Message-ID: <20231205103559.9605-9-fancer.lancer@gmail.com>
Date: Tue,  5 Dec 2023 13:35:29 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Jose Abreu <Jose.Abreu@...opsys.com>,
	Maxime Chevallier <maxime.chevallier@...tlin.com>,
	Tomer Maimon <tmaimon77@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>
Cc: Serge Semin <fancer.lancer@...il.com>,
	openbmc@...ts.ozlabs.org,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH net-next 08/16] dt-bindings: net: Add Synopsys DW xPCS bindings

Synopsys DesignWare XPCS IP-core is a Physical Coding Sublayer (PCS) layer
providing an interface between the Media Access Control (MAC) and Physical
Medium Attachment Sublayer (PMA) through a Media independent interface.
>From software point of view it exposes IEEE std. Clause 45 CSR space and
can be accessible either by MDIO or MCI/APB3 bus interfaces. The later
case is described by means of a dedicated DT-bindings which imply having
the DW XPCS Management Interface defined as a DT-supernode which child the
PCSs nodes would be (in the same way as the standard MDIO buses and
devices are normally defined).

Besides of that DW XPCS DT-nodes can have the interrupts and clock source
properties specified. The former one indicates the Clause 73/37
auto-negotiation events like: negotiation page received, AN is completed
or incompatible link partner. The clock DT-properties can describe up to
two clock sources: internal one and the one connected to the chip pad.
Either of them is supposed to be used as the device reference clocks.

Finally the DW XPCS IP-core can be optionally synthesized with a
vendor-specific interface connected to Synopsys PMA (also called
DesignWare Consumer/Enterprise PHY). Alas that isn't auto-detectable
anyhow so if the DW XPCS device has the respective PMA attached then it
should be reflected in the DT-node compatible string so the driver would
be aware of the PMA-specific device capabilities (mainly connected with
CSRs available for the fine-tunings).

Signed-off-by: Serge Semin <fancer.lancer@...il.com>
---
 .../bindings/net/pcs/snps,dw-xpcs.yaml        | 88 +++++++++++++++++++
 .../bindings/net/snps,dw-xpcs-mi.yaml         | 88 +++++++++++++++++++
 2 files changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml
 create mode 100644 Documentation/devicetree/bindings/net/snps,dw-xpcs-mi.yaml

diff --git a/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml
new file mode 100644
index 000000000000..9694ef51abad
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/snps,dw-xpcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Ethernet PCS
+
+maintainers:
+  - Jose Abreu <Jose.Abreu@...opsys.com>
+
+description:
+  Synopsys DesignWare Ethernet Physical Coding Sublayer provides an interface
+  between Media Access Control and Physical Medium Attachment Sublayer through
+  the Media Independent Interface (XGMII, USXGMII, XLGMII, GMII, etc)
+  controlled by means of the IEEE std. Clause 45 registers set. The PCS can be
+  optionally synthesized with a vendor-specific interface connected to
+  Synopsys PMA (also called DesignWare Consumer/Enterprise PHY) although in
+  general it can be used to communicate with any compatible PHY.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys DesignWare XPCS with none or unknown PMA
+        const: snps,dw-xpcs
+      - description: Synopsys DesignWare XPCS with Consumer Gen1 3G PMA
+        const: snps,dw-xpcs-gen1-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen2 3G PMA
+        const: snps,dw-xpcs-gen2-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen2 6G PMA
+        const: snps,dw-xpcs-gen2-6g
+      - description: Synopsys DesignWare XPCS with Consumer Gen4 3G PMA
+        const: snps,dw-xpcs-gen4-3g
+      - description: Synopsys DesignWare XPCS with Consumer Gen4 6G PMA
+        const: snps,dw-xpcs-gen4-6g
+      - description: Synopsys DesignWare XPCS with Consumer Gen5 10G PMA
+        const: snps,dw-xpcs-gen5-10g
+      - description: Synopsys DesignWare XPCS with Consumer Gen5 12G PMA
+        const: snps,dw-xpcs-gen5-12g
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      System interface interrupt output (sbd_intr_o) indicating Clause 73/37
+      auto-negotiation events like':' Page received, AN is completed or
+      incompatible link partner.
+    maxItems: 1
+
+  clocks:
+    description:
+      PCS/PMA interface be can clocked either by internal reference clock
+      source or by an externally connected (via a pad) clock generator.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ core, pad ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio-bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      xgmac_pcs: ethernet-pcs@0 {
+        compatible = "snps,dw-xpcs";
+        reg = <0>;
+
+        interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&ccu_core>, <&ccu_pad>;
+        clock-names = "core", "pad";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/snps,dw-xpcs-mi.yaml b/Documentation/devicetree/bindings/net/snps,dw-xpcs-mi.yaml
new file mode 100644
index 000000000000..67ddba9d61fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dw-xpcs-mi.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dw-xpcs-mi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Ethernet PCS Management Interface
+
+maintainers:
+  - Serge Semin <fancer.lancer@...il.com>
+
+description:
+  Synopsys DesignWare Ethernet PCS provides an interface between MAC and PMA
+  through the Media Independent Interface. The PCS CSRs can be accessible over
+  the Ethernet MDIO bus or directly by means of the APB3/MCI interfaces. In the
+  later case the XPCS can be mapped right to the system IO memory space.
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-xpcs-mi
+
+  reg:
+    items:
+      - description:
+          DW XPCS CSRs space can be either 'directly' or 'indirectly'
+          accessible. In the former case all Clause 45 registers are
+          contiguously mapped within the address space MMD '[20:16]',
+          Reg '[15:0]'. In the later case the space is divided to the
+          multiple 256 register sets. There is a special viewport CSR
+          which is responsible for the set selection. The upper part of
+          the CSR address is supposed to be written in there thus the
+          corresponding subset would be mapped over the lowest 255 CSRs.
+
+  reg-names:
+    items:
+      - enum: [ direct, indirect ]
+
+  reg-io-width:
+    description:
+      The way the CSRs are mapped to the memory is platform depended. Since
+      each Clause 45 CSR is of 16-bits wide the access instructions must be
+      two bytes aligned at least.
+    default: 2
+    enum: [ 2, 4 ]
+
+  clocks:
+    items:
+      - description: Peripheral MCI/APB3 bus clock source
+
+  clock-names:
+    items:
+      - const: pclk
+
+patternProperties:
+  'ethernet-pcs@[0-9a-f]+$':
+    type: object
+
+    $ref: pcs/snps,dw-xpcs.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@...5d000 {
+      compatible = "snps,dw-xpcs-mi";
+      reg = <0x1f05d000 0x1000>;
+      reg-names = "indirect";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clocks = <&ccu_pclk>;
+      clock-names = "pclk";
+
+      reg-io-width = <4>;
+
+      ethernet-pcs@0 {
+        compatible = "snps,dw-xpcs";
+        reg = <0>;
+      };
+    };
-- 
2.42.1

Powered by blists - more mailing lists