[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231205103559.9605-14-fancer.lancer@gmail.com>
Date: Tue, 5 Dec 2023 13:35:34 +0300
From: Serge Semin <fancer.lancer@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Tomer Maimon <tmaimon77@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Serge Semin <fancer.lancer@...il.com>,
openbmc@...ts.ozlabs.org,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH net-next 13/16] net: stmmac: intel: Register generic MDIO device
The DW XPCS driver has been updated to being bindable with the respective
MDIO device registered during the MDIO bus probe procedure. As an example
of using that feature let's convert the Intel mGBE low-level driver to
registering the MDIO-device board info. Thus the registered DW XPCS device
will be a subject of the fine-tunings performed during the MDIO-device
probe procedures.
Signed-off-by: Serge Semin <fancer.lancer@...il.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 31 ++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 60283543ffc8..7642c11abc59 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -4,6 +4,7 @@
#include <linux/clk-provider.h>
#include <linux/pci.h>
+#include <linux/phy.h>
#include <linux/dmi.h>
#include "dwmac-intel.h"
#include "dwmac4.h"
@@ -585,6 +586,28 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
/* Intel mgbe SGMII interface uses pcs-xcps */
if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII ||
plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) {
+ struct mdio_board_info *xpcs_info;
+
+ xpcs_info = devm_kzalloc(&pdev->dev,
+ sizeof(*xpcs_info) + MII_BUS_ID_SIZE,
+ GFP_KERNEL);
+ if (!xpcs_info) {
+ ret = -ENOMEM;
+ goto err_alloc_info;
+ }
+
+ xpcs_info->bus_id = (void *)xpcs_info + sizeof(*xpcs_info);
+ snprintf((char *)xpcs_info->bus_id, MII_BUS_ID_SIZE,
+ "stmmac-%x", plat->bus_id);
+
+ snprintf(xpcs_info->modalias, MDIO_NAME_SIZE, "dwxpcs");
+
+ xpcs_info->mdio_addr = INTEL_MGBE_XPCS_ADDR;
+
+ ret = mdiobus_register_board_info(xpcs_info, 1);
+ if (ret)
+ goto err_alloc_info;
+
plat->mdio_bus_data->has_xpcs = true;
plat->mdio_bus_data->xpcs_an_inband = true;
}
@@ -600,7 +623,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
fwnode_handle_put(fixed_node);
}
- /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
+ /* Ensure mdio bus PHY-scan skips intel serdes and pcs-xpcs */
plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;
@@ -618,6 +641,12 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
plat->msi_tx_base_vec = 1;
return 0;
+
+err_alloc_info:
+ clk_disable_unprepare(clk);
+ clk_unregister_fixed_rate(clk);
+
+ return ret;
}
static int ehl_common_data(struct pci_dev *pdev,
--
2.42.1
Powered by blists - more mailing lists