netdev - Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet PHY package nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <367c0aea-b110-4e3f-a161-59d27db11188@quicinc.com>
Date: Fri, 24 Nov 2023 19:49:27 +0800
From: Jie Luo <quic_luoj@...cinc.com>
To: Christian Marangi <ansuelsmth@...il.com>, Andrew Lunn <andrew@...n.ch>
CC: "Russell King (Oracle)" <linux@...linux.org.uk>,
        Rob Herring
	<robh@...nel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni
	<pabeni@...hat.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, Andy Gross <agross@...nel.org>,
        Bjorn
 Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Florian Fainelli
	<florian.fainelli@...adcom.com>,
        Broadcom internal kernel review list
	<bcm-kernel-feedback-list@...adcom.com>,
        Daniel Golle
	<daniel@...rotopia.org>,
        Qingfang Deng <dqfext@...il.com>,
        SkyLake Huang
	<SkyLake.Huang@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
        David
 Epping <david.epping@...singlinkelectronics.com>,
        Vladimir Oltean
	<olteanv@...il.com>,
        Harini Katakam <harini.katakam@....com>,
        Simon Horman
	<horms@...nel.org>,
        Robert Marko <robert.marko@...tura.hr>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>
Subject: Re: [net-next RFC PATCH 03/14] dt-bindings: net: document ethernet
 PHY package nodes



On 11/24/2023 3:33 AM, Christian Marangi wrote:
> On Thu, Nov 23, 2023 at 03:57:58PM +0100, Andrew Lunn wrote:
>> On Thu, Nov 23, 2023 at 02:35:31PM +0000, Russell King (Oracle) wrote:
>>> On Thu, Nov 23, 2023 at 03:27:05PM +0100, Andrew Lunn wrote:
>>>>> Just to be more precise qca807x can operate in 3 different mode:
>>>>> (this is controlled by the MODE_CFG bits)
>>>>
>>>>> - QSGMII: 5 copper port
>>>>
>>>> 4 slots over QSGMII, plus the second SERDES is connected to the MAC
>>>> using SGMII/1000BaseX?
>>>>
>>>>> - PSGMII: 5 copper port
>>>>
>>>> 5 slots over QSGMII, the second SERDES is idle?
>>>>
>>>>> - PSGMII: 4 copper port + 1 combo (that can be both fiber or copper)
>>>>
>>>> 5 slots over QSGMII, with the second SERDES connected to an SFP cage.
>>>>
>>>> Are ports 1-4 always connected to the P/Q SGMII. Its only port 5 which
>>>> can use the second SERDES?
>>>
>>> I think what would really help here is if there was an ascii table to
>>> describe the configurations, rather than trying to put it into words.
>>
>> Yes.
>>
>> And also for ipq4019. We need to merge these two threads of
>> conversation, since in the end they are probably the same driver, same
>> device tree etc.
>>
> 
> For everyone that missed Robert response in patch 12 let me quote him
> also here.
> 
> "
> Hi Andrew,
> I think that the description is confusing.
> QCA807x supports 3 different modes:
> 1. PSGMII (5 copper ports)
> 2. PSGMII (4 copper ports + 1 combo port)
> 3. QSGMII+SGMII
> 
> So, in case option 2 is selected then the combo port can also be used for
> 1000Base-X and 100Base-FX modules or copper and it will autodetect the
> exact media.
> This is supported via the SFP op-s and I have been using it without issues
> for a while.
> 
> I have not tested option 3 in combination with SFP to the copper
> module so I cant
> say whether that works.

For the option3, the last PHY works on SGMII mode, then it can't be
used with SFP, only copper is supported in this mode.

>  From what I can gather from the typical usage examples in the
> datasheet, this QSMII+SGMII
> mode is basically intended as a backward compatibility thing as only
> QCA SoC-s have PSGMII
> support so that you could still use SoC-s with QSGMII and SGMII support only.
> 
> So there is no way to control the SerDes-es individually, only the
> global mode can be changed via
> the Chip configuration register in the Combo port.
> 
> You can see the block diagram of this PHY in this public PDF on page 2[1].
> 
> [1] https://content.codico.com/fileadmin/media/download/datasheets/qualcomm/qualcomm_qca8075.pdf
> "
>