts_shadow = EFPE;
> > > >
> > > > What about just:
> > > > if (enable)
> > > > cfg->fpe_csr = EFPE;
> > > > else
> > > > cfg->fpe_csr = 0;
> > > >
> > > > writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
> > > >
> > > > then ...
> > > >
> > > > > }
> > > > >
> > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> > > > > @@ -766,19 +764,17 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device
> > *dev)
> > > > > return status;
> > > > > }
> > > > >
> > > > > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> > > > > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > + enum stmmac_mpacket_type type)
> > > > > {
> > > >
> > > > > u32 value;
> > > > >
> > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> > > > > + value = cfg->fpe_ctrl_sts_shadow;
> > > > >
> > > > > - if (type == MPACKET_VERIFY) {
> > > > > - value &= ~SRSP;
> > > > > + if (type == MPACKET_VERIFY)
> > > > > value |= SVER;
> > > > > - } else {
> > > > > - value &= ~SVER;
> > > > > + else
> > > > > value |= SRSP;
> > > > > - }
> > > > >
> > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS);
> > > >
> > > > this can be replaced with
> > > >
> > > > u32 value = cfg->fpe_csr;
> > > >
> > > > if (type == MPACKET_VERIFY)
> > > > value |= SVER;
> > > > else if (type == MPACKET_RESPONSE)
> > > > value |= SRSP;
> > > >
> > > > writel(value, ioaddr + MAC_FPE_CTRL_STS);
> > > >
> > > > > }
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > index 53c138d..aca846d 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> > > > > @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est
> > *cfg,
> > > > > unsigned int ptp_rate);
> > > > > void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> > > > > struct stmmac_extra_stats *x, u32 txqcnt);
> > > > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > > > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > + u32 num_txq, u32 num_rxq,
> > > > > bool enable);
> > > > > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> > > > > + struct stmmac_fpe_cfg *cfg,
> > > > > enum stmmac_mpacket_type type);
> > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
> > > > >
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > > > > index 453e88b..a74e71d 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> > > > > @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct
> > > > stmmac_est *cfg,
> > > > > return 0;
> > > > > }
> > > > >
> > > > > -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
> > > > > +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > + u32 num_txq,
> > > > > u32 num_rxq, bool enable)
> > > > > {
> > > > > u32 value;
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > index b95d3e1..68aa2d5 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> > > > > @@ -412,9 +412,11 @@ struct stmmac_ops {
> > > > > unsigned int ptp_rate);
> > > > > void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
> > > > > struct stmmac_extra_stats *x, u32 txqcnt);
> > > > > - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> > > > > + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> > > > > + u32 num_txq, u32 num_rxq,
> > > > > bool enable);
> > > > > void (*fpe_send_mpacket)(void __iomem *ioaddr,
> > > > > + struct stmmac_fpe_cfg *cfg,
> > > > > enum stmmac_mpacket_type type);
> > > > > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> > > > > };
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > index 3e50fd5..7791e9b 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > > > > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool
> > > > is_up)
> > > > > bool *hs_enable = &fpe_cfg->hs_enable;
> > > > >
> > > > > if (is_up && *hs_enable) {
> > > > > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> > > > > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> > > > > + MPACKET_VERIFY);
> > > > > } else {
> > > > > *lo_state = FPE_STATE_OFF;
> > > > > *lp_state = FPE_STATE_OFF;
> > > > > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int
> > status)
> > > > > /* If user has requested FPE enable, quickly response */
> > > > > if (*hs_enable)
> > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > + fpe_cfg,
> > > > > MPACKET_RESPONSE);
> > > > > }
> > > > >
> > > > > @@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> > > > > if (*lo_state == FPE_STATE_ENTERING_ON &&
> > > > > *lp_state == FPE_STATE_ENTERING_ON) {
> > > > > stmmac_fpe_configure(priv, priv->ioaddr,
> > > > > + fpe_cfg,
> > > > > priv->plat->tx_queues_to_use,
> > > > > priv->plat->rx_queues_to_use,
> > > > > *enable);
> > > > > @@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> > > > > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> > > > > *lo_state, *lp_state);
> > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > + fpe_cfg,
> > > > > MPACKET_VERIFY);
> > > > > }
> > > > > /* Sleep then retry */
> > > > > @@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> > > > > if (priv->plat->fpe_cfg->hs_enable != enable) {
> > > > > if (enable) {
> > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> > > > > + priv->plat->fpe_cfg,
> > > > > MPACKET_VERIFY);
> > > > > } else {
> > > > > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> > > > > @@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev)
> > > > > if (priv->dma_cap.fpesel) {
> > > > > /* Disable FPE */
> > > > > stmmac_fpe_configure(priv, priv->ioaddr,
> > > > > + priv->plat->fpe_cfg,
> > > > > priv->plat->tx_queues_to_use,
> > > > > priv->plat->rx_queues_to_use, false);
> > > > >
> > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> > > > > index ac41ef4..6ad3e0a 100644
> > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> > > > > @@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
> > > > >
> > > > > priv->plat->fpe_cfg->enable = false;
> > > > > stmmac_fpe_configure(priv, priv->ioaddr,
> > > > > + priv->plat->fpe_cfg,
> > > > > priv->plat->tx_queues_to_use,
> > > > > priv->plat->rx_queues_to_use,
> > > > > false);
> > > > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > > > > index 0b4658a..48385c7 100644
> > > > > --- a/include/linux/stmmac.h
> > > > > +++ b/include/linux/stmmac.h
> > > > > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> > > > > bool hs_enable; /* FPE handshake enable */
> > > > > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
> > > > > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
> > > >
> > > > > + u32 fpe_ctrl_sts_shadow; /* shadow of MAC_FPE_CTRL_STS */
> > > >
> > > > + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */
> > > >
> > > > I would have had it named as "fpe_csr" - short and well readable
> > > > especially seeing CSR is a well known abbreviation for Control and
> > > > Status register, which the MAC_FPE_CTRL_STS register actually is.
> > > >
> > > > * Note one more time: current FPE handshaking implementation is vastly
> > > > clumsy, needlessly overcomplicated and prone to races. I would have
> > > > seriously considered having it refactored.
> > > >
> > > > -Serge(y)
> > > >
> > > > > };
> > > > >
> > > > > struct stmmac_safety_feature_cfg {
> > > > > --
> > > > > 1.8.3.1
> > > > >
> > >
> > > Hi Sergeļ¼
> > >
> >
> > > Thanks for your comments and for pointing out the defects of the current FPE
> > > handshaking implementation. I know that my patch cannot solve all the
> > > defects of the current FPE handshaking. So, I want to know if it is necessary
> > > that I continue submitting this patch if you want to refactor the FPE
> > > handshaking further.
> >
> > Your patch solves one of the issues the FPE code has. So please feel
> > free to submit it.
> >
> > Regarding the FPE handshaking refactoring. I would have been glad to
> > do that if I had an FPE-capable device (alas my DW XGMAC device is of
> > v2.10a revision and couldn't have been even possibly equipped with
> > FPE), otherwise providing a not properly debugged/tested patch(es) we
> > may end up with just not working feature. In anyway it's not a reason
> > for you to stop fixing some other issues in the implementation. I just
> > noted that the current code has some other ones, which may bite the
> > users very hard in very unexpected points.
> >
> > > Moreover, I want to add FPE handshaking support for DW
> > > XGMAC (add fpe_send_mpacket() & fpe_irq_status() to dwxlgmac2_core.c) after
> > > fixing this MAC_FPE_CTRL_STS register read issue.
> >
> > Why not. Got ahead please. We'll have it reviewed.
> >
> > -Serge(y)
> >
> > >
> > > -Jianheng
>
> Hi Serge,
>
> That is great, pls help to check my patch update below.
> Thanks,
Please submit v2 patch in a normal way already. I'll give you my
comments there, if any.
One more note regarding the change. Please add a comment to the
dwmac5_fpe_irq_status() method above the readl() line that it's the
only place eligible to perform the reads from the MAC_FPE_CTRL_STS
register due to the problem you discovered.
-Serge(y)
>
> -Jianheng
>
> [PATCH v2] net: stmmac: fix FPE events losing
>
> The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
> 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
> dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
> handler missing FPE event status and leads to FPE handshaking failure and
> retries.
> To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
> and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
> cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
> MAC_FPE_CTRL_STS in those methods.
