| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231124092121.16866-1-krzysztof.kozlowski@linaro.org>
Date: Fri, 24 Nov 2023 10:21:21 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org,
linux-iio@...r.kernel.org,
linux-mmc@...r.kernel.org,
netdev@...r.kernel.org,
linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-renesas-soc@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-remoteproc@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] dt-bindings: correct white-spaces in examples
Use only one and exactly one space around '=' in DTS example.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Merging idea: Rob's DT.
Should apply cleanly on Rob's for-next.
---
.../devicetree/bindings/auxdisplay/hit,hd44780.yaml | 2 +-
.../devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml | 2 +-
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 6 +++---
.../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +-
.../devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml | 2 +-
.../interrupt-controller/st,stih407-irq-syscfg.yaml | 4 ++--
Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 2 +-
Documentation/devicetree/bindings/net/sff,sfp.yaml | 2 +-
.../devicetree/bindings/pci/toshiba,visconti-pcie.yaml | 2 +-
.../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 6 +++---
.../devicetree/bindings/power/supply/richtek,rt9455.yaml | 8 ++++----
.../devicetree/bindings/regulator/mps,mp5416.yaml | 4 ++--
.../devicetree/bindings/regulator/mps,mpq7920.yaml | 4 ++--
.../devicetree/bindings/remoteproc/fsl,imx-rproc.yaml | 8 ++++----
14 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index fde07e4b119d..406a922a714e 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -113,7 +113,7 @@ examples:
hd44780 {
compatible = "hit,hd44780";
display-height-chars = <2>;
- display-width-chars = <16>;
+ display-width-chars = <16>;
data-gpios = <&pcf8574 4 0>,
<&pcf8574 5 0>,
<&pcf8574 6 0>,
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
index 624984d51c10..7f8d98226437 100644
--- a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -125,7 +125,7 @@ examples:
clk25m: clock-oscillator-25m {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <25000000>;
+ clock-frequency = <25000000>;
clock-output-names = "clk25m";
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 5fcc8dd012f1..be2616ff9af6 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -80,9 +80,9 @@ examples:
compatible = "adi,ad7780";
reg = <0>;
- avdd-supply = <&vdd_supply>;
- powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&vdd_supply>;
+ powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 73def67fbe01..b6a233cd5f6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -58,7 +58,7 @@ examples:
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
index b3a626389870..64abe9a4cd9e 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -46,6 +46,6 @@ examples:
pmic_rradc: adc@...0 {
compatible = "qcom,pmi8998-rradc";
reg = <0x4500>;
- #io-channel-cells = <1>;
+ #io-channel-cells = <1>;
};
};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
index 2b153d7c5421..e44e4e5708a7 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -55,8 +55,8 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq-st.h>
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_cpu>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_cpu>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 2459a55ed540..940b12688167 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -203,7 +203,7 @@ examples:
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
- cd-gpios = <&gpio2 31 0x4>;
+ cd-gpios = <&gpio2 31 0x4>;
st,sig-dir-dat0;
st,sig-dir-dat2;
st,sig-dir-cmd;
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 973e478a399d..bf6cbc7c2ba3 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -120,7 +120,7 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&cps_sfpp0_pins>;
tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
- tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
};
mdio {
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 53da2edd7c9a..120e3bb1e545 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -83,7 +83,7 @@ examples:
<0x0 0x28050000 0x0 0x00010000>,
<0x0 0x24200000 0x0 0x00002000>,
<0x0 0x24162000 0x0 0x00001000>;
- reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+ reg-names = "dbi", "config", "ulreg", "smu", "mpu";
device_type = "pci";
bus-range = <0x00 0xff>;
num-lanes = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index b5ca40d0e251..d476de82e5c3 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -185,17 +185,17 @@ examples:
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
<RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
- power-source = <3300>;
+ power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
- power-source = <3300>;
+ power-source = <3300>;
};
};
};
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 07e38be39f1b..89f9603499b4 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -79,10 +79,10 @@ examples:
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- richtek,output-charge-current = <500000>;
- richtek,end-of-charge-percentage = <10>;
- richtek,battery-regulation-voltage = <4200000>;
- richtek,boost-output-voltage = <5050000>;
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
richtek,min-input-voltage-regulation = <4500000>;
richtek,avg-input-current-regulation = <500000>;
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 0221397eb51e..f825ee9efd81 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -62,8 +62,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index 6de5b027f990..0d34af98403f 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -98,8 +98,8 @@ examples:
regulator-name = "buck1";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <3587500>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <7600000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <7600000>;
regulator-boot-on;
mps,buck-ovp-disable;
mps,buck-phase-delay = /bits/ 8 <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index 30632efdad8b..df36e29d974c 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -113,10 +113,10 @@ examples:
};
imx7d-cm4 {
- compatible = "fsl,imx7d-cm4";
- memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
- syscon = <&src>;
- clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
+ compatible = "fsl,imx7d-cm4";
+ memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+ syscon = <&src>;
+ clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>;
};
- |
--
2.34.1
Powered by blists - more mailing lists