| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231124092736.3673263-13-liuhangbin@gmail.com>
Date: Fri, 24 Nov 2023 17:27:10 +0800
From: Hangbin Liu <liuhangbin@...il.com>
To: netdev@...r.kernel.org
Cc: "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Shuah Khan <shuah@...nel.org>,
David Ahern <dsahern@...nel.org>,
linux-kselftest@...r.kernel.org,
Po-Hsu Lin <po-hsu.lin@...onical.com>,
Guillaume Nault <gnault@...hat.com>,
Björn Töpel <bjorn@...osinc.com>,
Ryan Roberts <ryan.roberts@....com>,
Andrew Morton <akpm@...ux-foundation.org>,
Mark Brown <broonie@...nel.org>,
Luis Chamberlain <mcgrof@...nel.org>,
Hangbin Liu <liuhangbin@...il.com>
Subject: [PATCH net-next 12/38] selftests/net: convert fib_tests.sh to run it in unique namespace
Here is the test result after conversion.
]# ./fib_tests.sh
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
...
Fib6 garbage collection test
TEST: ipv6 route garbage collection [ OK ]
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
Tests passed: 225
Tests failed: 0
Signed-off-by: Hangbin Liu <liuhangbin@...il.com>
---
tools/testing/selftests/net/fib_tests.sh | 184 +++++++++++------------
1 file changed, 87 insertions(+), 97 deletions(-)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 66d0db7a2614..b3ecccbbfcd2 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -3,10 +3,8 @@
# This test is for checking IPv4 and IPv6 FIB behavior in response to
# different events.
-
+source lib.sh
ret=0
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
# all tests in this script. Can be overridden with -t option
TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify \
@@ -18,8 +16,6 @@ TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify \
VERBOSE=0
PAUSE_ON_FAIL=no
PAUSE=no
-IP="$(which ip) -netns ns1"
-NS_EXEC="$(which ip) netns exec ns1"
which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
@@ -55,11 +51,11 @@ log_test()
setup()
{
set -e
- ip netns add ns1
- ip netns set ns1 auto
- $IP link set dev lo up
- ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
- ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1
+ setup_ns ns1
+ IP="$(which ip) -netns $ns1"
+ NS_EXEC="$(which ip) netns exec $ns1"
+ ip netns exec $ns1 sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec $ns1 sysctl -qw net.ipv6.conf.all.forwarding=1
$IP link add dummy0 type dummy
$IP link set dev dummy0 up
@@ -72,8 +68,7 @@ setup()
cleanup()
{
$IP link del dev dummy0 &> /dev/null
- ip netns del ns1 &> /dev/null
- ip netns del ns2 &> /dev/null
+ cleanup_ns $ns1 $ns2
}
get_linklocal()
@@ -448,28 +443,25 @@ fib_rp_filter_test()
setup
set -e
- ip netns add ns2
- ip netns set ns2 auto
-
- ip -netns ns2 link set dev lo up
+ setup_ns ns2
$IP link add name veth1 type veth peer name veth2
- $IP link set dev veth2 netns ns2
+ $IP link set dev veth2 netns $ns2
$IP address add 192.0.2.1/24 dev veth1
- ip -netns ns2 address add 192.0.2.1/24 dev veth2
+ ip -netns $ns2 address add 192.0.2.1/24 dev veth2
$IP link set dev veth1 up
- ip -netns ns2 link set dev veth2 up
+ ip -netns $ns2 link set dev veth2 up
$IP link set dev lo address 52:54:00:6a:c7:5e
$IP link set dev veth1 address 52:54:00:6a:c7:5e
- ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e
- ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e
+ ip -netns $ns2 link set dev lo address 52:54:00:6a:c7:5e
+ ip -netns $ns2 link set dev veth2 address 52:54:00:6a:c7:5e
# 1. (ns2) redirect lo's egress to veth2's egress
- ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel
- ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \
+ ip netns exec $ns2 tc qdisc add dev lo parent root handle 1: fq_codel
+ ip netns exec $ns2 tc filter add dev lo parent 1: protocol arp basic \
action mirred egress redirect dev veth2
- ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \
+ ip netns exec $ns2 tc filter add dev lo parent 1: protocol ip basic \
action mirred egress redirect dev veth2
# 2. (ns1) redirect veth1's ingress to lo's ingress
@@ -487,24 +479,24 @@ fib_rp_filter_test()
action mirred egress redirect dev veth1
# 4. (ns2) redirect veth2's ingress to lo's ingress
- ip netns exec ns2 tc qdisc add dev veth2 ingress
- ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \
+ ip netns exec $ns2 tc qdisc add dev veth2 ingress
+ ip netns exec $ns2 tc filter add dev veth2 ingress protocol arp basic \