>
> Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure")
> Signed-off-by: jianheng <jianheng@...opsys.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 42 +++++++++-------------
> drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 ++-
> .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 +-
> drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 ++-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++-
> drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 +
> include/linux/stmmac.h | 1 +
> 7 files changed, 33 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> index e95d35f..53909dc 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
> @@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> }
> }
>
> -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + u32 num_txq, u32 num_rxq,
> bool enable)
> {
> u32 value;
>
> - if (!enable) {
> - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> -
> - value &= ~EFPE;
> -
> - writel(value, ioaddr + MAC_FPE_CTRL_STS);
> - return;
> + if (enable) {
> + cfg->fpe_csr = EFPE;
> + value = readl(ioaddr + GMAC_RXQ_CTRL1);
> + value &= ~GMAC_RXQCTRL_FPRQ;
> + value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
> + writel(value, ioaddr + GMAC_RXQ_CTRL1);
> + } else {
> + cfg->fpe_csr = 0;
> }
> -
> - value = readl(ioaddr + GMAC_RXQ_CTRL1);
> - value &= ~GMAC_RXQCTRL_FPRQ;
> - value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
> - writel(value, ioaddr + GMAC_RXQ_CTRL1);
> -
> - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> - value |= EFPE;
> - writel(value, ioaddr + MAC_FPE_CTRL_STS);
> + writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
> }
>
> int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> @@ -766,19 +760,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
> return status;
> }
>
> -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type)
> +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + enum stmmac_mpacket_type type)
> {
> - u32 value;
> + u32 value = cfg->fpe_csr;
>
> - value = readl(ioaddr + MAC_FPE_CTRL_STS);
> -
> - if (type == MPACKET_VERIFY) {
> - value &= ~SRSP;
> + if (type == MPACKET_VERIFY)
> value |= SVER;
> - } else {
> - value &= ~SVER;
> + else if (type == MPACKET_RESPONSE)
> value |= SRSP;
> - }
>
> writel(value, ioaddr + MAC_FPE_CTRL_STS);
> }
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> index 53c138d..34e6207 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
> @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
> unsigned int ptp_rate);
> void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev,
> struct stmmac_extra_stats *x, u32 txqcnt);
> -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + u32 num_txq, u32 num_rxq,
> bool enable);
> void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
> + struct stmmac_fpe_cfg *cfg,
> enum stmmac_mpacket_type type);
> int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> index 453e88b..a74e71d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
> @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg,
> return 0;
> }
>
> -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq,
> +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + u32 num_txq,
> u32 num_rxq, bool enable)
> {
> u32 value;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> index b95d3e1..68aa2d5 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
> @@ -412,9 +412,11 @@ struct stmmac_ops {
> unsigned int ptp_rate);
> void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev,
> struct stmmac_extra_stats *x, u32 txqcnt);
> - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq,
> + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
> + u32 num_txq, u32 num_rxq,
> bool enable);
> void (*fpe_send_mpacket)(void __iomem *ioaddr,
> + struct stmmac_fpe_cfg *cfg,
> enum stmmac_mpacket_type type);
> int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
> };
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 3e50fd5..7791e9b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
> bool *hs_enable = &fpe_cfg->hs_enable;
>
> if (is_up && *hs_enable) {
> - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY);
> + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
> + MPACKET_VERIFY);
> } else {
> *lo_state = FPE_STATE_OFF;
> *lp_state = FPE_STATE_OFF;
> @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
> /* If user has requested FPE enable, quickly response */
> if (*hs_enable)
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + fpe_cfg,
> MPACKET_RESPONSE);
> }
>
> @@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> if (*lo_state == FPE_STATE_ENTERING_ON &&
> *lp_state == FPE_STATE_ENTERING_ON) {
> stmmac_fpe_configure(priv, priv->ioaddr,
> + fpe_cfg,
> priv->plat->tx_queues_to_use,
> priv->plat->rx_queues_to_use,
> *enable);
> @@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
> netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
> *lo_state, *lp_state);
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + fpe_cfg,
> MPACKET_VERIFY);
> }
> /* Sleep then retry */
> @@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
> if (priv->plat->fpe_cfg->hs_enable != enable) {
> if (enable) {
> stmmac_fpe_send_mpacket(priv, priv->ioaddr,
> + priv->plat->fpe_cfg,
> MPACKET_VERIFY);
> } else {
> priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
> @@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev)
> if (priv->dma_cap.fpesel) {
> /* Disable FPE */
> stmmac_fpe_configure(priv, priv->ioaddr,
> + priv->plat->fpe_cfg,
> priv->plat->tx_queues_to_use,
> priv->plat->rx_queues_to_use, false);
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> index ac41ef4..6ad3e0a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
> @@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv,
>
> priv->plat->fpe_cfg->enable = false;
> stmmac_fpe_configure(priv, priv->ioaddr,
> + priv->plat->fpe_cfg,
> priv->plat->tx_queues_to_use,
> priv->plat->rx_queues_to_use,
> false);
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 0b4658a..dee5ad6 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg {
> bool hs_enable; /* FPE handshake enable */
> enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */
> enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */
> + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */
> };
>
> struct stmmac_safety_feature_cfg {
> --
> 1.8.3.1
>
>
Powered by blists - more mailing lists