[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231205103559.9605-5-fancer.lancer@gmail.com>
Date: Tue, 5 Dec 2023 13:35:25 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Tomer Maimon <tmaimon77@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Serge Semin <fancer.lancer@...il.com>,
openbmc@...ts.ozlabs.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next 04/16] net: pcs: xpcs: Explicitly return error on caps validation
If an unsupported interface is requested to be validated then there is no
need in further capabilities and-ing since the local array will be left
initialized with zeros. Let's explicitly return EINVAL error in that case
in order to inform the caller about invalid link-state interface. In any
case the phylink_validate_mac_and_pcs() would terminate with error further
link-state validation so the suggested update won't change the validation
procedure semantics.
Signed-off-by: Serge Semin <fancer.lancer@...il.com>
---
drivers/net/pcs/pcs-xpcs.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 92c47da61db4..46afeb5510c0 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -613,14 +613,15 @@ static int xpcs_validate(struct phylink_pcs *pcs, unsigned long *supported,
xpcs = phylink_pcs_to_xpcs(pcs);
compat = xpcs_find_compat(xpcs->id, state->interface);
+ if (!compat)
+ return -EINVAL;
/* Populate the supported link modes for this PHY interface type.
* FIXME: what about the port modes and autoneg bit? This masks
* all those away.
*/
- if (compat)
- for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
- set_bit(compat->supported[i], xpcs_supported);
+ for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
+ set_bit(compat->supported[i], xpcs_supported);
linkmode_and(supported, supported, xpcs_supported);
--
2.42.1
Powered by blists - more mailing lists