action mirred ingress redirect dev lo
- ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \
+ ip netns exec $ns2 tc filter add dev veth2 ingress protocol ip basic \
action mirred ingress redirect dev lo
$NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1
$NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1
$NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
- ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
+ ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
+ ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
+ ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
set +e
- run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1"
+ run_cmd "ip netns exec $ns2 ping -w1 -c1 192.0.2.1"
log_test $? 0 "rp_filter passes local packets"
- run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1"
+ run_cmd "ip netns exec $ns2 ping -w1 -c1 127.0.0.1"
log_test $? 0 "rp_filter passes loopback packets"
cleanup
@@ -959,34 +951,32 @@ route_setup()
[ "${VERBOSE}" = "1" ] && set -x
set -e
- ip netns add ns2
- ip netns set ns2 auto
- ip -netns ns2 link set dev lo up
- ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1
- ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1
+ setup_ns ns2
+ ip netns exec $ns2 sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec $ns2 sysctl -qw net.ipv6.conf.all.forwarding=1
$IP li add veth1 type veth peer name veth2
$IP li add veth3 type veth peer name veth4
$IP li set veth1 up
$IP li set veth3 up
- $IP li set veth2 netns ns2 up
- $IP li set veth4 netns ns2 up
- ip -netns ns2 li add dummy1 type dummy
- ip -netns ns2 li set dummy1 up
+ $IP li set veth2 netns $ns2 up
+ $IP li set veth4 netns $ns2 up
+ ip -netns $ns2 li add dummy1 type dummy
+ ip -netns $ns2 li set dummy1 up
$IP -6 addr add 2001:db8:101::1/64 dev veth1 nodad
$IP -6 addr add 2001:db8:103::1/64 dev veth3 nodad
$IP addr add 172.16.101.1/24 dev veth1
$IP addr add 172.16.103.1/24 dev veth3
- ip -netns ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad
- ip -netns ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad
- ip -netns ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad
+ ip -netns $ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad
+ ip -netns $ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad
+ ip -netns $ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad
- ip -netns ns2 addr add 172.16.101.2/24 dev veth2
- ip -netns ns2 addr add 172.16.103.2/24 dev veth4
- ip -netns ns2 addr add 172.16.104.1/24 dev dummy1
+ ip -netns $ns2 addr add 172.16.101.2/24 dev veth2
+ ip -netns $ns2 addr add 172.16.103.2/24 dev veth4
+ ip -netns $ns2 addr add 172.16.104.1/24 dev dummy1
set +e
}
@@ -1238,7 +1228,7 @@ ipv6_addr_metric_test()
log_test $rc 0 "Modify metric of address"
# verify prefix route removed on down
- run_cmd "ip netns exec ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+ run_cmd "ip netns exec $ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
run_cmd "$IP li set dev dummy2 down"
rc=$?
if [ $rc -eq 0 ]; then
@@ -1344,7 +1334,7 @@ ipv6_route_metrics_test()
log_test $rc 0 "Multipath route with mtu metric"
$IP -6 ro add 2001:db8:104::/64 via 2001:db8:101::2 mtu 1300
- run_cmd "ip netns exec ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1"
+ run_cmd "ip netns exec $ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1"
log_test $? 0 "Using route with mtu metric"
run_cmd "$IP -6 ro add 2001:db8:114::/64 via 2001:db8:101::2 congctl lock foo"
@@ -1599,19 +1589,19 @@ ipv4_rt_replace()
ipv4_local_rt_cache()
{
run_cmd "ip addr add 10.0.0.1/32 dev lo"
- run_cmd "ip netns add test-ns"
+ run_cmd "setup_ns test-ns"
run_cmd "ip link add veth-outside type veth peer name veth-inside"
run_cmd "ip link add vrf-100 type vrf table 1100"
run_cmd "ip link set veth-outside master vrf-100"
- run_cmd "ip link set veth-inside netns test-ns"
+ run_cmd "ip link set veth-inside netns $test-ns"
run_cmd "ip link set veth-outside up"
run_cmd "ip link set vrf-100 up"
run_cmd "ip route add 10.1.1.1/32 dev veth-outside table 1100"
- run_cmd "ip netns exec test-ns ip link set veth-inside up"
- run_cmd "ip netns exec test-ns ip addr add 10.1.1.1/32 dev veth-inside"
- run_cmd "ip netns exec test-ns ip route add 10.0.0.1/32 dev veth-inside"
- run_cmd "ip netns exec test-ns ip route add default via 10.0.0.1"
- run_cmd "ip netns exec test-ns ping 10.0.0.1 -c 1 -i 1"
