netdev - Re: [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAMuHMdVmD7-AUn91SaOq1iOMkcGhi0WNvx8bCX3oD+xa-Bt98g@mail.gmail.com>
Date: Mon, 4 Dec 2023 10:00:03 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: claudiu beznea <claudiu.beznea@...on.dev>
Cc: s.shtylyov@....ru, davem@...emloft.net, edumazet@...gle.com, 
	kuba@...nel.org, pabeni@...hat.com, robh+dt@...nel.org, 
	krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, linux@...linux.org.uk, 
	magnus.damm@...il.com, mturquette@...libre.com, sboyd@...nel.org, 
	linus.walleij@...aro.org, p.zabel@...gutronix.de, arnd@...db.de, 
	m.szyprowski@...sung.com, alexandre.torgue@...s.st.com, afd@...com, 
	broonie@...nel.org, alexander.stein@...tq-group.com, 
	eugen.hristev@...labora.com, sergei.shtylyov@...il.com, 
	prabhakar.mahadev-lad.rj@...renesas.com, biju.das.jz@...renesas.com, 
	linux-renesas-soc@...r.kernel.org, netdev@...r.kernel.org, 
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
	linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org, 
	linux-gpio@...r.kernel.org, Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH 10/14] arm64: renesas: r9a08g045: Add Ethernet nodes

Hi Claudiu,

On Mon, Dec 4, 2023 at 9:38 AM claudiu beznea <claudiu.beznea@...on.dev> wrote:
> On 04.12.2023 10:02, Geert Uytterhoeven wrote:
> > On Mon, Dec 4, 2023 at 8:41 AM claudiu beznea <claudiu.beznea@...on.dev> wrote:
> >> On 01.12.2023 19:35, Geert Uytterhoeven wrote:
> >>> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@...on.dev> wrote:
> >>>> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> >>>>
> >>>> Add Ethernet nodes available on RZ/G3S (R9A08G045).
> >>>>
> >>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> >>>
> >>> Thanks for your patch!
> >>>
> >>>> --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
> >>>> @@ -149,6 +149,38 @@ sdhi2: mmc@...20000 {
> >>>>                         status = "disabled";
> >>>>                 };
> >>>>
> >>>> +               eth0: ethernet@...30000 {
> >>>> +                       compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
> >>>> +                       reg = <0 0x11c30000 0 0x10000>;
> >>>> +                       interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> >>>> +                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> >>>> +                       interrupt-names = "mux", "fil", "arp_ns";
> >>>> +                       clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
> >>>> +                                <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
> >>>> +                       clock-names = "axi", "chi", "refclk";
> >>>> +                       resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
> >>>> +                       power-domains = <&cpg>;
> >>>
> >>> Perhaps add a default phy mode, like on other SoCs?
> >>>
> >>>     phy-mode = "rgmii"';
> >>
> >> I skipped this (even it was available on the other SoCs) as I consider the
> >> phy-mode is board specific.
> >
> > IC.  Still, it's good to have some consistency across boards.
> >
> >>> Also missing:
> >>>
> >>>     #address-cells = <1>;
> >>>     #size-cells = <0>;
> >>
> >> Same for these.
> >
> > These are required, and always have the same values, so it makes more
> > sense to have them in the SoC .dtsi file, once.
>
> I remember I had a compilation warning with an Ethernet controller
> configured with fixed-link having #address-cells, #size-cells. With
> fixed-link these were not needed.

I think EtherAVB always use MDIO for management, so fixed-link is
not applicable.

> Anyway... I'll keep all in dtsi if you prefer it this way.

Yes please, thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds