[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1r6VHv-00DDLZ-OL@rmk-PC.armlinux.org.uk>
Date: Fri, 24 Nov 2023 12:28:03 +0000
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Jakub Kicinski <kuba@...nel.org>,
Marek BehĂșn <kabel@...nel.org>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>,
"Marek Beh__n" <kabel@...nel.org>
Subject: [PATCH net-next 03/10] net: phy: marvell10g: fill in
possible_interfaces
Fill in the possible_interfaces member according to the selected
mactype mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/phy/marvell10g.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index a880b3375dee..ad43e280930c 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -803,6 +803,22 @@ static const struct mv3310_mactype mv3340_mactypes[] = {
},
};
+static void mv3310_fill_possible_interfaces(struct phy_device *phydev)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ unsigned long *possible = phydev->possible_interfaces;
+ const struct mv3310_mactype *mactype = priv->mactype;
+
+ if (mactype->interface_10g != PHY_INTERFACE_MODE_NA)
+ __set_bit(priv->mactype->interface_10g, possible);
+
+ if (!mactype->fixed_interface) {
+ __set_bit(PHY_INTERFACE_MODE_5GBASER, possible);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, possible);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, possible);
+ }
+}
+
static int mv3310_config_init(struct phy_device *phydev)
{
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
@@ -845,6 +861,8 @@ static int mv3310_config_init(struct phy_device *phydev)
priv->mactype = &chip->mactypes[mactype];
+ mv3310_fill_possible_interfaces(phydev);
+
/* Enable EDPD mode - saving 600mW */
err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
if (err)
--
2.30.2
Powered by blists - more mailing lists