+ run_cmd "ip netns exec $test-ns ip link set veth-inside up"
+ run_cmd "ip netns exec $test-ns ip addr add 10.1.1.1/32 dev veth-inside"
+ run_cmd "ip netns exec $test-ns ip route add 10.0.0.1/32 dev veth-inside"
+ run_cmd "ip netns exec $test-ns ip route add default via 10.0.0.1"
+ run_cmd "ip netns exec $test-ns ping 10.0.0.1 -c 1 -i 1"
run_cmd "ip link delete vrf-100"
# if we do not hang test is a success
@@ -1841,7 +1831,7 @@ ipv4_route_metrics_test()
log_test $rc 0 "Multipath route with mtu metric"
$IP ro add 172.16.104.0/24 via 172.16.101.2 mtu 1300
- run_cmd "ip netns exec ns1 ping -w1 -c1 -s 1500 172.16.104.1"
+ run_cmd "ip netns exec $ns1 ping -w1 -c1 -s 1500 172.16.104.1"
log_test $? 0 "Using route with mtu metric"
run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 congctl lock foo"
@@ -2105,7 +2095,7 @@ ipv4_route_v6_gw_test()
check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1"
fi
- run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1"
+ run_cmd "ip netns exec $ns1 ping -w1 -c1 172.16.104.1"
log_test $rc 0 "Single path route with IPv6 gateway - ping"
run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2"
@@ -2196,7 +2186,7 @@ ipv4_mangle_test()
sleep 2
local tmp_file=$(mktemp)
- ip netns exec ns2 socat UDP4-LISTEN:54321,fork $tmp_file &
+ ip netns exec $ns2 socat UDP4-LISTEN:54321,fork $tmp_file &
# Add a FIB rule and a route that will direct our connection to the
# listening server.
@@ -2254,7 +2244,7 @@ ipv6_mangle_test()
sleep 2
local tmp_file=$(mktemp)
- ip netns exec ns2 socat UDP6-LISTEN:54321,fork $tmp_file &
+ ip netns exec $ns2 socat UDP6-LISTEN:54321,fork $tmp_file &
# Add a FIB rule and a route that will direct our connection to the
# listening server.
@@ -2423,37 +2413,37 @@ ipv4_mpath_list_test()
route_setup
set -e
- run_cmd "ip netns exec ns1 ethtool -K veth1 tcp-segmentation-offload off"
-
- run_cmd "ip netns exec ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
- run_cmd "ip netns exec ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
- run_cmd "ip netns exec ns2 ethtool -K veth2 generic-receive-offload on"
- run_cmd "ip -n ns2 link add name nh1 up type dummy"
- run_cmd "ip -n ns2 link add name nh2 up type dummy"
- run_cmd "ip -n ns2 address add 172.16.201.1/24 dev nh1"
- run_cmd "ip -n ns2 address add 172.16.202.1/24 dev nh2"
- run_cmd "ip -n ns2 neigh add 172.16.201.2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
- run_cmd "ip -n ns2 neigh add 172.16.202.2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
- run_cmd "ip -n ns2 route add 203.0.113.0/24
+ run_cmd "ip netns exec $ns1 ethtool -K veth1 tcp-segmentation-offload off"
+
+ run_cmd "ip netns exec $ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
+ run_cmd "ip netns exec $ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
+ run_cmd "ip netns exec $ns2 ethtool -K veth2 generic-receive-offload on"
+ run_cmd "ip -n $ns2 link add name nh1 up type dummy"
+ run_cmd "ip -n $ns2 link add name nh2 up type dummy"
+ run_cmd "ip -n $ns2 address add 172.16.201.1/24 dev nh1"
+ run_cmd "ip -n $ns2 address add 172.16.202.1/24 dev nh2"
+ run_cmd "ip -n $ns2 neigh add 172.16.201.2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
+ run_cmd "ip -n $ns2 neigh add 172.16.202.2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
+ run_cmd "ip -n $ns2 route add 203.0.113.0/24
nexthop via 172.16.201.2 nexthop via 172.16.202.2"
- run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.fib_multipath_hash_policy=1"
- run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.veth2.rp_filter=0"
- run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0"
- run_cmd "ip netns exec ns2 sysctl -qw net.ipv4.conf.default.rp_filter=0"
+ run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.fib_multipath_hash_policy=1"
+ run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.veth2.rp_filter=0"
+ run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0"
+ run_cmd "ip netns exec $ns2 sysctl -qw net.ipv4.conf.default.rp_filter=0"
set +e
- local dmac=$(ip -n ns2 -j link show dev veth2 | jq -r '.[]["address"]')
+ local dmac=$(ip -n $ns2 -j link show dev veth2 | jq -r '.[]["address"]')
local tmp_file=$(mktemp)
- local cmd="ip netns exec ns1 mausezahn veth1 -a own -b $dmac
+ local cmd="ip netns exec $ns1 mausezahn veth1 -a own -b $dmac
-A 172.16.101.1 -B 203.0.113.1 -t udp 'sp=12345,dp=0-65535' -q"
# Packets forwarded in a list using a multipath route must not reuse a
# cached result so that a flow always hits the same nexthop. In other
# words, the FIB lookup tracepoint needs to be triggered for every
# packet.
- local t0_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+ local t0_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
run_cmd "perf stat -a -e fib:fib_table_lookup --filter 'err == 0' -j -o $tmp_file -- $cmd"
- local t1_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+ local t1_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
local diff=$(echo $t1_rx_pkts - $t0_rx_pkts | bc -l)
list_rcv_eval $tmp_file $diff
@@ -2471,34 +2461,34 @@ ipv6_mpath_list_test()
route_setup
set -e
- run_cmd "ip netns exec ns1 ethtool -K veth1 tcp-segmentation-offload off"
-
- run_cmd "ip netns exec ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
- run_cmd "ip netns exec ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
- run_cmd "ip netns exec ns2 ethtool -K veth2 generic-receive-offload on"
- run_cmd "ip -n ns2 link add name nh1 up type dummy"
- run_cmd "ip -n ns2 link add name nh2 up type dummy"
- run_cmd "ip -n ns2 -6 address add 2001:db8:201::1/64 dev nh1"
- run_cmd "ip -n ns2 -6 address add 2001:db8:202::1/64 dev nh2"
- run_cmd "ip -n ns2 -6 neigh add 2001:db8:201::2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
- run_cmd "ip -n ns2 -6 neigh add 2001:db8:202::2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
- run_cmd "ip -n ns2 -6 route add 2001:db8:301::/64
+ run_cmd "ip netns exec $ns1 ethtool -K veth1 tcp-segmentation-offload off"
+
+ run_cmd "ip netns exec $ns2 bash -c \"echo 20000 > /sys/class/net/veth2/gro_flush_timeout\""
+ run_cmd "ip netns exec $ns2 bash -c \"echo 1 > /sys/class/net/veth2/napi_defer_hard_irqs\""
+ run_cmd "ip netns exec $ns2 ethtool -K veth2 generic-receive-offload on"
+ run_cmd "ip -n $ns2 link add name nh1 up type dummy"
+ run_cmd "ip -n $ns2 link add name nh2 up type dummy"
+ run_cmd "ip -n $ns2 -6 address add 2001:db8:201::1/64 dev nh1"
+ run_cmd "ip -n $ns2 -6 address add 2001:db8:202::1/64 dev nh2"
+ run_cmd "ip -n $ns2 -6 neigh add 2001:db8:201::2 lladdr 00:11:22:33:44:55 nud perm dev nh1"
+ run_cmd "ip -n $ns2 -6 neigh add 2001:db8:202::2 lladdr 00:aa:bb:cc:dd:ee nud perm dev nh2"
+ run_cmd "ip -n $ns2 -6 route add 2001:db8:301::/64
nexthop via 2001:db8:201::2 nexthop via 2001:db8:202::2"
- run_cmd "ip netns exec ns2 sysctl -qw net.ipv6.fib_multipath_hash_policy=1"
+ run_cmd "ip netns exec $ns2 sysctl -qw net.ipv6.fib_multipath_hash_policy=1"
set +e
- local dmac=$(ip -n ns2 -j link show dev veth2 | jq -r '.[]["address"]')
+ local dmac=$(ip -n $ns2 -j link show dev veth2 | jq -r '.[]["address"]')
local tmp_file=$(mktemp)
- local cmd="ip netns exec ns1 mausezahn -6 veth1 -a own -b $dmac
+ local cmd="ip netns exec $ns1 mausezahn -6 veth1 -a own -b $dmac
-A 2001:db8:101::1 -B 2001:db8:301::1 -t udp 'sp=12345,dp=0-65535' -q"
# Packets forwarded in a list using a multipath route must not reuse a
# cached result so that a flow always hits the same nexthop. In other
# words, the FIB lookup tracepoint needs to be triggered for every
# packet.
- local t0_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+ local t0_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
run_cmd "perf stat -a -e fib6:fib6_table_lookup --filter 'err == 0' -j -o $tmp_file -- $cmd"
- local t1_rx_pkts=$(link_stats_get ns2 veth2 rx packets)
+ local t1_rx_pkts=$(link_stats_get $ns2 veth2 rx packets)
local diff=$(echo $t1_rx_pkts - $t0_rx_pkts | bc -l)
list_rcv_eval $tmp_file $diff
--
2.41.0
Powered by blists - more mailing lists